انتقل إلى المحتوى
تسجيل الدخولاطلب عرضاً

Bitumen and solids

Bitumen 40/50, 60/70 and 80/100 (Paving Grades)

Paving grade bitumen is a black, sticky binder graded by how deep a standard needle sinks into it. In the EN 12591 range the grades run from 35/50 (hardest) to 160/220 (softest), and other standards also use grades such as 60/70 and 80/100.

← كل المنتجاتيُسمى أيضاً: Penetration grade bitumen, Asphalt cement, Bitumen 60/70, Bitumen 80/100, Bitumen 40/50, Asphalt binder

  • نقطة الوميضAbove about 230 C (Cleveland open cup) for most grades
  • الكثافة1000 to 1060 kg/m³
  • اللزوجةGraded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade
  • الكبريت1 to 6% depending on crude
  • الخطرUN3257 for hot bitumen shipped as an elevated temperature liquid, Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)
اللون المعتاد، زجاج مختبري
عينة مخبرية زجاجية من Bitumen 40/50, 60/70 and 80/100 (Paving Grades) بلونها المعتاد
عينة من Bitumen 40/50, 60/70 and 80/100 (Paving Grades) في زجاج مختبري على خلفية استوديو داكنة، ليسهل الحكم على اللون.
صورة مرجعية
كيف يُخزَّن Bitumen 40/50, 60/70 and 80/100 (Paving Grades) وينقل عمليا.

حقوق الصور عينات الزجاج المختبري مصنوعة من صور مرجعية على ويكيميديا كومنز بواسطة Chemik10 (CC BY-SA 2.5) وصورة عينة بترولية بترخيص CC0.

حرّك السائل لتحس بمدى لزوجته

حرّك الفأرة أو إصبعك فوق السائل. اضغط واسحب للتحريك بقوة أكبر. لوحة المفاتيح: الأسهم للتحريك، المسافة للرج.

شبه صلب
اللون يتبع اللون المعتاد لـ Bitumen 40/50, 60/70 and 80/100 (Paving Grades).
رقيق وسائبلزج وثقيل

شبه صلب شبه صلب في درجة الحرارة العادية. يزحف ببطء ويجب تسخينه ليُضخ.

اللزوجة المعتادة من البياناتGraded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade

سرعة التحريك
0 بكسل/ث
حركة السائل
0%
يستقر بعد
-
السطح
ساكن

الفئة دليل تقريبي للإحساس. رقم اللزوجة المعروض هو الوارد في بيانات المواصفات.

مظهره

Black, glossy at hot, brittle when cold

أين يُستخدم

  • Road paving
  • Airport runways
  • Roofing and waterproofing
  • Hot-mix asphalt in ports and car parks

المناولة والسلامة

  • Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing.
  • Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

الخصائص المعتادة

المظهر
Black, glossy at hot, brittle when cold
الكثافة عند 15 °C
1000 to 1060 kg/m³
نقطة الوميض
Above about 230 C (Cleveland open cup) for most grades
اللزوجة
Graded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade
نقطة الانسكاب
Not applicable
الكبريت المعتاد
1 to 6% depending on crude

◉What it is

Bitumen is the heavy residue of crude distillation. Wikipedia describes it as the heavy fraction boiling above about 500 C after vacuum distillation. Paving grades are defined by penetration at 25 C in tenths of a millimetre: 40/50 means 40 to 50 units. Hard grades such as 40/50 resist rutting in hot climates and heavy traffic, while softer grades like 80/100 resist cracking in cold climates. It is stored and moved at about 150 C.

⬡What it is made of

C40+ asphaltenes, resins, saturates and aromatics; sulphur 1 to 6%.

⚛الكيمياء

Bitumen is a colloidal system: asphaltene clusters dispersed in an oily maltene phase of resins, aromatics and saturates. The ratio decides stiffness. More asphaltenes make a harder bitumen.

⚙How it is made

Vacuum distillation residue from suitable crude oils (such as heavy Middle East crudes) is the base. Air blowing or blending of hard and soft components adjusts penetration.

▶How it works

Penetration (ASTM D5, EN 1426), softening point (ASTM D36, EN 1427) and viscosity are used to measure stiffness. It binds aggregate in asphalt concrete, becoming fluid at 150 C and solid at ambient temperature.

▣Storage, loading and inspection

Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing.

★Why it matters in the Gulf

The GCC consumes large volumes of bitumen in road and airport projects, and Gulf and Iranian bitumen is traded to Central Asia and East Africa. Refinery-by-refinery supply and export volumes are not stated.

الجزيئات الرئيسية

المعايير والمواصفات

EN 12591European specification for paving grade bitumens (penetration grades).
ASTM D946US penetration-graded asphalt cement.
ASTM D3381Viscosity-graded asphalt cement.
AASHTO M 320Performance-graded asphalt binder.

المخاطر

UN3257 for hot bitumen shipped as an elevated temperature liquidالفئة Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)

Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

كيف يُتداول

Units

Metric tonnes

Benchmarks

Contract-based; price tracks crude oil and fuel oil; no futures

Typical cargo

Bulk bitumen vessels 3,000 to 20,000 mt; ISO tanks; drums

Incoterms

FOB, CFR, CIF bulk; ISO tank FCA

Notes

Penetration grades such as 60/70 are common export trade grades. Origin and volume data are not stated.

المصافي التي تنتجه: ترشيحاتنا

54 من المصافي المدرجة تنتج هذا المنتج، منها 17 في الخليج وإيران والعراق. نرتّب مصانع الخليج أولاً، ثم المصانع العاملة، ثم بحسب الطاقة.

شاهد كل 54 على الخريطة

المحطات التي تتعامل معه

هل تعلم

💡 In American usage asphalt means bitumen, and asphalt concrete is the paving mix with stone (Wikipedia).

💡 Natural bitumen from the Dead Sea was used by the Egyptians for embalming (Wikipedia).

اختبر نفسك في Bitumen 40/50, 60/70 and 80/100 (Paving Grades)

السؤال 1 من 3 · النتيجة 0 · السلسلة 0

What does 60/70 mean?

المزيد في هذه المجموعة

المصادر

كُتب بأسلوب PST من المصادر أعلاه. الثقة في البيانات: medium. تختلف القيم المعتادة بحسب المنشأ والعقد، فاقرأ دائماً المواصفات الواردة في عقدك.