Crude oils and condensates
Iranian Light
Iranian Light is an Iranian medium-sour grade, about 33 degrees API and 1.5 percent sulphur, loaded at Kharg Island.
← All productsAlso called: Iran Light
- Density856 to 861 kg/m³
- SulphurAbout 1.50 % m/m (assay table)
- HazardUN1267, Class 3 (flammable liquid); packing group depends on flash point and initial boiling point


Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo. Photograph: made from a reference photo by Glasbruch2007, CC BY-SA 3.0, via Wikimedia Commons.
Stir the liquid to feel how thick it is
Move the mouse or a finger across the liquid. Press and drag to stir harder. Keyboard: arrow keys stir, Space shakes.
Very thin Water-thin or thinner. Ripples run fast and ring for a long time.
- Stir speed
- 0 px/s
- Liquid movement
- 0%
- Settled after
- -
- Surface
- Still
The class is a guide for feel. The viscosity figure shown is the one in the specification data.
How it looks
Brown to black liquid
Where it is used
- Refinery feedstock for medium-sour slates
- Blending component
- Source of middle distillates
Handling and safety
- Crude moves by pipeline to a terminal, is stored in floating-roof tanks and is loaded by loading arms or single point moorings onto tankers under inert gas. Independent inspectors sample under ASTM D4057 or API MPMS Chapter 8, measure water and sediment and quantity, and issue a quality and quantity certificate at loading.
- UN 1267 is the shipping name 'Petroleum crude oil'. Vapours are heavier than air and may carry hydrogen sulphide and benzene; static ignition is a risk during loading, so tanks and decks need gas monitoring and inerting.
Typical properties
- Appearance
- Brown to black liquid
- Density at 15 °C
- 856 to 861 kg/m³
- Typical sulphur
- About 1.50 % m/m (assay table)
◉What it is
A named crude grade is a stream that is gathered, blended and delivered from a defined export point so that cargoes keep a consistent quality. An assay table lists Iranian Light at 33.1 degrees API and 1.50 percent sulphur with Kharg Island as the terminal. Wikipedia says up to 90 percent of Iran's oil exports (crude, gas liquids, fertiliser and others) pass through Kharg, which can load 10 supertankers at once and store up to 30 million barrels. Per EIA figures cited there, Iran exported about 1.4 million barrels per day of crude and condensate in 2023. The density range in the properties is derived from the API gravity range with the standard conversion (relative density = 141.5 / (API + 131.5)); it is a calculation, not a published density. Pour point, flash point, viscosity and boiling range are not published in the sources checked, so they are left blank rather than guessed.
⬡What it is made of
A medium-gravity, moderately sour crude. About 33 degrees API.
⚛The chemistry
Crude oil is a continuous mixture of hydrocarbons: alkanes (paraffins), cycloalkanes (naphthenes) and aromatics such as benzene, plus heavy resins and asphaltenes. Sulphur sits mainly in thiols, sulphides and thiophenes and in dissolved hydrogen sulphide; the more of it a crude carries, the more hydrotreating a refinery needs to meet fuel sulphur limits. Lighter crudes contain a higher share of short, saturated chains that boil at low temperatures.
⚙How it is made
Produced in Iran and loaded at Kharg Island.
▶How it works
API gravity is 141.5 divided by relative density at 60 F, minus 131.5, so a higher figure means a lighter crude. In a refinery the crude is first split in an atmospheric distillation unit and the cuts are upgraded in hydrotreaters, reformers and crackers. Pricing terms are not published in the sources checked; sanctions affect Iranian trade.
▣Storage, loading and inspection
Crude moves by pipeline to a terminal, is stored in floating-roof tanks and is loaded by loading arms or single point moorings onto tankers under inert gas. Independent inspectors sample under ASTM D4057 or API MPMS Chapter 8, measure water and sediment and quantity, and issue a quality and quantity certificate at loading.
★Why it matters in the Gulf
Iran is a Gulf producer whose crude mostly goes to China, according to Wikipedia, under sanctions since 2018.
Key molecules
Standards and specifications
| ASTM D4052 / ISO 12185 | Density by digital density meter, used to derive API gravity for cargo documents. |
|---|---|
| ASTM D4294 / ISO 8754 | Sulphur content by X-ray fluorescence. |
| ASTM D4057 / API MPMS Ch. 8.1 | Manual sampling of petroleum liquids for cargo quality determination. |
| ASTM D5853 | Pour point of crude oils; relevant to waxy grades. |
| Producer sales specification | A grade is sold against the producer's own assay and quality specification, not one public standard. |
Hazards
UN 1267 is the shipping name 'Petroleum crude oil'. Vapours are heavier than air and may carry hydrogen sulphide and benzene; static ignition is a risk during loading, so tanks and decks need gas monitoring and inerting.
How it is traded
Units
Barrels (bbl); cargo sizes in thousand barrels; US dollars per barrel
Benchmarks
Not published in the sources checked
Typical cargo
VLCC about 2 million barrels, Suezmax about 1 million barrels, Aframax about 600,000 barrels (depends on terminal draft)
Incoterms
FOB at the loading terminal is common; CFR or CIF for delivered sales
Notes
Iranian trade is subject to sanctions, so any real transaction needs legal review.
Did you know
💡 Kharg can load 10 supertankers at the same time.
Test yourself on Iranian Light
Through which terminal do up to 90 percent of Iran's oil exports pass?
More in this group
- Arab Extra Light
- Arab Light
- Arab Medium
- Arab Heavy
- Murban
- Upper Zakum
- Das Blend
- Umm Lulu
- Basrah Medium
- Basrah Heavy
- Kuwait Export Blend
- Qatar Marine
Sources
- Wikipedia: List of crude oil products
- Wikipedia: Kharg Island
- Wikipedia: Petroleum industry in Iran
- Wikipedia: List of UN numbers 1201 to 1300
Written in PST's own words from the sources above. Confidence in the data: medium. Typical values vary by origin and contract, so always read the specification in your own contract.



