सामग्री पर जाएँ

← सभी प्रक्रियाएँ

Visbreaking

Refinery process

Visbreaking is a mild thermal cracking process that lowers the viscosity of vacuum residue. It lets refiners blend fuel oil with less expensive diluent or make extra middle distillate.

फ़ीड
Vacuum residue (sometimes atmospheric residue)
बनाता है
Visbroken tar (fuel oil component), Gas oil, Naphtha, Gas and LPG
तापमान
About 425 for mild cracking, up to about 500 for very severe
उत्प्रेरक
None (thermal process)

प्रोसेस फ़्लो

यह क्या करता है

Vacuum residue is thick and would need large amounts of lighter oil to make marketable fuel oil. A visbreaker heats the residue in a furnace to a controlled severity so a modest amount of cracking occurs. The product is thinner, with the same sulphur content but lower viscosity, and some gas, naphtha and gas oil are formed. Two designs exist: coil units crack in the furnace tubes, while soaker units hold the oil in a drum after the furnace at a lower temperature. Severity is limited because over-cracking makes the fuel oil unstable and causes sediment.

क़दम दर क़दम

  1. Residue is preheated
  2. A furnace heats it to the chosen severity
  3. Coil design cracks in the tubes; soaker design holds the oil in a drum
  4. The effluent is quenched to stop reactions
  5. Fractionation separates gas, naphtha and gas oil
  6. Tar from the bottom may be vacuum flashed
  7. Reduced-viscosity residue goes to fuel oil

रसायन विज्ञान

Heat breaks the long alkyl side chains and bridges of residue molecules by free-radical cracking, giving smaller molecules that act as a thinner carrier for the heavy asphaltenes. Too much conversion makes asphaltenes drop out as sediment.

अभिक्रियाएँ, परमाणु-दर-परमाणु बनाई गईं

Thermal cracking of a paraffin chainCCCCCCCCCCCCCCCCCCC=CCCCCC12H26 -> C6H14 + C6H12Chain scission to smaller alkane and alkene.

सामान्य यील्ड

  • 76% Tar
  • 15% Middle distillates
  • 6% Gasoline
  • 3% Gas and LPG

मुख्य उपकरण

  • Visbreaker furnace
  • Soaker drum
  • Fractionator
  • Vacuum flasher (optional)

सुरक्षा

Furnace tube coking can lead to hot spots and tube failure; hot tar is a fire and burn hazard.

ख़ुद को परखें

सवाल 1/3 · स्कोर 0 · लकीर 0

What does visbreaking mainly reduce?

संबंधित

स्रोत

ऊपर दिए स्रोतों के आधार पर PST के अपने शब्दों में लिखा गया। डेटा की विश्वसनीयता: high। असली प्लांट डिज़ाइन और संचालन की स्थितियों में अलग होते हैं।