Ir para o conteúdo

Solvents and chemicals

White Spirit

White spirit is a petroleum solvent of C7 to C12 hydrocarbons used as paint thinner and degreaser. It comes in low flash, regular and high flash grades.

← Todos os produtosTambém chamado de: Mineral spirits, Stoddard solvent, Paint thinner, Naphtha solvent (type 0/1/2/3), Odourless mineral spirits

  • Ponto de fulgor21 to 30 C (low flash); 31 to 54 C (regular); above 55 C (high flash)
  • Densidade765 to 795 kg/m³
  • ViscosidadeAbout 1 mm2/s at 20 C
  • Fluidez a frioBelow -40 C
  • EnxofreBelow 0.005 to 0.05% typical
  • Faixa de ebulição130 to 200 °C
Cor típica, vidro de laboratório
Amostra de White Spirit em vidro de laboratório, na cor típica
Uma amostra de White Spirit em vidro de laboratório sobre fundo escuro de estúdio, para facilitar a avaliação da cor.
Fotografia de referência
Como White Spirit é armazenado e movimentado na prática.

Créditos das imagens As amostras em vidro de laboratório foram feitas a partir de fotografias de referência da Wikimedia Commons por Chemik10 (CC BY-SA 2.5) e uma foto de amostra de petróleo em CC0.

Agite o líquido para sentir a sua espessura

Passe o rato ou um dedo sobre o líquido. Prima e arraste para agitar com mais força. Teclado: as setas agitam, a barra de espaço sacode.

Fino
A cor segue a cor típica de White Spirit.
Fino e soltoEspesso e pesado

Fino Leve e fluido. As ondas deslocam-se depressa e desvanecem-se devagar.

Viscosidade típica segundo os dadosAbout 1 mm2/s at 20 C

Velocidade de agitação
0 px/s
Movimento do líquido
0%
Assentou após
-
Superfície
Parado

A classe é apenas uma referência de sensação. O valor de viscosidade apresentado é o dos dados da especificação.

Aspecto esperado

Water-white and thin, with a mild hydrocarbon smell. Colour is measured on the Saybolt scale, and any haze, yellow tint or strong odour counts against it.

Onde é usado

  • Paint thinner
  • Degreasing and cleaning
  • Dry cleaning
  • Printing inks
  • Aerosols

Manuseamento e segurança

  • Store in closed, grounded steel or lined tanks with nitrogen blanketing or vapour recovery; no ignition sources; use flameproof equipment and earthing during loading to limit static. Sample under closed conditions (ASTM D4057 or D5842), test purity, colour, water and distillation. Inspectors check tank cleanliness and prior cargo history before loading.
  • Vapour harmful; chronic exposure can affect the nervous system. Flammable.

Propriedades típicas

Aparência
Colourless clear liquid
Densidade a 15 °C
765 to 795 kg/m³
Faixa de ebulição
130 to 200 °C
Ponto de fulgor
21 to 30 C (low flash); 31 to 54 C (regular); above 55 C (high flash)
Viscosidade
About 1 mm2/s at 20 C
Ponto de fluidez
Below -40 C
Enxofre típico
Below 0.005 to 0.05% typical

◉What it is

White spirit is a clear, volatile hydrocarbon mixture of aliphatic and alicyclic compounds with 7 to 12 carbon atoms. It is a distillation cut between naphtha and kerosene. Grades differ in flash point: low flash 21 to 30 C, regular 31 to 54 C and high flash above 55 C. Types 1 to 3 describe how it is treated: hydrodesulphurised, solvent extracted or hydrogenated. Dearomatised grades are used where odour and toxicity matter. Stoddard solvent is a related grade developed in 1924 as a safer dry-cleaning solvent.

⬡What it is made of

C7 to C12 paraffins, naphthenes and 0 to 20% aromatics (dearomatised below 1%).

⚛A química

The molecules are non-polar, so white spirit dissolves oils, resins and alkyd paints but not water. Removing aromatics reduces odour and toxicity.

⚙How it is made

A straight-run kerosene or naphtha cut is hydrotreated to remove sulphur and aromatics, then fractionated to the required boiling range.

▶How it works

It dissolves binders and evaporates at a controlled rate set by its boiling range. Higher boiling grades evaporate more slowly.

▣Storage, loading and inspection

Store in closed, grounded steel or lined tanks with nitrogen blanketing or vapour recovery; no ignition sources; use flameproof equipment and earthing during loading to limit static. Sample under closed conditions (ASTM D4057 or D5842), test purity, colour, water and distillation. Inspectors check tank cleanliness and prior cargo history before loading.

★Why it matters in the Gulf

Solvent trade through Jebel Ali to Africa and South Asia is common, but Gulf production sources are not stated.

Moléculas principais

Normas e especificações

BS 245 and DIN 51632UK and German white spirit standards.
ASTM D235US specification for mineral spirits (petroleum spirits).

Riscos

UN1268 (petroleum distillates, n.o.s.) or UN1300 (turpentine substitute)Classe Class 3 flammable liquid, packing group III (low flash grades may be packing group II)

Vapour harmful; chronic exposure can affect the nervous system. Flammable.

Como é negociado

Units

Metric tonnes; drums; IBCs

Benchmarks

Contract; reference to naphtha and kerosene

Typical cargo

Parcels of 1,000 to 10,000 mt; ISO tanks; drums

Incoterms

FOB, CFR, CIF; DAP for packaged or road deliveries

Notes

Price follows naphtha with premium for dearomatised grades.

Refinarias que o produzem: nossas sugestões

7 refinarias listadas produzem este produto, 3 delas no Golfo, no Irã e no Iraque. Ordenamos primeiro as unidades do Golfo, depois as em operação e, por fim, por capacidade.

Ver todos os 7 no mapa

Você sabia

💡 The name covers several grades, from low flash (21 to 30 C) to high flash (above 55 C).

💡 Stoddard solvent was developed in 1924 as a less flammable dry-cleaning fluid (Wikipedia).

Teste seus conhecimentos sobre White Spirit

Pergunta 1 de 3 · Pontuação 0 · Sequência 0

Carbon range?

Ver a página de especificação da PST

Mais neste grupo

Fontes

Redigido com as palavras da própria PST a partir das fontes acima. Confiabilidade dos dados: medium. Os valores típicos variam conforme a origem e o contrato, por isso leia sempre a especificação do seu próprio contrato.