انتقل إلى المحتوى
تسجيل الدخولاطلب عرضاً

Middle distillates

Gasoil 50 ppm

Gasoil 50 ppm is a middle distillate with sulphur limited to 50 ppm (0.005% m/m). It is a common export diesel grade for markets whose vehicle standards do not yet require 10 ppm.

← كل المنتجاتيُسمى أيضاً: Diesel 50 ppm, Euro 4 diesel, Gasoil 0.005% S

  • نقطة الوميضAbove 55 C typical (min 52 to 60 C depending on contract)
  • الكثافة820 to 860 kg/m³
  • اللزوجة2.0 to 4.5 mm2/s at 40 C typical
  • الكبريتMax 50 ppm (0.005% m/m)
  • مدى الغليان170 to 375 °C
  • الخطرUN1202, Class 3 flammable liquid, packing group III (ADR/IMDG)
اللون المعتاد، زجاج مختبري
عينة مخبرية زجاجية من Gasoil 50 ppm بلونها المعتاد
عينة من Gasoil 50 ppm في زجاج مختبري على خلفية استوديو داكنة، ليسهل الحكم على اللون.
صورة مرجعية
كيف يُخزَّن Gasoil 50 ppm وينقل عمليا.

حقوق الصور عينات الزجاج المختبري مصنوعة من صور مرجعية على ويكيميديا كومنز بواسطة Chemik10 (CC BY-SA 2.5) وصورة عينة بترولية بترخيص CC0. صورة فوتوغرافية: مصنوعة من صورة مرجعية بواسطة DanTD, CC BY-SA 3.0, عبر Wikimedia Commons.

حرّك السائل لتحس بمدى لزوجته

حرّك الفأرة أو إصبعك فوق السائل. اضغط واسحب للتحريك بقوة أكبر. لوحة المفاتيح: الأسهم للتحريك، المسافة للرج.

رقيق
اللون يتبع اللون المعتاد لـ Gasoil 50 ppm.
رقيق وسائبلزج وثقيل

رقيق خفيف وسلس الانسياب. الموجات تنتقل بسرعة وتخمد ببطء.

اللزوجة المعتادة من البيانات2.0 to 4.5 mm2/s at 40 C typical

سرعة التحريك
0 بكسل/ث
حركة السائل
0%
يستقر بعد
-
السطح
ساكن

الفئة دليل تقريبي للإحساس. رقم اللزوجة المعروض هو الوارد في بيانات المواصفات.

مظهره

Clear to pale yellow, may be dyed by local rule

أين يُستخدم

  • Road diesel in markets that still allow this sulphur level
  • Power generation and industrial burners
  • Mining and construction equipment
  • Agricultural and fishing vessels

المناولة والسلامة

  • Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
  • Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.

الخصائص المعتادة

المظهر
Clear to pale yellow, may be dyed by local rule
الكثافة عند 15 °C
820 to 860 kg/m³
مدى الغليان
170 to 375 °C
نقطة الوميض
Above 55 C typical (min 52 to 60 C depending on contract)
اللزوجة
2.0 to 4.5 mm2/s at 40 C typical
نقطة الانسكاب
Varies by season
الكبريت المعتاد
Max 50 ppm (0.005% m/m)

◉What it is

Gasoil 50 ppm is a diesel-range fuel that has been hydrotreated to a moderate sulphur level. It is sold to countries and industries that use it for road transport, power generation and machinery. The sulphur level matches Euro 4 era vehicle rules, so engines with advanced exhaust filters should not use it. It has the same basic boiling range and cetane behaviour as 10 ppm diesel but a higher sulphur content. Contracts often state the exact sulphur limit, density, cetane index, flash point and distillation requirements. Intermediate grade between 500 ppm and 10 ppm.

⬡What it is made of

Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.

⚛الكيمياء

Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.

⚙How it is made

Atmospheric distillation provides straight-run gasoil which is hydrotreated at less severity than 10 ppm production. Blending with other treated cuts adjusts density and cold flow.

▶How it works

Sulphur burns to sulphur oxides, so higher sulphur means more SO2 and particulate emissions and faster wear on catalysts. Cetane and cold-flow behave like other diesel grades. Because sulphur is moderate, natural lubricity is generally adequate without extra additive.

▣Storage, loading and inspection

Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.

★Why it matters in the Gulf

Gulf refiners export 50 ppm gasoil to importers whose standards sit between 500 ppm and 10 ppm, with storage and blending at Fujairah. Volumes are not stated.

الجزيئات الرئيسية

المعايير والمواصفات

EN 590 (older editions)European road diesel was limited to 50 mg/kg sulphur from 2005, before the 10 mg/kg limit from 2009 (Wikipedia).
ASTM D975 S15 and S500US grades with 15 ppm and 500 ppm maximum sulphur; there is no US 50 ppm grade.
Contract or national specificationMany importing countries set their own limits.

المخاطر

UN1202الفئة Class 3 flammable liquid, packing group III (ADR/IMDG)

Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.

كيف يُتداول

Units

Metric tonnes, with barrels (about 7.5 bbl per tonne at typical density) and cubic metres used for pricing and storage.

Benchmarks

Platts FOB Arab Gulf gasoil assessments; sulphur grade quoted separately from the 10 ppm price

Typical cargo

Typically 30,000 mt MR parcels or 5,000 to 10,000 mt coastal cargoes

Incoterms

FOB (Arab Gulf load port), CFR or CIF (destination), DAP for inland deliveries; FCA for road or rail.

Notes

Pricing usually carries a differential to 10 ppm diesel because of the lower value of the higher-sulphur grade.

المصافي التي تنتجه: ترشيحاتنا

152 من المصافي المدرجة تنتج هذا المنتج، منها 42 في الخليج وإيران والعراق. نرتّب مصانع الخليج أولاً، ثم المصانع العاملة، ثم بحسب الطاقة.

شاهد كل 152 على الخريطة

المحطات التي تتعامل معه

هل تعلم

💡 50 ppm equals 0.005 percent by mass.

💡 The EU moved from 50 mg/kg to 10 mg/kg diesel sulphur from 2009 (Wikipedia).

اختبر نفسك في Gasoil 50 ppm

السؤال 1 من 3 · النتيجة 0 · السلسلة 0

What is the sulphur limit in Gasoil 50 ppm?

المزيد في هذه المجموعة

المصادر

كُتب بأسلوب PST من المصادر أعلاه. الثقة في البيانات: medium. تختلف القيم المعتادة بحسب المنشأ والعقد، فاقرأ دائماً المواصفات الواردة في عقدك.