Crude oils and condensates
Umm Lulu
Umm Lulu is an ADNOC offshore light crude started in late 2018, reported at about 39 degrees API and 0.7 percent sulphur, exported from Zirku Island.
← Tutti i prodottiDetto anche: Umm Lulu crude
- Densità829 to 831 kg/m³
- ZolfoAbout 0.7 % m/m (as reported at launch)
- PericoloUN1267, Class 3 (flammable liquid); packing group depends on flash point and initial boiling point


Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0. Fotografia: realizzata da una foto di riferimento di Glasbruch2007, CC BY-SA 3.0, tramite Wikimedia Commons.
Agitate il liquido per sentire quanto è denso
Muovete il mouse o un dito sul liquido. Premete e trascinate per agitare più forte. Tastiera: le frecce agitano, Spazio scuote.
Molto fluido Sottile come l'acqua o più. Le onde corrono veloci e durano a lungo.
- Velocità di agitazione
- 0 px/s
- Movimento del liquido
- 0%
- Si calma dopo
- -
- Superficie
- Fermo
La classe è solo una guida alla sensazione. Il valore di viscosità mostrato è quello dei dati di specifica.
Aspetto
Brown to black liquid
Dove si usa
- Refinery feedstock for light products
- Blending component
- Source of middle distillates
Manipolazione e sicurezza
- Crude moves by pipeline to a terminal, is stored in floating-roof tanks and is loaded by loading arms or single point moorings onto tankers under inert gas. Independent inspectors sample under ASTM D4057 or API MPMS Chapter 8, measure water and sediment and quantity, and issue a quality and quantity certificate at loading.
- UN 1267 is the shipping name 'Petroleum crude oil'. Vapours are heavier than air and may carry hydrogen sulphide and benzene; static ignition is a risk during loading, so tanks and decks need gas monitoring and inerting.
Proprietà tipiche
- Aspetto
- Brown to black liquid
- Densità a 15 °C
- 829 to 831 kg/m³
- Zolfo tipico
- About 0.7 % m/m (as reported at launch)
◉What it is
A named crude grade is a stream that is gathered, blended and delivered from a defined export point so that cargoes keep a consistent quality. Reports at the stream's 2018 launch (Reuters, Argaam and an ADNOC release, as shown in search results) gave Umm Lulu at about 38.7 to 39 degrees API and about 0.7 percent sulphur, light and low in sulphur. It is a blend from the Umm Lulu and Sarb fields processed and exported at Zirku Island. These were seen as search excerpts only; the numbers are marked low confidence. The density range in the properties is derived from the API gravity range with the standard conversion (relative density = 141.5 / (API + 131.5)); it is a calculation, not a published density. Pour point, flash point, viscosity and boiling range are not published in the sources checked, so they are left blank rather than guessed.
⬡What it is made of
A light, low-sulphur offshore crude rich in light middle distillates, according to ADNOC's launch description.
⚛La chimica
Crude oil is a continuous mixture of hydrocarbons: alkanes (paraffins), cycloalkanes (naphthenes) and aromatics such as benzene, plus heavy resins and asphaltenes. Sulphur sits mainly in thiols, sulphides and thiophenes and in dissolved hydrogen sulphide; the more of it a crude carries, the more hydrotreating a refinery needs to meet fuel sulphur limits. Lighter crudes contain a higher share of short, saturated chains that boil at low temperatures.
⚙How it is made
Produced from the Umm Lulu and Sarb fields by ADNOC Offshore, then processed, stored and exported at Zirku Island.
▶How it works
API gravity is 141.5 divided by relative density at 60 F, minus 131.5, so a higher figure means a lighter crude. In a refinery the crude is first split in an atmospheric distillation unit and the cuts are upgraded in hydrotreaters, reformers and crackers. Pricing terms are not published in the sources checked.
▣Storage, loading and inspection
Crude moves by pipeline to a terminal, is stored in floating-roof tanks and is loaded by loading arms or single point moorings onto tankers under inert gas. Independent inspectors sample under ASTM D4057 or API MPMS Chapter 8, measure water and sediment and quantity, and issue a quality and quantity certificate at loading.
★Why it matters in the Gulf
Initial output at launch was reported as 50,000 barrels per day; that is a launch-time figure, not a current one.
Molecole chiave
Norme e specifiche
| ASTM D4052 / ISO 12185 | Density by digital density meter, used to derive API gravity for cargo documents. |
|---|---|
| ASTM D4294 / ISO 8754 | Sulphur content by X-ray fluorescence. |
| ASTM D4057 / API MPMS Ch. 8.1 | Manual sampling of petroleum liquids for cargo quality determination. |
| ASTM D5853 | Pour point of crude oils; relevant to waxy grades. |
| Producer sales specification | A grade is sold against the producer's own assay and quality specification, not one public standard. |
Pericoli
UN 1267 is the shipping name 'Petroleum crude oil'. Vapours are heavier than air and may carry hydrogen sulphide and benzene; static ignition is a risk during loading, so tanks and decks need gas monitoring and inerting.
Come si commercializza
Units
Barrels (bbl); cargo sizes in thousand barrels; US dollars per barrel
Benchmarks
Not published in the sources checked
Typical cargo
VLCC about 2 million barrels, Suezmax about 1 million barrels, Aframax about 600,000 barrels (depends on terminal draft)
Incoterms
FOB at the loading terminal is common; CFR or CIF for delivered sales
Notes
Terms are not published in the sources checked.
Lo sapeva?
💡 Zirku Island is a UAE island in the Gulf about 140 km northwest of Abu Dhabi city.
Si metta alla prova su Umm Lulu
About what sulphur content was reported for Umm Lulu at launch?
Altro in questo gruppo
- Arab Extra Light
- Arab Light
- Arab Medium
- Arab Heavy
- Murban
- Upper Zakum
- Das Blend
- Basrah Medium
- Basrah Heavy
- Kuwait Export Blend
- Qatar Marine
- Oman Blend
Fonti
Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: low. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.



