Lubricants and waxes
Base Oil Group I (SN 150, SN 500, Bright Stock)
Group I base oils are solvent-refined mineral oils with less than 90 percent saturates and/or more than 0.03 percent sulphur, and a viscosity index of 80 to under 120. SN 150, SN 500 and bright stock are common viscosity grades.
← सभी उत्पादअन्य नाम: Group I base oil, Solvent refined base oil, SN 150, SN 500, Bright stock, Solvent neutral
- फ़्लैश पॉइंटSN 150 about 210 C; SN 500 about 240 C; bright stock about 290 C (open cup)
- घनत्व860 to 900 kg/m³
- विस्कॉसिटीSN 150: about 30 mm2/s at 40 C; SN 500: about 100 mm2/s at 40 C; bright stock: about 30 mm2/s at 100 C
- ठंड में प्रवाहSN 150 about -9 C; SN 500 about -9 to -6 C; bright stock about -6 C to 0 C
- सल्फर0.03% to 1% (above 0.03% by definition)
- क्वथनांक सीमा300 to 600 °C


चित्र श्रेय प्रयोगशाला काँच के नमूने Wikimedia Commons पर मौजूद संदर्भ तस्वीरों से बनाए गए हैं, द्वारा Chemik10 (CC BY-SA 2.5) और एक CC0 पेट्रोलियम नमूना फ़ोटो.
तरल को हिलाकर उसका गाढ़ापन महसूस करें
माउस या उँगली तरल के ऊपर चलाएँ। ज़ोर से हिलाने के लिए दबाकर खींचें। कीबोर्ड: तीर कुंजियाँ हिलाती हैं, Space झकझोरता है।
गाढ़ा भारी। यह हिलाने का विरोध करता है और केवल धीरे-धीरे चलता है।
डेटा से सामान्य श्यानताSN 150: about 30 mm2/s at 40 C; SN 500: about 100 mm2/s at 40 C; bright stock: about 30 mm2/s at 100 C
- हिलाने की गति
- 0 px/s
- तरल की गति
- 0%
- शांत होने में लगा समय
- -
- सतह
- स्थिर
यह श्रेणी केवल अनुभव का मार्गदर्शन है। दिखाया गया श्यानता मान विनिर्देश डेटा का मान है।
यह कैसा दिखता है
Light yellow to amber, bright
इसका उपयोग कहाँ होता है
- Engine oils (older formulations)
- Industrial and marine lubricants
- Greases
- Metalworking fluids
- Rubber process oils
हैंडलिंग और सुरक्षा
- Store in clean, dry closed tanks away from heat. Keep different grades separate to avoid contamination. Sample per ASTM D4057; inspect colour, viscosity, flash point and water. Drums, IBCs and flexitanks are common packaging.
- Combustible at high temperature. Hot product causes burns. Low acute toxicity; mist inhalation and prolonged skin contact should be avoided.
सामान्य गुण
- रूप-रंग
- Light yellow to amber, bright
- 15 °C पर डेंसिटी
- 860 to 900 kg/m³
- क्वथनांक सीमा
- 300 to 600 °C
- फ़्लैश पॉइंट
- SN 150 about 210 C; SN 500 about 240 C; bright stock about 290 C (open cup)
- विस्कॉसिटी
- SN 150: about 30 mm2/s at 40 C; SN 500: about 100 mm2/s at 40 C; bright stock: about 30 mm2/s at 100 C
- पोर पॉइंट
- SN 150 about -9 C; SN 500 about -9 to -6 C; bright stock about -6 C to 0 C
- सामान्य सल्फ़र
- 0.03% to 1% (above 0.03% by definition)
◉What it is
Group I is the oldest and least refined API base oil category. It is made from vacuum distillates and deasphalted residue using solvents to remove aromatics and wax. API defines it as having less than 90 percent saturates and/or more than 0.03 percent sulphur, with a viscosity index of 80 to under 120 (Wikipedia). SN means solvent neutral, and the number is roughly the viscosity in Saybolt seconds at 100 F: SN 150 is a light grade, SN 500 a medium-heavy grade. Bright stock is the heaviest grade, made from deasphalted vacuum residue, with a viscosity of about 30 mm2/s at 100 C.
⬡What it is made of
C26 to C40 paraffins, naphthenes and aromatics (Wikipedia: 26 to 40 carbon fraction).
⚛रसायन विज्ञान
The oil contains branched and cyclic hydrocarbons. Remaining aromatics and sulphur compounds oxidise more easily than saturates, which limits oil life. Solvent refining removes polar aromatics, raising viscosity index.
⚙How it is made
Vacuum distillates are extracted with furfural or NMP to remove aromatics, dewaxed with MEK or toluene solvent, and finally hydrofinished. Bright stock comes from propane-deasphalted vacuum residue.
▶How it works
Base oil makes up 70 to 99 percent of a lubricant. Viscosity grade decides film thickness; viscosity index measures how little viscosity changes with temperature; saturates and low sulphur control oxidation stability.
▣Storage, loading and inspection
Store in clean, dry closed tanks away from heat. Keep different grades separate to avoid contamination. Sample per ASTM D4057; inspect colour, viscosity, flash point and water. Drums, IBCs and flexitanks are common packaging.
★Why it matters in the Gulf
Group I base oil supply is concentrated in a few regional lube plants and is shrinking worldwide as Group II and III grow. Gulf plant lists and volumes are not stated.
मुख्य अणु
मानक और स्पेसिफिकेशन
| API 1509 Annex E | Defines base oil groups I to V |
|---|---|
| ASTM D445 | Kinematic viscosity |
| ASTM D2270 | Viscosity index |
ख़तरे
Combustible at high temperature. Hot product causes burns. Low acute toxicity; mist inhalation and prolonged skin contact should be avoided.
इसका व्यापार कैसे होता है
Units
Metric tonnes; drums; flexitanks of 20 to 24 mt
Benchmarks
Platts Group I base oil assessments (SN 150, SN 500, bright stock) FOB Arab Gulf and Northwest Europe
Typical cargo
Parcels of 500 to 5,000 mt on small product tankers; containers
Incoterms
FOB, CFR, CIF; drums and ISO tanks FCA or DAP
Notes
Group I supply is shrinking as refiners shut solvent plants.
इसे बनाने वाली रिफ़ाइनरियाँ: हमारे सुझाव
38 सूचीबद्ध रिफ़ाइनरियाँ यह उत्पाद बनाती हैं, उनमें से 18 खाड़ी, ईरान और इराक़ में हैं। हम पहले खाड़ी के प्लांट, फिर चालू प्लांट, फिर क्षमता के हिसाब से रखते हैं।
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionएक्सपोर्ट एक्सेस
- 2Daura Refinery
Iraq · 140,000 bpdGulf locationOperating
- 3Pearl GTL
Qatar · 140,000 bpdGulf locationOperatingएक्सपोर्ट एक्सेस
- 4Najaf Refinery
Iraq · 30,000 bpdGulf locationOperating
- 5Bahrain Lube Base Oil Plant (BLBOC)
Bahrain · 8,000 bpdGulf locationOperatingएक्सपोर्ट एक्सेस
- 6Sepahan Oil Company
Iran · Not publishedGulf locationOperatingएक्सपोर्ट एक्सेस
इसे संभालने वाले टर्मिनल
- Gulf Petrochem Hamriyah terminal
United Arab Emirates
- Regal Petro Trading terminal, Hamriyah
United Arab Emirates
- Sharafco Petroleum terminal, Hamriyah
United Arab Emirates
- Sharlu base oil terminal, Hamriyah
United Arab Emirates
क्या आप जानते हैं
💡 Bright stock is the heaviest Group I grade and is used in gear oils and greases.
💡 Group I output is falling worldwide as Group II and III oils gain share.
Base Oil Group I (SN 150, SN 500, Bright Stock) पर ख़ुद को परखें
What do Group I oils have by definition?
इस समूह में और
स्रोत
ऊपर दिए स्रोतों के आधार पर PST के अपने शब्दों में लिखा गया। डेटा की विश्वसनीयता: medium। सामान्य मान मूल और अनुबंध के अनुसार बदलते हैं, इसलिए हमेशा अपने अनुबंध का स्पेसिफिकेशन पढ़ें।





