Solvent deasphalting
Refinery process
Solvent deasphalting uses a light hydrocarbon such as propane or butane to precipitate asphalt from vacuum residue. It yields a cleaner deasphalted oil for cracking or lubricants.
- Carica
- Vacuum residue
- Produce
- Deasphalted oil (DAO), Asphalt (pitch), Recovered solvent (recycled)
- Catalizzatore
- None (physical extraction); propane, butane or pentane solvent
Schema di processo
Cosa fa
Vacuum residue contains asphaltenes and metals that poison catalysts. In deasphalting, the residue is mixed with a light solvent that dissolves the oily aliphatic fraction but not the asphaltenes. The asphalt phase settles out, and the solvent is then recovered from both streams and recycled. The choice of solvent controls the result: propane gives the best quality deasphalted oil but a low yield, while pentane gives much higher yield but with more metals and carbon residue. The asphalt can be blended into bitumen or fuel oil or fed to a gasifier or coker.
Passo dopo passo
- Vacuum residue is mixed with solvent
- The mixture enters an extractor
- Asphalt separates as a heavy phase
- DAO dissolved in solvent leaves the top
- Solvent is recovered by flashing and stripping
- DAO goes to cracking or lube processing
- Asphalt is cooled and sent to blending or upgrading
La chimica
No chemical reaction is intended. Light alkanes dissolve molecules similar to themselves, so saturated oils dissolve while polar, aromatic asphaltenes do not and precipitate.
Apparecchiature principali
- Extractor
- Solvent recovery columns
- Supercritical solvent recovery (some designs)
- Asphalt stripper
Sicurezza
Light hydrocarbon solvent is highly flammable and large inventories must be contained.
Si metta alla prova
What solvents are used?
Correlati
- Vacuum distillation (VDU)Refinery process
- Lube oil refining (base oil chain)Refinery process
- Bitumen production and blowingRefinery process
- Fluid catalytic cracking (FCC and residue RFCC)Refinery process
Fonti
Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: high. Gli impianti reali differiscono per progetto e condizioni di esercizio.