Lubricants and waxes
Base Oil Group I (SN 150, SN 500, Bright Stock)
Group I base oils are solvent-refined mineral oils with less than 90 percent saturates and/or more than 0.03 percent sulphur, and a viscosity index of 80 to under 120. SN 150, SN 500 and bright stock are common viscosity grades.
← Tutti i prodottiDetto anche: Group I base oil, Solvent refined base oil, SN 150, SN 500, Bright stock, Solvent neutral
- Punto di infiammabilitàSN 150 about 210 C; SN 500 about 240 C; bright stock about 290 C (open cup)
- Densità860 to 900 kg/m³
- ViscositàSN 150: about 30 mm2/s at 40 C; SN 500: about 100 mm2/s at 40 C; bright stock: about 30 mm2/s at 100 C
- Flusso a freddoSN 150 about -9 C; SN 500 about -9 to -6 C; bright stock about -6 C to 0 C
- Zolfo0.03% to 1% (above 0.03% by definition)
- Intervallo di ebollizione300 to 600 °C


Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0.
Agitate il liquido per sentire quanto è denso
Muovete il mouse o un dito sul liquido. Premete e trascinate per agitare più forte. Tastiera: le frecce agitano, Spazio scuote.
Denso Pesante. Resiste all'agitazione e si muove solo lentamente.
Viscosità tipica dai datiSN 150: about 30 mm2/s at 40 C; SN 500: about 100 mm2/s at 40 C; bright stock: about 30 mm2/s at 100 C
- Velocità di agitazione
- 0 px/s
- Movimento del liquido
- 0%
- Si calma dopo
- -
- Superficie
- Fermo
La classe è solo una guida alla sensazione. Il valore di viscosità mostrato è quello dei dati di specifica.
Aspetto
Light yellow to amber, bright
Dove si usa
- Engine oils (older formulations)
- Industrial and marine lubricants
- Greases
- Metalworking fluids
- Rubber process oils
Manipolazione e sicurezza
- Store in clean, dry closed tanks away from heat. Keep different grades separate to avoid contamination. Sample per ASTM D4057; inspect colour, viscosity, flash point and water. Drums, IBCs and flexitanks are common packaging.
- Combustible at high temperature. Hot product causes burns. Low acute toxicity; mist inhalation and prolonged skin contact should be avoided.
Proprietà tipiche
- Aspetto
- Light yellow to amber, bright
- Densità a 15 °C
- 860 to 900 kg/m³
- Intervallo di ebollizione
- 300 to 600 °C
- Punto di infiammabilità
- SN 150 about 210 C; SN 500 about 240 C; bright stock about 290 C (open cup)
- Viscosità
- SN 150: about 30 mm2/s at 40 C; SN 500: about 100 mm2/s at 40 C; bright stock: about 30 mm2/s at 100 C
- Punto di scorrimento
- SN 150 about -9 C; SN 500 about -9 to -6 C; bright stock about -6 C to 0 C
- Zolfo tipico
- 0.03% to 1% (above 0.03% by definition)
◉What it is
Group I is the oldest and least refined API base oil category. It is made from vacuum distillates and deasphalted residue using solvents to remove aromatics and wax. API defines it as having less than 90 percent saturates and/or more than 0.03 percent sulphur, with a viscosity index of 80 to under 120 (Wikipedia). SN means solvent neutral, and the number is roughly the viscosity in Saybolt seconds at 100 F: SN 150 is a light grade, SN 500 a medium-heavy grade. Bright stock is the heaviest grade, made from deasphalted vacuum residue, with a viscosity of about 30 mm2/s at 100 C.
⬡What it is made of
C26 to C40 paraffins, naphthenes and aromatics (Wikipedia: 26 to 40 carbon fraction).
⚛La chimica
The oil contains branched and cyclic hydrocarbons. Remaining aromatics and sulphur compounds oxidise more easily than saturates, which limits oil life. Solvent refining removes polar aromatics, raising viscosity index.
⚙How it is made
Vacuum distillates are extracted with furfural or NMP to remove aromatics, dewaxed with MEK or toluene solvent, and finally hydrofinished. Bright stock comes from propane-deasphalted vacuum residue.
▶How it works
Base oil makes up 70 to 99 percent of a lubricant. Viscosity grade decides film thickness; viscosity index measures how little viscosity changes with temperature; saturates and low sulphur control oxidation stability.
▣Storage, loading and inspection
Store in clean, dry closed tanks away from heat. Keep different grades separate to avoid contamination. Sample per ASTM D4057; inspect colour, viscosity, flash point and water. Drums, IBCs and flexitanks are common packaging.
★Why it matters in the Gulf
Group I base oil supply is concentrated in a few regional lube plants and is shrinking worldwide as Group II and III grow. Gulf plant lists and volumes are not stated.
Molecole chiave
Norme e specifiche
| API 1509 Annex E | Defines base oil groups I to V |
|---|---|
| ASTM D445 | Kinematic viscosity |
| ASTM D2270 | Viscosity index |
Pericoli
Combustible at high temperature. Hot product causes burns. Low acute toxicity; mist inhalation and prolonged skin contact should be avoided.
Come si commercializza
Units
Metric tonnes; drums; flexitanks of 20 to 24 mt
Benchmarks
Platts Group I base oil assessments (SN 150, SN 500, bright stock) FOB Arab Gulf and Northwest Europe
Typical cargo
Parcels of 500 to 5,000 mt on small product tankers; containers
Incoterms
FOB, CFR, CIF; drums and ISO tanks FCA or DAP
Notes
Group I supply is shrinking as refiners shut solvent plants.
Raffinerie che lo producono: i nostri suggerimenti
38 raffinerie censite producono questo prodotto, 18 delle quali nel Golfo, in Iran e in Iraq. Diamo la precedenza agli impianti del Golfo, poi a quelli in esercizio, poi a quelli per capacità.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAccesso all'esportazione
- 2Daura Refinery
Iraq · 140,000 bpdGulf locationOperating
- 3Pearl GTL
Qatar · 140,000 bpdGulf locationOperatingAccesso all'esportazione
- 4Najaf Refinery
Iraq · 30,000 bpdGulf locationOperating
- 5Bahrain Lube Base Oil Plant (BLBOC)
Bahrain · 8,000 bpdGulf locationOperatingAccesso all'esportazione
- 6Sepahan Oil Company
Iran · Not publishedGulf locationOperatingAccesso all'esportazione
Terminal che lo movimentano
- Gulf Petrochem Hamriyah terminal
United Arab Emirates
- Regal Petro Trading terminal, Hamriyah
United Arab Emirates
- Sharafco Petroleum terminal, Hamriyah
United Arab Emirates
- Sharlu base oil terminal, Hamriyah
United Arab Emirates
Lo sapeva?
💡 Bright stock is the heaviest Group I grade and is used in gear oils and greases.
💡 Group I output is falling worldwide as Group II and III oils gain share.
Si metta alla prova su Base Oil Group I (SN 150, SN 500, Bright Stock)
What do Group I oils have by definition?
Altro in questo gruppo
Fonti
Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: medium. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.





