انتقل إلى المحتوى
تسجيل الدخولاطلب عرضاً

Middle distillates

Marine Gasoil MGO (DMA)

MGO is a clear distillate marine fuel specified as DMA in ISO 8217. It is used in smaller engines, auxiliary engines and ships operating in emission control areas.

← كل المنتجاتيُسمى أيضاً: MGO, DMA, Marine gas oil, Marine diesel oil (loosely)

  • نقطة الوميضMin 60 C (ISO 8217)
  • الكثافة800 to 890 kg/m³
  • اللزوجة2.0 to 6.0 mm2/s at 40 C
  • الانسياب على الباردWinter max 0 C; summer max 6 C (ISO 8217)
  • الكبريتMax 1.0% historically; typically below 0.10% for LSMGO
  • مدى الغليان170 to 380 °C
اللون المعتاد، زجاج مختبري
عينة مخبرية زجاجية من Marine Gasoil MGO (DMA) بلونها المعتاد
عينة من Marine Gasoil MGO (DMA) في زجاج مختبري على خلفية استوديو داكنة، ليسهل الحكم على اللون.
صورة مرجعية
كيف يُخزَّن Marine Gasoil MGO (DMA) وينقل عمليا.

حقوق الصور عينات الزجاج المختبري مصنوعة من صور مرجعية على ويكيميديا كومنز بواسطة Chemik10 (CC BY-SA 2.5) وصورة عينة بترولية بترخيص CC0. صورة فوتوغرافية: مصنوعة من صورة مرجعية بواسطة Грищук ЮН, CC BY-SA 3.0, عبر Wikimedia Commons.

حرّك السائل لتحس بمدى لزوجته

حرّك الفأرة أو إصبعك فوق السائل. اضغط واسحب للتحريك بقوة أكبر. لوحة المفاتيح: الأسهم للتحريك، المسافة للرج.

رقيق
اللون يتبع اللون المعتاد لـ Marine Gasoil MGO (DMA).
رقيق وسائبلزج وثقيل

رقيق خفيف وسلس الانسياب. الموجات تنتقل بسرعة وتخمد ببطء.

اللزوجة المعتادة من البيانات2.0 to 6.0 mm2/s at 40 C

سرعة التحريك
0 بكسل/ث
حركة السائل
0%
يستقر بعد
-
السطح
ساكن

الفئة دليل تقريبي للإحساس. رقم اللزوجة المعروض هو الوارد في بيانات المواصفات.

مظهره

Clear and bright, pale yellow

أين يُستخدم

  • Auxiliary engines on all ships
  • Main engines of small vessels
  • Boilers and incinerators
  • ECA compliance fuel

المناولة والسلامة

  • Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
  • SOLAS requires a flash point of at least 60 C for ship fuel, with a narrow exception for emergency equipment.

الخصائص المعتادة

المظهر
Clear and bright, pale yellow
الكثافة عند 15 °C
800 to 890 kg/m³
مدى الغليان
170 to 380 °C
نقطة الوميض
Min 60 C (ISO 8217)
اللزوجة
2.0 to 6.0 mm2/s at 40 C
نقطة الانسكاب
Winter max 0 C; summer max 6 C (ISO 8217)
الكبريت المعتاد
Max 1.0% historically; typically below 0.10% for LSMGO

◉What it is

Marine gasoil is a distillate fuel supplied to ships under the ISO 8217 grade DMA. It has no residual oil, so it is cleaner and easier to handle than heavy fuel and does not need heating in most climates. Ships use it in auxiliary engines, in smaller main engines, for boiler lighting and when entering emission control areas. The standard limits sulphur through MARPOL, which is 0.50 percent in global waters and 0.10 percent in ECAs. DMA has a maximum viscosity of 6 mm2/s at 40 C and maximum density of 890 kg/m3 at 15 C.

⬡What it is made of

Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.

⚛الكيمياء

Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.

⚙How it is made

Distilled from crude in the CDU and hydrotreated; may be blended with cracked gasoil and kerosene components.

▶How it works

Burns in diesel engines without heating. Low viscosity requires cooling the fuel at the injectors to keep the viscosity above minimum for lubrication.

▣Storage, loading and inspection

Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.

★Why it matters in the Gulf

Fujairah is one of the world's largest bunkering hubs and supplies MGO to ships passing the Strait of Hormuz. No emission control area covers the Gulf (the ECAs are the Baltic Sea, North Sea, North America, the US Caribbean and the Mediterranean), but ships may buy MGO for ECA calls elsewhere. Current volumes are not stated.

الجزيئات الرئيسية

المعايير والمواصفات

ISO 8217Marine fuels standard; DMA grade: viscosity 2.0 to 6.0 mm2/s at 40 C, density 890 kg/m3 max, flash point 60 C min.
MARPOL Annex VI0.50% global and 0.10% ECA sulphur limits (IMO).
ISO 4259Precision of test methods and use of precision data.

المخاطر

UN1202 (diesel fuel or gas oil)الفئة Class 3 flammable liquid, packing group III (when shipped as dangerous goods)

SOLAS requires a flash point of at least 60 C for ship fuel, with a narrow exception for emergency equipment.

كيف يُتداول

Units

Metric tonnes

Benchmarks

Platts MGO assessments at Fujairah, Singapore, Rotterdam and other ports; ICE Gasoil futures as reference

Typical cargo

Barge deliveries of 100 to 2,000 mt; bulk cargoes by MR tanker

Incoterms

FOB barge at the port or delivered ex-wharf; ships purchase on a DAP basis at anchorage.

Notes

Sold per mt with a BDN (bunker delivery note) and MARPOL sample.

المصافي التي تنتجه: ترشيحاتنا

152 من المصافي المدرجة تنتج هذا المنتج، منها 42 في الخليج وإيران والعراق. نرتّب مصانع الخليج أولاً، ثم المصانع العاملة، ثم بحسب الطاقة.

شاهد كل 152 على الخريطة

المحطات التي تتعامل معه

هل تعلم

💡 MGO is the cleanest standard marine fuel and a distillate similar to No. 2 diesel.

💡 DMA is limited to 6.0 mm2/s at 40 C, while the residual grade RMG 380 is limited to 380 mm2/s at 50 C.

اختبر نفسك في Marine Gasoil MGO (DMA)

السؤال 1 من 3 · النتيجة 0 · السلسلة 0

What is the max viscosity of DMA at 40 C?

المزيد في هذه المجموعة

المصادر

كُتب بأسلوب PST من المصادر أعلاه. الثقة في البيانات: medium. تختلف القيم المعتادة بحسب المنشأ والعقد، فاقرأ دائماً المواصفات الواردة في عقدك.