Catalytic reforming
Refinery process
Catalytic reforming turns low-octane heavy naphtha into high-octane reformate over a platinum catalyst. It also produces a large share of the hydrogen a refinery uses elsewhere.
- Carga de alimentação
- Hydrotreated heavy naphtha (about 140 to 205 C cut)
- Produz
- Reformate, Hydrogen, LPG and light gases
- Temperatura
- About 495 to 525
- Pressão
- About 5 to 45
- Catalisador
- Platinum, often with rhenium, on chlorided alumina
Fluxo do processo
O que faz
Heavy straight-run naphtha, boiling roughly between 140 and 205 degrees Celsius, has a poor octane rating and cannot go straight into gasoline. After hydrotreating to protect the catalyst, the naphtha is mixed with recycled hydrogen and passed through a series of reactors with furnaces between them, because the main reactions absorb heat. Naphthenes lose hydrogen and become aromatics, straight-chain paraffins cyclise and branch, and a small amount of cracking occurs. The liquid product, reformate, is rich in aromatics such as toluene and xylenes and is a major gasoline blending component or source of petrochemical aromatics. Net hydrogen is a valuable by-product.
Passo a passo
- Naphtha is hydrotreated to remove sulphur and nitrogen
- Feed is mixed with recycle hydrogen and heated
- Gas enters the first reactor where dehydrogenation cools the stream
- The stream is reheated between three or four reactors
- Effluent is cooled and hydrogen-rich gas is separated
- Some hydrogen is recycled and the net hydrogen leaves to the refinery
- The liquid is stabilised, removing light ends, to give reformate
A química
The key reaction is dehydrogenation of naphthenes to aromatics, for example methylcyclohexane to toluene, which is strongly endothermic and releases hydrogen. Paraffins also dehydrocyclise to aromatics and isomerise to branched forms, both of which raise octane. Hydrocracking breaks some paraffins into LPG, consuming hydrogen. The metal function of platinum drives dehydrogenation and the acid function of the alumina drives ring closure and isomerisation.
Reações, desenhadas átomo por átomo
Equipamentos principais
- Charge and interstage heaters
- Three or four radial-flow reactors
- Product separator
- Recycle compressor
- Stabiliser column
Segurança
Hydrogen-rich gas at temperature is flammable; benzene in reformate is a toxic hazard. Catalyst chlorides can form acidic corrosion.
Teste seus conhecimentos
What is the principal by-product of reforming?
Relacionados
- Hydrotreating and hydrodesulphurisationRefinery process
- IsomerisationRefinery process
- Hydrogen production (steam methane reforming)Refinery process
- Product blending and additivesRefinery process
Fontes
Redigido com as palavras da própria PST a partir das fontes acima. Confiabilidade dos dados: high. As plantas reais diferem em projeto e condições de operação.