Skip to content

Gas · ISO 9162 and EN 589, or the buyer's mix

LPG (propane, butane and mixes)

Liquefied petroleum gas for cooking, heating and petrochemicals. The Gulf is a leading exporter. Cargoes are propane, butane or a stated mix, carried in pressurised or refrigerated gas carriers.

Request LPG (propane, butane and mixes)
  • 8Parameters
  • 4With a limit
  • 4Off-spec causes explained
  • Sulphurmax 50 mg/kg
Typical colour, laboratory glass
Laboratory glass sample of LPG (propane, butane and mixes), in its typical colour
A sample of LPG (propane, butane and mixes) in laboratory glass on a dark studio background, so the colour is easy to judge.
Reference photograph
How LPG (propane, butane and mixes) is stored and moved in practice.

Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo. Photograph: made from a reference photo by W. Bulach, CC BY-SA 4.0, via Wikimedia Commons.

Stir the liquid to feel how thick it is

Move the mouse or a finger across the liquid. Press and drag to stir harder. Keyboard: arrow keys stir, Space shakes.

Very thin
Colour follows the typical colour of LPG (propane, butane and mixes).
Thin and looseThick and heavy

Very thin Water-thin or thinner. Ripples run fast and ring for a long time.

Stir speed
0 px/s
Liquid movement
0%
Settled after
-
Surface
Still

The class is a guide for feel. The viscosity figure shown is the one in the specification data.

How it looks

Colourless gas, liquid under pressure, with a stench agent added for leak detection. You cannot judge it by eye, so quality is shown by composition and vapour pressure on the certificate.

Where it is used

  • Household cooking and heating
  • Autogas
  • Petrochemical feedstock
  • Industrial burners

Handling and safety

  • Pressurised or refrigerated gas carriers and bonded gas terminals only.
  • State the exact grade and the mix ratio in the contract.
  • Independent surveyor for quantity (cargo calculation) and composition at both ends.

Typical properties

Propane content (propane grade)
min 90 % vol
Butane content (butane grade)
min 90 % vol
Total sulphur
max 50 mg/kg
Copper strip corrosion (1 h, 40 °C)
max 1 class

The specification

ISO 9162 and EN 589, or the buyer's mix. Limits are the commonly published ones. Your contract and the current edition of the standard decide.

ParameterLimitTest methodWhat it protects
Propane content (propane grade)min 90 % volISO 7941 / ASTM D2163Defines the grade and the vapour pressure.
Butane content (butane grade)min 90 % volISO 7941 / ASTM D2163Defines the grade.
Vapour pressure at 40 °Creport kPaISO 4256 / ASTM D1267Tank and ship pressure rating. Propane runs near 1,300 kPa, butane near 380 kPa.
Total sulphurmax 50 mg/kgISO 4260 / ASTM D6667Corrosion and fumes.
Hydrogen sulphidereport ISO 8819 / ASTM D2420Must be absent: it is toxic and corrosive.
Copper strip corrosion (1 h, 40 °C)max 1 classISO 6251 / ASTM D1838Shows corrosive sulphur.
Residue (evaporation)report mg/kgISO 13757Heavy contaminants that foul regulators.
Free waterreport visualMust be absent: ice blocks lines.

Why a cargo goes off spec

When one parameter fails, it usually points to one cause. Here is what to look for.

Propane content (propane grade)min 90 % vol

Too lowButane or ethane mixed in.

Why it mattersDefines the grade and the vapour pressure.

Butane content (butane grade)min 90 % vol

Too lowPropane or pentane mixed in.

Why it mattersDefines the grade.

Total sulphurmax 50 mg/kg

Too highUnsweetened stream.

Why it mattersCorrosion and fumes.

Copper strip corrosion (1 h, 40 °C)max 1 class

Too highActive sulphur compounds.

Why it mattersShows corrosive sulphur.

Check your own certificate

Type the values, paste the certificate text, or upload a PDF or photo. The checker names every parameter that is off spec and the usual reason.

or paste the certificate text
ParameterLimitYour valueResult
Propane content (propane grade)ISO 7941 / ASTM D2163min 90 % volenter a value
Butane content (butane grade)ISO 7941 / ASTM D2163min 90 % volenter a value
Vapour pressure at 40 °CISO 4256 / ASTM D1267report kPaenter a value
Total sulphurISO 4260 / ASTM D6667max 50 mg/kgenter a value
Hydrogen sulphideISO 8819 / ASTM D2420report enter a value
Copper strip corrosion (1 h, 40 °C)ISO 6251 / ASTM D1838max 1 classenter a value
Residue (evaporation)ISO 13757report mg/kgenter a value
Free watervisualreport enter a value

Sources

Indicative information for professional users. Not a substitute for the standard, a contract or an independent inspector.