Lubricants and waxes
Base Oil Group III
Group III base oils are hydroprocessed mineral oils with at least 90 percent saturates and sulphur at or below 0.03 percent. They are the main base stock for modern engine oils.
← همهٔ محصولاتنامهای دیگر: Group III base oil, Hydroprocessed base oil
- نقطهٔ اشتعال200 to 250 C typical (open cup)
- چگالی840 to 870 kg/m³
- گرانرویAbout 4 to 10 mm2/s at 100 C depending on grade
- جریان در سرما-12 to -18 C typical
- گوگردLess than 0.03% (often below 10 ppm)
- بازهٔ جوش300 to 550 °C


منبع تصاویر نمونههای شیشهای آزمایشگاهی از روی عکسهای مرجع در ویکیمدیا کامنز ساخته شدهاند، اثر Chemik10 (CC BY-SA 2.5) و یک عکس نمونهٔ نفتی با مجوز CC0.
مایع را هم بزنید تا غلظت آن را حس کنید
ماوس یا انگشت را روی مایع حرکت دهید. برای همزدن شدیدتر، فشار دهید و بکشید. صفحهکلید: کلیدهای جهتدار هم میزنند و Space تکان میدهد.
غلیظ سنگین. در برابر همزدن مقاومت میکند و فقط آهسته حرکت میکند.
گرانروی معمول بر اساس دادههاAbout 4 to 10 mm2/s at 100 C depending on grade
- سرعت همزدن
- 0 px/s
- حرکت مایع
- 0%
- آرامگرفتن پس از
- -
- سطح
- ساکن
این رده فقط راهنمای حس مایع است. عدد گرانروی نمایشدادهشده همان است که در دادههای مشخصات آمده.
ظاهر محصول
Water-white to pale yellow
کاربردها
- Engine oils (SAE 5W-30, 10W-40)
- Hydraulic and turbine oils
- Gear oils
- Transformer oils
جابهجایی و ایمنی
- Store in clean, dry closed tanks away from heat. Keep different grades separate to avoid contamination. Sample per ASTM D4057; inspect colour, viscosity, flash point and water. Drums, IBCs and flexitanks are common packaging.
- Combustible at high temperature. Hot product causes burns. Low acute toxicity; mist inhalation and prolonged skin contact should be avoided.
ویژگیهای معمول
- ظاهر
- Water-white to pale yellow
- چگالی در 15 °C
- 840 to 870 kg/m³
- بازهٔ جوش
- 300 to 550 °C
- نقطهٔ اشتعال
- 200 to 250 C typical (open cup)
- گرانروی
- About 4 to 10 mm2/s at 100 C depending on grade
- نقطهٔ ریزش
- -12 to -18 C typical
- گوگرد معمول
- Less than 0.03% (often below 10 ppm)
◉What it is
Group III oils have at least 90 percent saturates, no more than 0.03 percent sulphur and a viscosity index of at least 120 (Wikipedia). They are made by hydroprocessing rather than solvent extraction, so they are clearer, more stable and more consistent than Group I. Group III is widely used for passenger car and heavy-duty engine oils. Viscosity grades are given in cSt at 100 C or by Neutral numbers such as N 100, N 150 or N 600.
⬡What it is made of
C20 to C40 saturated paraffins and naphthenes.
⚛شیمی
Hydrogenation saturates aromatic rings and removes sulphur and nitrogen, leaving cycloalkanes and isoparaffins. Branched isoparaffins give low pour point and good viscosity index; saturated structure improves oxidation stability.
⚙How it is made
Vacuum gasoil is hydrocracked and hydroisomerised vacuum distillate, with VI raised by isomerising wax.
▶How it works
Base oil forms the bulk of the lubricant and provides film thickness, heat transfer and solvency for additives. Higher saturates and viscosity index give longer drain intervals.
▣Storage, loading and inspection
Store in clean, dry closed tanks away from heat. Keep different grades separate to avoid contamination. Sample per ASTM D4057; inspect colour, viscosity, flash point and water. Drums, IBCs and flexitanks are common packaging.
★Why it matters in the Gulf
Group II and III base oils are traded into the region for lubricant blending, including blending plants at Jebel Ali. Gulf production plants are not stated.
مولکولهای کلیدی
استانداردها و مشخصات
| API 1509 | Group classification |
|---|---|
| ASTM D445 and D2270 | Viscosity and VI |
| ACEA and ILSAC | Engine oil standards that drive demand |
خطرات
Combustible at high temperature. Hot product causes burns. Low acute toxicity; mist inhalation and prolonged skin contact should be avoided.
نحوهٔ معامله
Units
Metric tonnes; drums; flexitanks
Benchmarks
Platts Group II and III base oil assessments FOB Arab Gulf, Asia and Europe
Typical cargo
Parcels of 1,000 to 10,000 mt; containerised lots
Incoterms
FOB, CFR, CIF; drums and ISO tanks FCA or DAP
Notes
Group III is also called VHVI or hydrocracked base oil.
پالایشگاههایی که آن را تولید میکنند: پیشنهاد ما
38 پالایشگاه فهرستشده این محصول را تولید میکنند که 18 تا از آنها در خلیج فارس، ایران و عراق است. پالایشگاههای خلیج فارس را اول میآوریم، سپس واحدهای در حال بهرهبرداری، و بعد بر اساس ظرفیت.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionدسترسی به صادرات
- 2Daura Refinery
Iraq · 140,000 bpdGulf locationOperating
- 3Pearl GTL
Qatar · 140,000 bpdGulf locationOperatingدسترسی به صادرات
- 4Najaf Refinery
Iraq · 30,000 bpdGulf locationOperating
- 5Bahrain Lube Base Oil Plant (BLBOC)
Bahrain · 8,000 bpdGulf locationOperatingدسترسی به صادرات
- 6Sepahan Oil Company
Iran · Not publishedGulf locationOperatingدسترسی به صادرات
ترمینالهایی که آن را جابهجا میکنند
- Gulf Petrochem Hamriyah terminal
United Arab Emirates
- Regal Petro Trading terminal, Hamriyah
United Arab Emirates
- Sharafco Petroleum terminal, Hamriyah
United Arab Emirates
- Sharlu base oil terminal, Hamriyah
United Arab Emirates
میدانستید؟
💡 Group III is marketed by some blenders as synthetic technology although it is mineral-based.
💡 Group III oils are fully produced by hydrocracking, hydroisomerisation and hydrotreating (Wikipedia).
خودتان را در مورد Base Oil Group III بسنجید
What is the VI of Group III?
موارد بیشتر در این گروه
- Base Oil Group I (SN 150, SN 500, Bright Stock)
- Base Oil Group II
- White Oil (Medicinal and Technical)
- Paraffin Wax
- Slack Wax
منابع
با بیان خود PST و بر پایهٔ منابع بالا نوشته شده است. اطمینان از داده: medium. مقادیر معمول بسته به مبدأ و قرارداد فرق میکند، پس مشخصات را همیشه در قرارداد خودتان بخوانید.





