Crude oils and condensates
Soroosh and Nowruz
Soroosh and Nowruz is an Iranian heavy, high-sulphur offshore blend at about 18 to 19 degrees API and 3.4 to 3.5 percent sulphur, listed with Kharg Island.
← Todos los productosTambién llamado: Soroush, Nowruz, Soroosh/Nowruz blend
- Densidad939 to 946 kg/m³
- AzufreAbout 3.4 to 3.5 % m/m (assay table)
- PeligroUN1267, Class 3 (flammable liquid); packing group depends on flash point and initial boiling point


Créditos de las imágenes Las muestras en vidrio de laboratorio se elaboran a partir de fotos de referencia de Wikimedia Commons de Chemik10 (CC BY-SA 2.5) y una foto de muestra de petróleo CC0. Fotografía: elaborada a partir de una foto de referencia de Glasbruch2007, CC BY-SA 3.0, vía Wikimedia Commons.
Agite el líquido para sentir su espesor
Mueva el ratón o un dedo sobre el líquido. Mantenga pulsado y arrastre para agitar con más fuerza. Teclado: las flechas agitan, la barra espaciadora sacude.
Muy fino Fino como el agua o más. Las ondas corren rápido y duran mucho.
- Velocidad de agitación
- 0 px/s
- Movimiento del líquido
- 0%
- Se calma tras
- -
- Superficie
- Quieto
La clase es solo una guía de sensación. La viscosidad indicada es la de los datos de la especificación.
Aspecto
Brown to black liquid
Dónde se utiliza
- Feedstock for deep-conversion refineries
- Source of fuel oil and bitumen
- Blending to adjust slate density
Manipulación y seguridad
- Crude moves by pipeline to a terminal, is stored in floating-roof tanks and is loaded by loading arms or single point moorings onto tankers under inert gas. Independent inspectors sample under ASTM D4057 or API MPMS Chapter 8, measure water and sediment and quantity, and issue a quality and quantity certificate at loading.
- UN 1267 is the shipping name 'Petroleum crude oil'. Vapours are heavier than air and may carry hydrogen sulphide and benzene; static ignition is a risk during loading, so tanks and decks need gas monitoring and inerting.
Propiedades típicas
- Aspecto
- Brown to black liquid
- Densidad a 15 °C
- 939 to 946 kg/m³
- Azufre típico
- About 3.4 to 3.5 % m/m (assay table)
◉What it is
A named crude grade is a stream that is gathered, blended and delivered from a defined export point so that cargoes keep a consistent quality. An assay table lists a combined Nowruz/Soroush grade at 18 to 19 degrees API and 3.4 to 3.5 percent sulphur, with Kharg Island as the terminal. The source does not give separate figures for each field. The density range in the properties is derived from the API gravity range with the standard conversion (relative density = 141.5 / (API + 131.5)); it is a calculation, not a published density. Pour point, flash point, viscosity and boiling range are not published in the sources checked, so they are left blank rather than guessed.
⬡What it is made of
A heavy, high-sulphur crude with a large residue fraction. About 18 to 19 degrees API.
⚛La química
Crude oil is a continuous mixture of hydrocarbons: alkanes (paraffins), cycloalkanes (naphthenes) and aromatics such as benzene, plus heavy resins and asphaltenes. Sulphur sits mainly in thiols, sulphides and thiophenes and in dissolved hydrogen sulphide; the more of it a crude carries, the more hydrotreating a refinery needs to meet fuel sulphur limits. Lighter crudes contain a higher share of short, saturated chains that boil at low temperatures.
⚙How it is made
Produced offshore Iran (the Soroosh and Nowruz fields) and loaded at Kharg Island according to the table.
▶How it works
API gravity is 141.5 divided by relative density at 60 F, minus 131.5, so a higher figure means a lighter crude. In a refinery the crude is first split in an atmospheric distillation unit and the cuts are upgraded in hydrotreaters, reformers and crackers. Pricing terms are not published in the sources checked.
▣Storage, loading and inspection
Crude moves by pipeline to a terminal, is stored in floating-roof tanks and is loaded by loading arms or single point moorings onto tankers under inert gas. Independent inspectors sample under ASTM D4057 or API MPMS Chapter 8, measure water and sediment and quantity, and issue a quality and quantity certificate at loading.
★Why it matters in the Gulf
One of the heaviest grades loaded at Kharg. No volume claim is made.
Moléculas clave
Normas y especificaciones
| ASTM D4052 / ISO 12185 | Density by digital density meter, used to derive API gravity for cargo documents. |
|---|---|
| ASTM D4294 / ISO 8754 | Sulphur content by X-ray fluorescence. |
| ASTM D4057 / API MPMS Ch. 8.1 | Manual sampling of petroleum liquids for cargo quality determination. |
| ASTM D5853 | Pour point of crude oils; relevant to waxy grades. |
| Producer sales specification | A grade is sold against the producer's own assay and quality specification, not one public standard. |
Peligros
UN 1267 is the shipping name 'Petroleum crude oil'. Vapours are heavier than air and may carry hydrogen sulphide and benzene; static ignition is a risk during loading, so tanks and decks need gas monitoring and inerting.
Cómo se comercializa
Units
Barrels (bbl); cargo sizes in thousand barrels; US dollars per barrel
Benchmarks
Not published in the sources checked
Typical cargo
VLCC about 2 million barrels, Suezmax about 1 million barrels, Aframax about 600,000 barrels (depends on terminal draft)
Incoterms
FOB at the loading terminal is common; CFR or CIF for delivered sales
Notes
Iranian trade is subject to sanctions.
¿Sabía que…?
💡 It is one of the few grades listed here below 20 degrees API.
Póngase a prueba sobre Soroosh and Nowruz
About what gravity range does the table give for Nowruz/Soroush?
Más de este grupo
- Arab Extra Light
- Arab Light
- Arab Medium
- Arab Heavy
- Murban
- Upper Zakum
- Das Blend
- Umm Lulu
- Basrah Medium
- Basrah Heavy
- Kuwait Export Blend
- Qatar Marine
Fuentes
- Wikipedia: List of crude oil products
- Wikipedia: Kharg Island
- Wikipedia: List of UN numbers 1201 to 1300
Redactado con palabras propias de PST a partir de las fuentes anteriores. Fiabilidad de los datos: medium. Los valores típicos varían según el origen y el contrato, por lo que debe leer siempre la especificación de su propio contrato.



