Solvents and chemicals
Para-Xylene (PX)
Para-xylene is the xylene isomer used to make purified terephthalic acid (PTA) and then PET plastic and polyester.
← Все продуктыДругие названия: PX, p-Xylene, 1,4-dimethylbenzene, Paraxylene
- Температура вспышкиAbout 25 C
- Плотность860 to 865 kg/m³
- ВязкостьAbout 0.65 mPa.s at 20 C
- Низкотемпературная текучестьFreezing point 13 C
- СераBelow 1 ppm
- Интервал кипения138 to 139 °C

Авторство изображений Образцы в лабораторной посуде созданы по эталонным фотографиям с Wikimedia Commons, автор: Chemik10 (CC BY-SA 2.5) и фото образца нефти с лицензией CC0.
Помешайте жидкость, чтобы почувствовать её густоту
Проведите мышью или пальцем по жидкости. Нажмите и тяните, чтобы помешать сильнее. Клавиатура: стрелки перемешивают, пробел встряхивает.
Очень жидкая Жидкость тонкая, как вода, или ещё тоньше. Волны бегут быстро и долго не затухают.
Типичная вязкость по даннымAbout 0.65 mPa.s at 20 C
- Скорость перемешивания
- 0 px/с
- Движение жидкости
- 0%
- Успокоилась через
- -
- Поверхность
- Покой
Класс служит ориентиром для ощущения. Показанное значение вязкости взято из данных спецификации.
Внешний вид
Clear, colourless
Где применяется
- PTA and PET
- Polyester fibre
- Packaging bottles
Обращение и безопасность
- Store in closed, grounded steel or lined tanks with nitrogen blanketing or vapour recovery; no ignition sources; use flameproof equipment and earthing during loading to limit static. Sample under closed conditions (ASTM D4057 or D5842), test purity, colour, water and distillation. Inspectors check tank cleanliness and prior cargo history before loading. PX can freeze at 13 C so heated lines may be required in winter.
- Freezes at 13 C so tanks may need heating.
Типичные свойства
- Внешний вид
- Clear, colourless
- Плотность при 15 °C
- 860 to 865 kg/m³
- Интервал кипения
- 138 to 139 °C
- Температура вспышки
- About 25 C
- Вязкость
- About 0.65 mPa.s at 20 C
- Температура застывания
- Freezing point 13 C
- Типичное содержание серы
- Below 1 ppm
◉What it is
Para-xylene is a C8H10 aromatic with two methyl groups on opposite sides of the benzene ring. About 98 percent of production goes to terephthalic acid and dimethyl terephthalate, which are used to make PET bottles and polyester fibre (Wikipedia). It is made in aromatic complexes by isomerising and separating mixed xylenes using crystallisation or adsorption (Parex, Eluxyl). Purity of 99.7 percent or more is required.
⬡What it is made of
p-Xylene 99.7% min.
⚛Химия
The symmetrical structure gives a high melting point of 13 C and allows chain linkage in polymer. Terephthalic acid is made by oxidation of the two methyl groups to carboxylic acid.
⚙How it is made
Mixed xylenes pass through an isomerisation unit and a selective adsorption or crystallisation unit to isolate PX.
▶How it works
PX is oxidised to PTA, which reacts with ethylene glycol to make PET.
▣Storage, loading and inspection
Store in closed, grounded steel or lined tanks with nitrogen blanketing or vapour recovery; no ignition sources; use flameproof equipment and earthing during loading to limit static. Sample under closed conditions (ASTM D4057 or D5842), test purity, colour, water and distillation. Inspectors check tank cleanliness and prior cargo history before loading. PX can freeze at 13 C so heated lines may be required in winter.
★Why it matters in the Gulf
Gulf Arab states have aromatics and paraxylene capacity or projects. Producer details and export volumes are not stated.
Ключевые молекулы
Стандарты и спецификации
| Contract specification | PX is sold on purity, typically 99.7% or higher; confirm the test methods with the supplier. |
|---|
Опасности
Freezes at 13 C so tanks may need heating.
Как им торгуют
Units
Metric tonnes
Benchmarks
Platts PX CFR China/Taiwan, FOB Korea
Typical cargo
Parcel tankers 5,000 to 30,000 mt
Incoterms
FOB, CFR, CIF; DAP for packaged or road deliveries
Notes
China is the largest buyer.
НПЗ, которые его производят: наши рекомендации
НПЗ в списке, производящих этот продукт: 20, из них в странах Персидского залива, Иране и Ираке: 7. Сначала идут заводы Персидского залива, затем действующие, затем по мощности.
- 1Ras Tanura Refinery
Saudi Arabia · 550,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionДоступ к экспорту
- 2SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionДоступ к экспорту
- 3Petro Rabigh Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingДоступ к экспорту
- 4SASREF (Saudi Aramco Shell Refinery) Jubail
Saudi Arabia · 305,000 bpdGulf locationOperatingДоступ к экспорту
- 5Aromatics Oman Complex (Sohar)
Oman · Not publishedGulf locationOperatingДоступ к экспорту
- 6Jamnagar Refinery (Reliance)
India · 1,400,000 bpdOperatingDeep conversionДоступ к экспорту
Знаете ли вы
💡 p-Xylene melts at about 13 C, so it can freeze in a cool tank (Wikipedia).
💡 PET bottles and polyester fibre come from terephthalic acid made from PX.
Проверьте себя: Para-Xylene (PX)
PX makes?
Ещё в этой группе
- White Spirit
- Hexane (n-Hexane, Commercial Hexane)
- Benzene
- Toluene
- Mixed Xylene
- MTBE (Methyl Tert-Butyl Ether)
- Ethylene (Refinery and Petrochemical Stream)
- Propylene (Refinery and Petrochemical Stream)
Источники
Написано собственными словами PST по источникам выше. Достоверность данных: medium. Типичные значения зависят от происхождения и контракта, поэтому всегда читайте спецификацию в своём контракте.





