انتقل إلى المحتوى
تسجيل الدخولاطلب عرضاً

← كل العمليات

Aromatics complex (BTX, paraxylene)

Petrochemical process

An aromatics complex turns naphtha reformate and pyrolysis gasoline into benzene, toluene and xylenes, with paraxylene as the main prize. Paraxylene then feeds the polyester chain.

اللقيم
Heavy naphtha (reformer feed) and pyrolysis gasoline
ينتج
Benzene, Toluene, Paraxylene, Orthoxylene, Hydrogen
درجة الحرارة
Reforming and isomerisation steps are catalytic at several hundred C; paraxylene crystallisation is cold
المحفّز
Platinum-based reforming catalyst; zeolite for isomerisation and toluene conversion

مخطط سير العملية

ما يفعله

Naphtha is first reformed over a catalyst to create an aromatic-rich liquid called reformate, and steam crackers add a similar stream called pyrolysis gasoline. Aromatics are pulled out of these streams by solvent extraction or extractive distillation, with solvents such as sulfolane. Benzene, toluene and mixed xylenes are then separated by distillation. Toluene can be converted to benzene and xylenes, and the xylene isomers are shifted by isomerisation towards the most valuable one, paraxylene. Paraxylene is recovered either by crystallisation at low temperature or by adsorption on a molecular sieve, and the rest is recycled.

خطوة بخطوة

  1. Hydrotreat naphtha and reform to reformate
  2. Extract aromatics from reformate and pygas
  3. Split benzene, toluene and xylenes by distillation
  4. Convert toluene (disproportionation) to benzene and xylenes
  5. Isomerise xylenes towards paraxylene
  6. Recover paraxylene by crystallisation or adsorption
  7. Recycle the depleted xylene stream to isomerisation

الكيمياء

Reforming turns naphthenes and paraffins into aromatic rings and hydrogen. Xylene isomerisation shifts the methyl groups around the ring, and toluene disproportionation swaps a methyl group between rings to give benzene and xylene.

التفاعلات، مرسومة ذرة بذرة

Dehydrogenation of cyclohexaneC1CCCCC1c1ccccc1[H][H][H][H][H][H]C6H12 -> C6H6 + 3 H2Model for the key naphthene-to-aromatic step in reforming.
Toluene disproportionationCc1ccccc1Cc1ccccc1c1ccccc1Cc1ccc(C)cc12 C7H8 -> C6H6 + C8H10Gives benzene and paraxylene.
Xylene isomerisationCc1ccccc1CCc1ccc(C)cc1o-xylene -> p-xyleneShifts xylenes towards the paraxylene needed for terephthalic acid.

المعدات الرئيسية

  • Reformer reactors
  • Extraction column
  • Splitter columns
  • Isomerisation reactor
  • Crystalliser or adsorption chambers
  • Heat exchangers

السلامة

Benzene is a known carcinogen, so aromatics units need leak detection, closed sampling and vapour controls.

في الخليج

The Noori Petrochemical Complex in Assaluyeh, Iran, is described as the world's largest aromatics plant at about 4.2 million tonnes per year. Gulf refiners with reformers also supply aromatics, and some of the paraxylene is exported to Asian polyester producers.

اختبر نفسك

السؤال 1 من 3 · النتيجة 0 · السلسلة 0

Which solvent is commonly used for aromatics extraction?

ذات صلة

المصادر

كُتب بأسلوب PST من المصادر أعلاه. الثقة في البيانات: high. تختلف المصانع الفعلية في التصميم وظروف التشغيل.