Skip to content

← All processes

Solvent deasphalting

Refinery process

Solvent deasphalting uses a light hydrocarbon such as propane or butane to precipitate asphalt from vacuum residue. It yields a cleaner deasphalted oil for cracking or lubricants.

Feed
Vacuum residue
Makes
Deasphalted oil (DAO), Asphalt (pitch), Recovered solvent (recycled)
Catalyst
None (physical extraction); propane, butane or pentane solvent

Process flow

What it does

Vacuum residue contains asphaltenes and metals that poison catalysts. In deasphalting, the residue is mixed with a light solvent that dissolves the oily aliphatic fraction but not the asphaltenes. The asphalt phase settles out, and the solvent is then recovered from both streams and recycled. The choice of solvent controls the result: propane gives the best quality deasphalted oil but a low yield, while pentane gives much higher yield but with more metals and carbon residue. The asphalt can be blended into bitumen or fuel oil or fed to a gasifier or coker.

Step by step

  1. Vacuum residue is mixed with solvent
  2. The mixture enters an extractor
  3. Asphalt separates as a heavy phase
  4. DAO dissolved in solvent leaves the top
  5. Solvent is recovered by flashing and stripping
  6. DAO goes to cracking or lube processing
  7. Asphalt is cooled and sent to blending or upgrading

The chemistry

No chemical reaction is intended. Light alkanes dissolve molecules similar to themselves, so saturated oils dissolve while polar, aromatic asphaltenes do not and precipitate.

Main equipment

  • Extractor
  • Solvent recovery columns
  • Supercritical solvent recovery (some designs)
  • Asphalt stripper

Safety

Light hydrocarbon solvent is highly flammable and large inventories must be contained.

Test yourself

Question 1 of 3 · Score 0 · Streak 0

What solvents are used?

Related

Sources

Written in PST's own words from the sources above. Confidence in the data: high. Real plants differ in design and operating conditions.