پرش به محتوا

← همهٔ فرایندها

Lube oil refining (base oil chain)

Refinery process

Base oil production turns vacuum distillate cuts into lubricant base oils by removing aromatics and wax. Modern hydroprocessing routes make higher-quality oils than the older solvent routes.

خوراک
Vacuum distillates and deasphalted oil, or hydrocracker unconverted oil
تولید می‌کند
Group I, II and III base oils, Slack wax, Aromatic extract, Bright stock
کاتالیست
Hydroprocessing catalysts in modern routes; solvents (phenol, furfural) in older routes

جریان فرایند

کارکرد

Lube base oil starts with vacuum distillates, mostly in the range of 26 to 40 carbon atoms. Solvent extraction with phenol or furfural removes aromatics, which lowers viscosity index and oxidation stability. Dewaxing then removes the long-chain paraffins that would solidify at low temperature, either by chilling and crystallising the wax or by isomerising it into branched molecules. A final hydrogenation step removes remaining aromatics, sulphur and nitrogen to improve stability and colour. Residue from vacuum distillation can also be deasphalted to give bright stock. The oils are graded by the API system from Group I to Group V.

گام‌به‌گام

  1. Vacuum distillate cuts of different viscosity are taken
  2. Aromatics are extracted by solvent or removed by hydrocracking
  3. Waxy paraffins are removed by chilling or catalytic isomerisation
  4. Hydrogen finishing removes traces of aromatics, sulphur and nitrogen
  5. The oil is stripped and fractionated by viscosity grade
  6. Base oils are tested for viscosity index and saturates
  7. Finished base oils go to blending with additives

شیمی

Aromatic and heavy cyclic molecules reduce viscosity index and degrade quickly, so they are removed or saturated. Straight wax molecules are removed or converted to branched isomers that stay liquid at low temperatures. Group I has VI 80 to under 120 and below 90 percent saturates; Group III has VI 120 or higher and is made by hydroprocessing.

واکنش‌ها، اتم به اتم ترسیم‌شده

Hydroisomerisation dewaxing of a waxCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC(C)CCCCCCCCCn-C20H42 -> branched C20H42Branching lowers the pour point.

تجهیزات اصلی

  • Solvent extraction tower
  • Dewaxing unit with chilling or catalytic reactor
  • Hydrofinishing reactor
  • Vacuum stripper
  • Solvent recovery

ایمنی

Solvents such as phenol and furfural are toxic and flammable, and hydroprocessing units operate at high pressure with hydrogen.

خودتان را بسنجید

پرسش 1 از 3 · امتیاز 0 · رکورد پیاپی 0

Which solvents extract aromatics in the older route?

مرتبط

منابع

با بیان خود PST و بر پایهٔ منابع بالا نوشته شده است. اطمینان از داده: medium. واحدهای واقعی از نظر طراحی و شرایط بهره‌برداری تفاوت دارند.