Lubricants and waxes
Base Oil Group II
Group II base oils are hydroprocessed mineral oils with at least 90 percent saturates and sulphur at or below 0.03 percent. They are the main base stock for modern engine oils.
← Todos los productosTambién llamado: Group II base oil, Hydroprocessed base oil
- Punto de inflamación200 to 250 C typical (open cup)
- Densidad840 to 870 kg/m³
- ViscosidadAbout 4 to 10 mm2/s at 100 C depending on grade
- Flujo en frío-12 to -18 C typical
- AzufreLess than 0.03% (often below 10 ppm)
- Rango de ebullición300 to 550 °C


Créditos de las imágenes Las muestras en vidrio de laboratorio se elaboran a partir de fotos de referencia de Wikimedia Commons de Chemik10 (CC BY-SA 2.5) y una foto de muestra de petróleo CC0.
Agite el líquido para sentir su espesor
Mueva el ratón o un dedo sobre el líquido. Mantenga pulsado y arrastre para agitar con más fuerza. Teclado: las flechas agitan, la barra espaciadora sacude.
Espeso Pesado. Se resiste a la agitación y solo se mueve despacio.
Viscosidad típica según los datosAbout 4 to 10 mm2/s at 100 C depending on grade
- Velocidad de agitación
- 0 px/s
- Movimiento del líquido
- 0%
- Se calma tras
- -
- Superficie
- Quieto
La clase es solo una guía de sensación. La viscosidad indicada es la de los datos de la especificación.
Aspecto
Water-white to pale yellow
Dónde se utiliza
- Engine oils (SAE 5W-30, 10W-40)
- Hydraulic and turbine oils
- Gear oils
- Transformer oils
Manipulación y seguridad
- Store in clean, dry closed tanks away from heat. Keep different grades separate to avoid contamination. Sample per ASTM D4057; inspect colour, viscosity, flash point and water. Drums, IBCs and flexitanks are common packaging.
- Combustible at high temperature. Hot product causes burns. Low acute toxicity; mist inhalation and prolonged skin contact should be avoided.
Propiedades típicas
- Aspecto
- Water-white to pale yellow
- Densidad a 15 °C
- 840 to 870 kg/m³
- Rango de ebullición
- 300 to 550 °C
- Punto de inflamación
- 200 to 250 C typical (open cup)
- Viscosidad
- About 4 to 10 mm2/s at 100 C depending on grade
- Punto de fluidez
- -12 to -18 C typical
- Azufre típico
- Less than 0.03% (often below 10 ppm)
◉What it is
Group II oils have at least 90 percent saturates and no more than 0.03 percent sulphur, with a viscosity index of 80 to under 120 (Wikipedia). They are made by hydroprocessing rather than solvent extraction, so they are clearer, more stable and more consistent than Group I. Group II is widely used for passenger car and heavy-duty engine oils. Viscosity grades are given in cSt at 100 C or by Neutral numbers such as N 100, N 150 or N 600.
⬡What it is made of
C20 to C40 saturated paraffins and naphthenes.
⚛La química
Hydrogenation saturates aromatic rings and removes sulphur and nitrogen, leaving cycloalkanes and isoparaffins. Branched isoparaffins give low pour point and good viscosity index; saturated structure improves oxidation stability.
⚙How it is made
Vacuum gasoil is hydrocracked or severely hydrotreated vacuum distillate, then catalytically dewaxed.
▶How it works
Base oil forms the bulk of the lubricant and provides film thickness, heat transfer and solvency for additives. Higher saturates and viscosity index give longer drain intervals.
▣Storage, loading and inspection
Store in clean, dry closed tanks away from heat. Keep different grades separate to avoid contamination. Sample per ASTM D4057; inspect colour, viscosity, flash point and water. Drums, IBCs and flexitanks are common packaging.
★Why it matters in the Gulf
Group II and III base oils are traded into the region for lubricant blending, including blending plants at Jebel Ali. Gulf production plants are not stated.
Moléculas clave
Normas y especificaciones
| API 1509 | Group classification |
|---|---|
| ASTM D445 and D2270 | Viscosity and VI |
| ACEA and ILSAC | Engine oil standards that drive demand |
Peligros
Combustible at high temperature. Hot product causes burns. Low acute toxicity; mist inhalation and prolonged skin contact should be avoided.
Cómo se comercializa
Units
Metric tonnes; drums; flexitanks
Benchmarks
Platts Group II and III base oil assessments FOB Arab Gulf, Asia and Europe
Typical cargo
Parcels of 1,000 to 10,000 mt; containerised lots
Incoterms
FOB, CFR, CIF; drums and ISO tanks FCA or DAP
Notes
Group III is also called VHVI or hydrocracked base oil.
Refinerías que lo producen: nuestras sugerencias
38 refinerías de la lista producen este producto, 18 de ellas en el Golfo, Irán e Irak. Ordenamos primero las plantas del Golfo, después las que están en operación y luego por capacidad.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAcceso de exportación
- 2Daura Refinery
Iraq · 140,000 bpdGulf locationOperating
- 3Pearl GTL
Qatar · 140,000 bpdGulf locationOperatingAcceso de exportación
- 4Najaf Refinery
Iraq · 30,000 bpdGulf locationOperating
- 5Bahrain Lube Base Oil Plant (BLBOC)
Bahrain · 8,000 bpdGulf locationOperatingAcceso de exportación
- 6Sepahan Oil Company
Iran · Not publishedGulf locationOperatingAcceso de exportación
Terminales que lo manipulan
- Gulf Petrochem Hamriyah terminal
United Arab Emirates
- Regal Petro Trading terminal, Hamriyah
United Arab Emirates
- Sharafco Petroleum terminal, Hamriyah
United Arab Emirates
- Sharlu base oil terminal, Hamriyah
United Arab Emirates
¿Sabía que…?
💡 Group III is marketed by some blenders as synthetic technology although it is mineral-based.
💡 The shift to low-viscosity engine oils drives growth in Group II and III.
Póngase a prueba sobre Base Oil Group II
What is the VI of Group II?
Más de este grupo
- Base Oil Group I (SN 150, SN 500, Bright Stock)
- Base Oil Group III
- White Oil (Medicinal and Technical)
- Paraffin Wax
- Slack Wax
Fuentes
Redactado con palabras propias de PST a partir de las fuentes anteriores. Fiabilidad de los datos: medium. Los valores típicos varían según el origen y el contrato, por lo que debe leer siempre la especificación de su propio contrato.





