EDC, VCM and PVC
Petrochemical process
Ethylene and chlorine make ethylene dichloride (EDC), which is cracked to vinyl chloride monomer (VCM) and polymerised to PVC.
- 进料
- Ethylene, chlorine (from chlor-alkali), oxygen
- 产品
- EDC, Vinyl chloride monomer (VCM), PVC resin, Caustic soda (from chlor-alkali)
- 温度
- EDC cracking in a fired furnace
- 催化剂
- Copper chloride (oxychlorination)
工艺流程
功能
Ethylene reacts with chlorine to give EDC. The EDC is heated in a fired cracker, where it splits into VCM and hydrogen chloride (HCl). Conversion per pass is only about 50 to 60 percent, so unconverted EDC is recycled, and the hot gas is quenched with cold EDC to limit side reactions. The HCl is recycled to an oxychlorination unit, which reacts it with ethylene and oxygen to make more EDC, so chlorine is used efficiently. VCM is then polymerised, mainly in suspension, to PVC resin.
分步说明
- Chlorine and caustic from brine electrolysis
- Direct chlorination of ethylene to EDC
- Oxychlorination of ethylene with HCl and oxygen
- Purify EDC by distillation
- Crack EDC to VCM and HCl
- Quench and separate HCl and VCM
- Polymerise VCM to PVC
- Dry and bag the resin
化学成分
Chlorine adds across the double bond of ethylene. Heating removes HCl to form the vinyl group, and vinyl chloride chains join to make poly(vinyl chloride).
逐个原子绘制的反应式
主要设备
- Chlorination reactor
- Oxychlorination reactor
- EDC cracking furnace
- Quench column
- Polymerisation autoclave
- Dryer
安全
Vinyl chloride is a flammable gas and an IARC Group 1 carcinogen, so closed systems and strict exposure limits apply.
在海湾地区
Gulf chlor-vinyl capacity is smaller than its polyolefin capacity. Gulf ethylene and local chlor-alkali supply the few EDC and PVC chains in the region. Plant capacities are not stated for this entry.
自我测验
What is the typical per-pass conversion in EDC cracking?
相关
- Steam crackingPetrochemical process
- Ethylene to polyethylene (HDPE, LDPE, LLDPE)Petrochemical process
来源
由 PST 依据上述来源自行撰写。数据可信度:medium。实际装置的设计和运行条件各有不同。