Перейти к содержимому

← Все процессы

Visbreaking

Refinery process

Visbreaking is a mild thermal cracking process that lowers the viscosity of vacuum residue. It lets refiners blend fuel oil with less expensive diluent or make extra middle distillate.

Сырьё
Vacuum residue (sometimes atmospheric residue)
Производит
Visbroken tar (fuel oil component), Gas oil, Naphtha, Gas and LPG
Температура
About 425 for mild cracking, up to about 500 for very severe
Катализатор
None (thermal process)

Технологическая схема

Что делает

Vacuum residue is thick and would need large amounts of lighter oil to make marketable fuel oil. A visbreaker heats the residue in a furnace to a controlled severity so a modest amount of cracking occurs. The product is thinner, with the same sulphur content but lower viscosity, and some gas, naphtha and gas oil are formed. Two designs exist: coil units crack in the furnace tubes, while soaker units hold the oil in a drum after the furnace at a lower temperature. Severity is limited because over-cracking makes the fuel oil unstable and causes sediment.

Шаг за шагом

  1. Residue is preheated
  2. A furnace heats it to the chosen severity
  3. Coil design cracks in the tubes; soaker design holds the oil in a drum
  4. The effluent is quenched to stop reactions
  5. Fractionation separates gas, naphtha and gas oil
  6. Tar from the bottom may be vacuum flashed
  7. Reduced-viscosity residue goes to fuel oil

Химия

Heat breaks the long alkyl side chains and bridges of residue molecules by free-radical cracking, giving smaller molecules that act as a thinner carrier for the heavy asphaltenes. Too much conversion makes asphaltenes drop out as sediment.

Реакции с отображением каждого атома

Thermal cracking of a paraffin chainCCCCCCCCCCCCCCCCCCC=CCCCCC12H26 -> C6H14 + C6H12Chain scission to smaller alkane and alkene.

Типичные выходы

  • 76% Tar
  • 15% Middle distillates
  • 6% Gasoline
  • 3% Gas and LPG

Основное оборудование

  • Visbreaker furnace
  • Soaker drum
  • Fractionator
  • Vacuum flasher (optional)

Безопасность

Furnace tube coking can lead to hot spots and tube failure; hot tar is a fire and burn hazard.

Проверьте себя

Вопрос 1 из 3 · Счёт 0 · Серия 0

What does visbreaking mainly reduce?

Связанное

Источники

Написано собственными словами PST по источникам выше. Достоверность данных: high. Реальные заводы различаются по конструкции и условиям работы.