Ir para o conteúdo

← Todos os processos

Amine gas treating

Refinery process

Amine treating washes refinery gas and LPG with a water solution of an amine to absorb hydrogen sulphide and carbon dioxide. The captured H2S goes to sulphur recovery.

Carga de alimentação
Sour refinery gas or LPG containing H2S and CO2
Produz
Sweet gas, Acid gas rich in H2S (to Claus unit), Regenerated lean amine (recycled)
Temperatura
Absorption about 35 to 50 (source range)
Catalisador
Aqueous amine solvent (MEA about 20 wt%, DEA about 25 to 35 wt%, MDEA about 30 to 55 wt%)

Fluxo do processo

O que faz

Hydrotreaters, crackers and cokers all produce gas with hydrogen sulphide, which is toxic and must not be burned in fuel gas at high levels. Sour gas flows up an absorber column against a downward stream of lean amine solution. The amine reacts reversibly with the acid gases and leaves the bottom as rich amine. The rich amine is heated in a stripper with a reboiler, which releases a concentrated acid gas stream and regenerates lean amine for reuse. The sweetened gas leaves the top of the absorber. Common amines include MEA, DEA and MDEA, and MDEA can be selective for H2S over carbon dioxide.

Passo a passo

  1. Sour gas enters the bottom of the absorber
  2. Lean amine is sprayed down from the top
  3. Amine absorbs H2S and CO2
  4. Sweet gas leaves the top
  5. Rich amine is heated in a regenerator
  6. Acid gas leaves the stripper overhead for sulphur recovery
  7. Lean amine is cooled and recycled

A química

An amine is a weak base. It accepts a proton from dissolved H2S to form an ammonium and hydrosulphide ion pair, a reversible acid-base reaction that runs backward when the solution is heated.

Reações, desenhadas átomo por átomo

MEA absorbing H2SNCCOS[NH3+]CCO[SH-]RNH2 + H2S <-> RNH3+ + HS-R is HOCH2CH2; heating reverses the reaction.

Equipamentos principais

  • Absorber contactor
  • Regenerator with reboiler
  • Lean-rich exchanger
  • Amine filters
  • Amine surge tank

Segurança

H2S is highly toxic even at low concentrations, and amine solutions foul and corrode if contaminated.

Teste seus conhecimentos

Pergunta 1 de 3 · Pontuação 0 · Sequência 0

Which amine is typically used at about 20 percent by weight?

Relacionados

Fontes

Redigido com as palavras da própria PST a partir das fontes acima. Confiabilidade dos dados: high. As plantas reais diferem em projeto e condições de operação.