Hydrogen production (steam methane reforming)
Refinery process
A steam methane reformer converts natural gas and steam into hydrogen over a nickel catalyst. Refineries use it to supply hydrotreaters and hydrocrackers.
- 进料
- Natural gas or light hydrocarbons, steam
- 产品
- Hydrogen, Carbon dioxide, Export steam, PSA off-gas (fuel)
- 温度
- Outlet about 815 to 925
- 压力
- About 14 to 40
- 催化剂
- Nickel on alumina
工艺流程
功能
Natural gas is first desulphurised to protect the catalyst, then mixed with steam and sent through furnace tubes filled with nickel catalyst. The reaction is strongly endothermic, so the tubes are heated in a fired box. The gas leaves as synthesis gas containing hydrogen and carbon monoxide. A shift reactor then converts most of the carbon monoxide with steam to extra hydrogen and carbon dioxide. A pressure swing adsorption unit purifies the hydrogen, and the purge gas is burned as furnace fuel. Plants usually include a pre-reformer and waste heat recovery to raise steam.
分步说明
- Natural gas is desulphurised
- Steam is added at a steam-to-carbon ratio of about 2.5 to 3
- A pre-reformer converts heavier hydrocarbons to methane
- Reformer tubes in a fired furnace convert methane to syngas
- Waste heat boilers raise steam
- Shift reactors convert CO to more hydrogen
- PSA purifies the hydrogen
化学成分
Methane reacts with steam over nickel to make carbon monoxide and hydrogen, absorbing about 206 kJ per mole. The water-gas shift reaction then converts carbon monoxide and water into carbon dioxide and more hydrogen. Sulphur poisons nickel, so it is removed first.
逐个原子绘制的反应式
主要设备
- Desulphuriser
- Pre-reformer
- Reformer furnace with catalyst tubes
- Shift converters
- PSA unit
- Waste heat boiler
安全
Hydrogen is flammable across a wide range and carbon monoxide is toxic. Tube overheating can cause rupture.
自我测验
Typical SMR catalyst?
相关
- Hydrotreating and hydrodesulphurisationRefinery process
- HydrocrackingRefinery process
- Catalytic reformingRefinery process
来源
由 PST 依据上述来源自行撰写。数据可信度:high。实际装置的设计和运行条件各有不同。