پرش به محتوا

Lubricants and waxes

Base Oil Group I (SN 150, SN 500, Bright Stock)

Group I base oils are solvent-refined mineral oils with less than 90 percent saturates and/or more than 0.03 percent sulphur, and a viscosity index of 80 to under 120. SN 150, SN 500 and bright stock are common viscosity grades.

← همهٔ محصولاتنام‌های دیگر: Group I base oil, Solvent refined base oil, SN 150, SN 500, Bright stock, Solvent neutral

  • نقطهٔ اشتعالSN 150 about 210 C; SN 500 about 240 C; bright stock about 290 C (open cup)
  • چگالی860 to 900 kg/m³
  • گرانرویSN 150: about 30 mm2/s at 40 C; SN 500: about 100 mm2/s at 40 C; bright stock: about 30 mm2/s at 100 C
  • جریان در سرماSN 150 about -9 C; SN 500 about -9 to -6 C; bright stock about -6 C to 0 C
  • گوگرد0.03% to 1% (above 0.03% by definition)
  • بازهٔ جوش300 to 600 °C
رنگ معمول، ظرف شیشه‌ای آزمایشگاهی
نمونهٔ Base Oil Group I (SN 150, SN 500, Bright Stock) در شیشهٔ آزمایشگاهی، با رنگ معمول آن
نمونه‌ای از Base Oil Group I (SN 150, SN 500, Bright Stock) در ظرف شیشه‌ای آزمایشگاهی روی پس‌زمینه تیره استودیویی، تا رنگ آن به‌راحتی قابل ارزیابی باشد.
عکس مرجع
نحوه نگهداری و جابه‌جایی Base Oil Group I (SN 150, SN 500, Bright Stock) در عمل.

منبع تصاویر نمونه‌های شیشه‌ای آزمایشگاهی از روی عکس‌های مرجع در ویکی‌مدیا کامنز ساخته شده‌اند، اثر Chemik10 (CC BY-SA 2.5) و یک عکس نمونهٔ نفتی با مجوز CC0.

مایع را هم بزنید تا غلظت آن را حس کنید

ماوس یا انگشت را روی مایع حرکت دهید. برای هم‌زدن شدیدتر، فشار دهید و بکشید. صفحه‌کلید: کلیدهای جهت‌دار هم می‌زنند و Space تکان می‌دهد.

غلیظ
رنگ بر اساس رنگ معمول Base Oil Group I (SN 150, SN 500, Bright Stock) است.
رقیق و روانغلیظ و سنگین

غلیظ سنگین. در برابر هم‌زدن مقاومت می‌کند و فقط آهسته حرکت می‌کند.

گرانروی معمول بر اساس داده‌هاSN 150: about 30 mm2/s at 40 C; SN 500: about 100 mm2/s at 40 C; bright stock: about 30 mm2/s at 100 C

سرعت هم‌زدن
0 px/s
حرکت مایع
0%
آرام‌گرفتن پس از
-
سطح
ساکن

این رده فقط راهنمای حس مایع است. عدد گرانروی نمایش‌داده‌شده همان است که در داده‌های مشخصات آمده.

ظاهر محصول

Light yellow to amber, bright

کاربردها

  • Engine oils (older formulations)
  • Industrial and marine lubricants
  • Greases
  • Metalworking fluids
  • Rubber process oils

جابه‌جایی و ایمنی

  • Store in clean, dry closed tanks away from heat. Keep different grades separate to avoid contamination. Sample per ASTM D4057; inspect colour, viscosity, flash point and water. Drums, IBCs and flexitanks are common packaging.
  • Combustible at high temperature. Hot product causes burns. Low acute toxicity; mist inhalation and prolonged skin contact should be avoided.

ویژگی‌های معمول

ظاهر
Light yellow to amber, bright
چگالی در 15 °C
860 to 900 kg/m³
بازهٔ جوش
300 to 600 °C
نقطهٔ اشتعال
SN 150 about 210 C; SN 500 about 240 C; bright stock about 290 C (open cup)
گرانروی
SN 150: about 30 mm2/s at 40 C; SN 500: about 100 mm2/s at 40 C; bright stock: about 30 mm2/s at 100 C
نقطهٔ ریزش
SN 150 about -9 C; SN 500 about -9 to -6 C; bright stock about -6 C to 0 C
گوگرد معمول
0.03% to 1% (above 0.03% by definition)

◉What it is

Group I is the oldest and least refined API base oil category. It is made from vacuum distillates and deasphalted residue using solvents to remove aromatics and wax. API defines it as having less than 90 percent saturates and/or more than 0.03 percent sulphur, with a viscosity index of 80 to under 120 (Wikipedia). SN means solvent neutral, and the number is roughly the viscosity in Saybolt seconds at 100 F: SN 150 is a light grade, SN 500 a medium-heavy grade. Bright stock is the heaviest grade, made from deasphalted vacuum residue, with a viscosity of about 30 mm2/s at 100 C.

⬡What it is made of

C26 to C40 paraffins, naphthenes and aromatics (Wikipedia: 26 to 40 carbon fraction).

⚛شیمی

The oil contains branched and cyclic hydrocarbons. Remaining aromatics and sulphur compounds oxidise more easily than saturates, which limits oil life. Solvent refining removes polar aromatics, raising viscosity index.

⚙How it is made

Vacuum distillates are extracted with furfural or NMP to remove aromatics, dewaxed with MEK or toluene solvent, and finally hydrofinished. Bright stock comes from propane-deasphalted vacuum residue.

▶How it works

Base oil makes up 70 to 99 percent of a lubricant. Viscosity grade decides film thickness; viscosity index measures how little viscosity changes with temperature; saturates and low sulphur control oxidation stability.

▣Storage, loading and inspection

Store in clean, dry closed tanks away from heat. Keep different grades separate to avoid contamination. Sample per ASTM D4057; inspect colour, viscosity, flash point and water. Drums, IBCs and flexitanks are common packaging.

★Why it matters in the Gulf

Group I base oil supply is concentrated in a few regional lube plants and is shrinking worldwide as Group II and III grow. Gulf plant lists and volumes are not stated.

مولکول‌های کلیدی

استانداردها و مشخصات

API 1509 Annex EDefines base oil groups I to V
ASTM D445Kinematic viscosity
ASTM D2270Viscosity index

خطرات

Not regulatedکلاس Not classified as dangerous goods for transport

Combustible at high temperature. Hot product causes burns. Low acute toxicity; mist inhalation and prolonged skin contact should be avoided.

نحوهٔ معامله

Units

Metric tonnes; drums; flexitanks of 20 to 24 mt

Benchmarks

Platts Group I base oil assessments (SN 150, SN 500, bright stock) FOB Arab Gulf and Northwest Europe

Typical cargo

Parcels of 500 to 5,000 mt on small product tankers; containers

Incoterms

FOB, CFR, CIF; drums and ISO tanks FCA or DAP

Notes

Group I supply is shrinking as refiners shut solvent plants.

پالایشگاه‌هایی که آن را تولید می‌کنند: پیشنهاد ما

38 پالایشگاه فهرست‌شده این محصول را تولید می‌کنند که 18 تا از آن‌ها در خلیج فارس، ایران و عراق است. پالایشگاه‌های خلیج فارس را اول می‌آوریم، سپس واحدهای در حال بهره‌برداری، و بعد بر اساس ظرفیت.

دیدن هر 38 مورد روی نقشه

ترمینال‌هایی که آن را جابه‌جا می‌کنند

می‌دانستید؟

💡 Bright stock is the heaviest Group I grade and is used in gear oils and greases.

💡 Group I output is falling worldwide as Group II and III oils gain share.

خودتان را در مورد Base Oil Group I (SN 150, SN 500, Bright Stock) بسنجید

پرسش 1 از 3 · امتیاز 0 · رکورد پیاپی 0

What do Group I oils have by definition?

موارد بیشتر در این گروه

منابع

با بیان خود PST و بر پایهٔ منابع بالا نوشته شده است. اطمینان از داده: medium. مقادیر معمول بسته به مبدأ و قرارداد فرق می‌کند، پس مشخصات را همیشه در قرارداد خودتان بخوانید.