Ethylene to polyethylene (HDPE, LDPE, LLDPE)
Petrochemical process
Polyethylene is made by linking ethylene molecules into long chains, either at very high pressure with radicals (LDPE) or at mild pressure with catalysts (HDPE, LLDPE). It is the most widely used plastic.
- फ़ीड
- Polymer-grade ethylene, with optional comonomers (butene, hexene, octene) and hydrogen for control
- बनाता है
- HDPE pellets, LDPE pellets, LLDPE pellets
- तापमान
- Low-pressure processes are mild; LDPE is radical-initiated
- दबाव
- LDPE 1000 to 3000; HDPE and LLDPE low pressure
- उत्प्रेरक
- Chromium or Ziegler-Natta or metallocene (HDPE, LLDPE); radical initiator (LDPE)
प्रोसेस फ़्लो
यह क्या करता है
Ethylene gas is polymerised in reactors, and the choice of process fixes the polymer structure. In the high-pressure process, free radicals start chains at about 1000 to 3000 bar and create a highly branched, low-density product (LDPE). In low-pressure processes, chromium, Ziegler-Natta or metallocene catalysts build more linear chains at mild conditions, giving high-density polyethylene (HDPE). Adding a short alpha-olefin such as 1-butene, 1-hexene or 1-octene produces linear low-density polyethylene (LLDPE). The polymer powder or melt is then degassed, mixed with additives and pelletised for sale.
क़दम दर क़दम
- Purify ethylene and comonomer feeds
- Feed to the reactor with catalyst or initiator
- Polymerise (loop, gas-phase, solution or high-pressure reactor)
- Separate polymer from unreacted gas and recycle
- Degas and stabilise with additives
- Extrude and pelletise
- Pack and ship in bags, bulk or containers
रसायन विज्ञान
Ethylene's C=C double bond opens and joins to the next molecule, repeating thousands of times. Density is set by branching: LDPE 0.910 to 0.940 g/cm3, LLDPE 0.915 to 0.925 g/cm3, HDPE 0.941 g/cm3 or higher.
अभिक्रियाएँ, परमाणु-दर-परमाणु बनाई गईं
मुख्य उपकरण
- Loop or gas-phase reactor
- High-pressure autoclave or tubular reactor
- Hyper-compressor
- Degassing silo
- Extruder
- Pelletiser
सुरक्षा
High-pressure ethylene systems can decompose violently and polymer dust is a combustible hazard, so tight control of pressure and temperature is essential.
खाड़ी क्षेत्र में
QAPCO at Mesaieed runs three LDPE plants with a combined capacity of 780,000 tonnes a year, based on ethylene from its own 840,000 tonne cracker. Borouge in Ruwais and SABIC affiliates in Jubail and Yanbu are other large Gulf polyethylene producers that export to Asia, Africa and Europe.
ख़ुद को परखें
Which pressure range is quoted for making LDPE?
संबंधित
- Steam crackingPetrochemical process
- Ethylene oxide and mono-ethylene glycol (MEG)Petrochemical process
- Propylene to polypropylenePetrochemical process
- Ruwais (Borouge, Borouge 4, Fertiglobe, ADNOC Ruwais)Complex or hub
स्रोत
ऊपर दिए स्रोतों के आधार पर PST के अपने शब्दों में लिखा गया। डेटा की विश्वसनीयता: high। असली प्लांट डिज़ाइन और संचालन की स्थितियों में अलग होते हैं।