Crude oils and condensates
Saharan Blend
Saharan Blend is Algeria's main export grade, about 45 degrees API and under 0.1 percent sulphur.
← All productsAlso called: Sahara Blend, Algerian condensate-light blend
- Density799 to 803 kg/m³
- SulphurAbout 0.05 to 0.09 % m/m (two sources)
- HazardUN1267, Class 3 (flammable liquid); packing group depends on flash point and initial boiling point


Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo. Photograph: made from a reference photo by Glasbruch2007, CC BY-SA 3.0, via Wikimedia Commons.
Stir the liquid to feel how thick it is
Move the mouse or a finger across the liquid. Press and drag to stir harder. Keyboard: arrow keys stir, Space shakes.
Very thin Water-thin or thinner. Ripples run fast and ring for a long time.
- Stir speed
- 0 px/s
- Liquid movement
- 0%
- Settled after
- -
- Surface
- Still
The class is a guide for feel. The viscosity figure shown is the one in the specification data.
How it looks
Brown to black liquid
Where it is used
- Refinery feedstock for light products
- Feed to European and Mediterranean refineries
- Blending component
Handling and safety
- Crude moves by pipeline to a terminal, is stored in floating-roof tanks and is loaded by loading arms or single point moorings onto tankers under inert gas. Independent inspectors sample under ASTM D4057 or API MPMS Chapter 8, measure water and sediment and quantity, and issue a quality and quantity certificate at loading.
- UN 1267 is the shipping name 'Petroleum crude oil'. Vapours are heavier than air and may carry hydrogen sulphide and benzene; static ignition is a risk during loading, so tanks and decks need gas monitoring and inerting.
Typical properties
- Appearance
- Brown to black liquid
- Density at 15 °C
- 799 to 803 kg/m³
- Typical sulphur
- About 0.05 to 0.09 % m/m (two sources)
◉What it is
A named crude grade is a stream that is gathered, blended and delivered from a defined export point so that cargoes keep a consistent quality. Wikipedia gives about 45 degrees API and 0.05 percent sulphur (with a citation-needed tag), and an assay table lists Sahara Blend at 45 degrees API and 0.09 percent sulphur, operator Sonatrach. Wikipedia says it is listed on the London market and is the benchmark for Algerian barrel pricing. The density range in the properties is derived from the API gravity range with the standard conversion (relative density = 141.5 / (API + 131.5)); it is a calculation, not a published density. Pour point, flash point, viscosity and boiling range are not published in the sources checked, so they are left blank rather than guessed.
⬡What it is made of
A very light, very low-sulphur crude. About 45 degrees API.
⚛The chemistry
Crude oil is a continuous mixture of hydrocarbons: alkanes (paraffins), cycloalkanes (naphthenes) and aromatics such as benzene, plus heavy resins and asphaltenes. Sulphur sits mainly in thiols, sulphides and thiophenes and in dissolved hydrogen sulphide; the more of it a crude carries, the more hydrotreating a refinery needs to meet fuel sulphur limits. Lighter crudes contain a higher share of short, saturated chains that boil at low temperatures.
⚙How it is made
Produced in Algeria by Sonatrach; loading terminals are not confirmed in the sources used.
▶How it works
API gravity is 141.5 divided by relative density at 60 F, minus 131.5, so a higher figure means a lighter crude. In a refinery the crude is first split in an atmospheric distillation unit and the cuts are upgraded in hydrotreaters, reformers and crackers. Wikipedia says it is the benchmark for pricing Algerian barrels.
▣Storage, loading and inspection
Crude moves by pipeline to a terminal, is stored in floating-roof tanks and is loaded by loading arms or single point moorings onto tankers under inert gas. Independent inspectors sample under ASTM D4057 or API MPMS Chapter 8, measure water and sediment and quantity, and issue a quality and quantity certificate at loading.
★Why it matters in the Gulf
No Gulf-specific claim is made.
Key molecules
Standards and specifications
| ASTM D4052 / ISO 12185 | Density by digital density meter, used to derive API gravity for cargo documents. |
|---|---|
| ASTM D4294 / ISO 8754 | Sulphur content by X-ray fluorescence. |
| ASTM D4057 / API MPMS Ch. 8.1 | Manual sampling of petroleum liquids for cargo quality determination. |
| ASTM D5853 | Pour point of crude oils; relevant to waxy grades. |
| Producer sales specification | A grade is sold against the producer's own assay and quality specification, not one public standard. |
Hazards
UN 1267 is the shipping name 'Petroleum crude oil'. Vapours are heavier than air and may carry hydrogen sulphide and benzene; static ignition is a risk during loading, so tanks and decks need gas monitoring and inerting.
How it is traded
Units
Barrels (bbl); cargo sizes in thousand barrels; US dollars per barrel
Benchmarks
Sahara Blend is the benchmark for Algerian barrels (Wikipedia)
Typical cargo
VLCC about 2 million barrels, Suezmax about 1 million barrels, Aframax about 600,000 barrels (depends on terminal draft)
Incoterms
FOB at the loading terminal is common; CFR or CIF for delivered sales
Notes
Terms are not published in the sources checked.
Did you know
💡 Its sulphur content is under one tenth of a percent.
Test yourself on Saharan Blend
About what gravity do the sources give for Saharan Blend?
More in this group
- Arab Extra Light
- Arab Light
- Arab Medium
- Arab Heavy
- Murban
- Upper Zakum
- Das Blend
- Umm Lulu
- Basrah Medium
- Basrah Heavy
- Kuwait Export Blend
- Qatar Marine
Sources
- Wikipedia: List of crude oil products
- Wikipedia: Sahara Blend
- Wikipedia: List of UN numbers 1201 to 1300
Written in PST's own words from the sources above. Confidence in the data: medium. Typical values vary by origin and contract, so always read the specification in your own contract.



