انتقل إلى المحتوى
تسجيل الدخولاطلب عرضاً

Bitumen and solids

Polymer Modified Bitumen (PMB)

PMB is bitumen blended with polymers such as SBS to improve elasticity and temperature performance. It is used on heavy traffic roads and in roofing membranes.

← كل المنتجاتيُسمى أيضاً: PMB, SBS modified bitumen, PG 76-22, Modified binder

  • نقطة الوميضTypically above 220 C (varies by grade)
  • الكثافة1000 to 1040 kg/m³
  • اللزوجةSoftening point at least 65 C for the PMB 45/80-65 grade
  • الكبريت1 to 6%
  • الخطرUN3257 for hot bitumen shipped as an elevated temperature liquid, Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)
اللون المعتاد، زجاج مختبري
عينة مخبرية زجاجية من Polymer Modified Bitumen (PMB) بلونها المعتاد
عينة من Polymer Modified Bitumen (PMB) في زجاج مختبري على خلفية استوديو داكنة، ليسهل الحكم على اللون.
صورة مرجعية
كيف يُخزَّن Polymer Modified Bitumen (PMB) وينقل عمليا.

حقوق الصور عينات الزجاج المختبري مصنوعة من صور مرجعية على ويكيميديا كومنز بواسطة Chemik10 (CC BY-SA 2.5) وصورة عينة بترولية بترخيص CC0.

Polymer Modified Bitumen (PMB) مادة صلبة في درجة الحرارة العادية، فلا يوجد سائل لتحريكه. Softening point at least 65 C for the PMB 45/80-65 grade

مظهره

Black

أين يُستخدم

  • Heavy traffic roads
  • Airports
  • Bridge decks
  • Roofing membranes

المناولة والسلامة

  • Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing. PMB can separate if stored hot too long; keep stirred.
  • Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

الخصائص المعتادة

المظهر
Black
الكثافة عند 15 °C
1000 to 1040 kg/m³
نقطة الوميض
Typically above 220 C (varies by grade)
اللزوجة
Softening point at least 65 C for the PMB 45/80-65 grade
نقطة الانسكاب
Not applicable
الكبريت المعتاد
1 to 6%

◉What it is

Polymer modified bitumen is conventional bitumen that has been blended with polymers. The most common is SBS (styrene-butadiene-styrene), which adds elasticity and resistance to rutting and cracking. Others are plastomers such as EVA and recycled rubber (Wikipedia mentions tyre rubber). PMB is graded by softening point, elastic recovery and penetration. It costs more than plain bitumen but extends pavement life.

⬡What it is made of

Bitumen plus 2 to 7% polymer; sometimes cross-linking agent such as sulphur.

⚛الكيمياء

SBS has hard polystyrene end blocks and soft polybutadiene mid blocks. In bitumen the blocks form a network that gives rubber-like elasticity.

⚙How it is made

Base bitumen is mixed with polymer in high shear mills at 170 to 190 C, then held for swelling.

▶How it works

The polymer network lets the binder stretch and recover, so pavement resists rutting in summer and cracking in winter.

▣Storage, loading and inspection

Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing. PMB can separate if stored hot too long; keep stirred.

★Why it matters in the Gulf

PMB is relevant for Gulf highways and airports where summer pavement temperatures are very high. Regional plant details are not stated.

الجزيئات الرئيسية

المعايير والمواصفات

EN 14023European framework specification for polymer modified bitumens.
AASHTO M 320 and M 332Performance-graded binder specifications, M 332 using the multiple stress creep recovery test.
ASTM D6373Performance-graded asphalt binder.

المخاطر

UN3257 for hot bitumen shipped as an elevated temperature liquidالفئة Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)

Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

كيف يُتداول

Units

Metric tonnes

Benchmarks

Contract price; premium over 60/70

Typical cargo

Tank truck, ISO tank, drums

Incoterms

DAP, FCA, FOB

Notes

Priced at a premium over plain bitumen; the premium varies by market.

المصافي التي تنتجه: ترشيحاتنا

73 من المصافي المدرجة تنتج هذا المنتج، منها 22 في الخليج وإيران والعراق. نرتّب مصانع الخليج أولاً، ثم المصانع العاملة، ثم بحسب الطاقة.

شاهد كل 73 على الخريطة

المحطات التي تتعامل معه

هل تعلم

💡 SBS is the polymer most often used to modify bitumen.

💡 Polymer modification raises elasticity and resistance to rutting.

اختبر نفسك في Polymer Modified Bitumen (PMB)

السؤال 1 من 3 · النتيجة 0 · السلسلة 0

Common polymer in PMB?

المزيد في هذه المجموعة

المصادر

كُتب بأسلوب PST من المصادر أعلاه. الثقة في البيانات: medium. تختلف القيم المعتادة بحسب المنشأ والعقد، فاقرأ دائماً المواصفات الواردة في عقدك.