Bitumen production and blowing
Refinery process
Bitumen is the heavy residue from vacuum distillation, sometimes blown with air to make it harder. It is mainly used for road paving and roofing.
- Feed
- Vacuum residue from suitable crudes (or deasphalter pitch)
- Makes
- Paving grade bitumen, Oxidised (blown) bitumen for roofing and industrial use, Polymer-modified bitumen
- Temperature
- Stored and shipped at about 150
- Catalyst
- None (air oxidation)
Process flow
What it does
Bitumen, also called asphalt, is the heaviest fraction of crude, with a boiling point above about 500 degrees Celsius. Vacuum distillation can produce straight-run bitumen directly from suitable crudes. To meet harder grades, the residue can be blown with air in a blowing column: oxygen reacts with the heavy molecules, which makes the product harder and more viscous. Solvent deasphalting provides another source. The finished bitumen is stored and shipped hot, around 150 degrees Celsius, and may be modified with polymers or recycled rubber to improve performance.
Step by step
- Selected vacuum residue is taken from the vacuum tower
- Residue may be heated and fed to an air blowing vessel
- Air is bubbled through the hot residue
- Oxidation and condensation raise hardness and softening point
- Off-gas is treated or incinerated
- The product is cooled and tested for penetration and softening point
- Bitumen is stored hot, modified if needed, and loaded
The chemistry
Air blowing links large molecules and forms more asphaltenes at the expense of oils, so the product becomes stiffer. The details depend on the crude and are not shown as a single balanced equation.
Main equipment
- Blowing column
- Heater
- Hot oil heating system
- Heated storage tanks
- Loading arms
Safety
Hot bitumen causes severe burns, and blowing off-gas contains hydrogen sulphide and hydrocarbons. Hot tanks can foam or boil over if water enters.
Test yourself
Material boiling above about what temperature is considered asphalt?
Related
- Vacuum distillation (VDU)Refinery process
- Solvent deasphaltingRefinery process
- Product blending and additivesRefinery process
Sources
Written in PST's own words from the sources above. Confidence in the data: medium. Real plants differ in design and operating conditions.