Ethylene oxide and mono-ethylene glycol (MEG)
Petrochemical process
Ethylene is oxidised over a silver catalyst to ethylene oxide, which is then hydrated to mono-ethylene glycol, the main raw material for polyester and antifreeze.
- 进料
- Ethylene, oxygen, water
- 产品
- Ethylene oxide, Mono-ethylene glycol (MEG), Diethylene glycol, Triethylene glycol
- 温度
- About 220 to 280 (oxidation); about 200 (hydration)
- 压力
- About 10 to 30 (oxidation); about 15 to 20 (hydration)
- 催化剂
- Silver on alumina (oxidation); none for thermal hydration
工艺流程
功能
Ethylene and oxygen (or air) are passed over a silver catalyst supported on alumina. The reaction is carried out at about 220 to 280 C and 1 to 3 MPa, and cooling is critical because complete oxidation to CO2 is a competing reaction. Ethylene oxide is scrubbed from the reactor gas with water and stripped out. Reacting it with excess water at about 200 C and 1.5 to 2 MPa gives glycols without a catalyst, with MEG as the main product and diethylene and triethylene glycol as co-products. Newer licensed routes raise the MEG selectivity to over 90 percent.
分步说明
- Purify ethylene and oxygen feeds
- Oxidise ethylene over silver catalyst
- Scrub ethylene oxide with water
- Strip and purify ethylene oxide
- Hydrate with excess water to glycols
- Evaporate water
- Vacuum distil MEG, DEG and TEG
化学成分
Ethylene's double bond is oxidised to the three-membered epoxide ring. Water opens the ring to give the diol, and further reaction with ethylene oxide forms diethylene glycol and higher glycols.
逐个原子绘制的反应式
主要设备
- Multitubular reactor
- Water absorber
- Stripper
- Glycol reactor
- Evaporators
- Vacuum columns
安全
Ethylene oxide is extremely flammable, with an explosive range of about 3 to 100 percent in air, and it is a carcinogen, so it is handled as a cooled liquid and under nitrogen.
在海湾地区
MEG is a major Gulf export, made from ethylene at plants such as Sadara in Jubail and EQUATE in Kuwait, and shipped largely to Asian polyester makers. Detailed capacities are given in the hub entries only where verified.
自我测验
Which catalyst is used to oxidise ethylene to ethylene oxide?
相关
- Steam crackingPetrochemical process
- PTA and PET chainPetrochemical process
- Ethylene to polyethylene (HDPE, LDPE, LLDPE)Petrochemical process
来源
由 PST 依据上述来源自行撰写。数据可信度:high。实际装置的设计和运行条件各有不同。