Passare al contenuto

← Tutti i processi

Flexicoking and fluid coking

Refinery process

Fluid coking and Flexicoking convert heavy residue into lighter liquids and coke in a fluidised bed of hot coke particles. Flexicoking adds a gasifier so most of the coke is turned into a low-calorific fuel gas.

Carica
Vacuum residue or other very heavy oils
Produce
Coker naphtha and gas oils, Fuel gas (Flexicoking), Reduced coke production, Hydrogen sulphide for sulphur recovery
Catalizzatore
None (thermal process); steam and air for gasification

Schema di processo

Cosa fa

Instead of filling drums in batches, a fluid coker sprays residue onto a bed of fine, hot coke particles. The oil cracks into vapours and a thin new layer of coke on the particles, and the process runs continuously. Particles move between a reactor and a heater or burner, which supplies heat. In Flexicoking a gasifier vessel is added in which part of the coke reacts with air and steam to make a gas rich in carbon monoxide and hydrogen. This gas can be burned as refinery fuel after sulphur removal, so very little coke is left to sell. Liquids go to a fractionator like those of other cokers.

Passo dopo passo

  1. Residue is fed to the fluidised reactor bed of hot coke
  2. Oil cracks on the particles, forming vapour and more coke
  3. Vapours go to a scrubber and fractionator
  4. Coke particles circulate to the heater
  5. In Flexicoking a gasifier reacts coke with steam and air
  6. The resulting gas is cleaned of sulphur
  7. Excess coke is withdrawn as a small purge

La chimica

Thermal cracking behaves as in other cokers, giving lighter alkanes and alkenes and a hydrogen-poor carbon residue. In the gasifier, carbon reacts with steam to form carbon monoxide and hydrogen, and carbon monoxide reacts further with steam by the water-gas shift reaction.

Reazioni, illustrate atomo per atomo

Steam gasification of coke[C]O[C-]#[O+][H][H]C + H2O -> CO + H2Endothermic reaction in the gasifier.
Water-gas shift[C-]#[O+]OO=C=O[H][H]CO + H2O -> CO2 + H2Adjusts the CO and H2 ratio.

Apparecchiature principali

  • Reactor
  • Heater or burner
  • Gasifier
  • Venturi scrubber
  • Fractionator
  • Gas treating

Sicurezza

Hot fluidised solids and carbon monoxide-rich gas bring fire, explosion and toxic gas risks, and erosion of vessels by particles is a maintenance issue.

Si metta alla prova

Domanda 1 di 3 · Punteggio 0 · Serie 0

What type of feed goes to a fluid coker?

Correlati

Fonti

Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: low. Gli impianti reali differiscono per progetto e condizioni di esercizio.