Bitumen production and blowing
Refinery process
Bitumen is the heavy residue from vacuum distillation, sometimes blown with air to make it harder. It is mainly used for road paving and roofing.
- 进料
- Vacuum residue from suitable crudes (or deasphalter pitch)
- 产品
- Paving grade bitumen, Oxidised (blown) bitumen for roofing and industrial use, Polymer-modified bitumen
- 温度
- Stored and shipped at about 150
- 催化剂
- None (air oxidation)
工艺流程
功能
Bitumen, also called asphalt, is the heaviest fraction of crude, with a boiling point above about 500 degrees Celsius. Vacuum distillation can produce straight-run bitumen directly from suitable crudes. To meet harder grades, the residue can be blown with air in a blowing column: oxygen reacts with the heavy molecules, which makes the product harder and more viscous. Solvent deasphalting provides another source. The finished bitumen is stored and shipped hot, around 150 degrees Celsius, and may be modified with polymers or recycled rubber to improve performance.
分步说明
- Selected vacuum residue is taken from the vacuum tower
- Residue may be heated and fed to an air blowing vessel
- Air is bubbled through the hot residue
- Oxidation and condensation raise hardness and softening point
- Off-gas is treated or incinerated
- The product is cooled and tested for penetration and softening point
- Bitumen is stored hot, modified if needed, and loaded
化学成分
Air blowing links large molecules and forms more asphaltenes at the expense of oils, so the product becomes stiffer. The details depend on the crude and are not shown as a single balanced equation.
主要设备
- Blowing column
- Heater
- Hot oil heating system
- Heated storage tanks
- Loading arms
安全
Hot bitumen causes severe burns, and blowing off-gas contains hydrogen sulphide and hydrocarbons. Hot tanks can foam or boil over if water enters.
自我测验
Material boiling above about what temperature is considered asphalt?
相关
- Vacuum distillation (VDU)Refinery process
- Solvent deasphaltingRefinery process
- Product blending and additivesRefinery process
来源
由 PST 依据上述来源自行撰写。数据可信度:medium。实际装置的设计和运行条件各有不同。