Passare al contenuto

Crude oils and condensates

Es Sider

Es Sider is Libya's main light crude export grade, about 36.2 degrees API and 0.38 percent sulphur in a 2018 assay.

← Tutti i prodottiDetto anche: Libyan Es Sider, Es Sider crude

  • Densità840 to 845 kg/m³
  • ZolfoAbout 0.38 % m/m (2018 assay)
  • PericoloUN1267, Class 3 (flammable liquid); packing group depends on flash point and initial boiling point
Colore tipico, vetro da laboratorio
Campione in vetro da laboratorio di Es Sider, nel suo colore tipico
Un campione di Es Sider in vetro da laboratorio su sfondo scuro da studio, per valutare facilmente il colore.
Fotografia di riferimento
Come Es Sider viene stoccato e movimentato nella pratica.

Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0. Fotografia: realizzata da una foto di riferimento di Glasbruch2007, CC BY-SA 3.0, tramite Wikimedia Commons.

Agitate il liquido per sentire quanto è denso

Muovete il mouse o un dito sul liquido. Premete e trascinate per agitare più forte. Tastiera: le frecce agitano, Spazio scuote.

Molto fluido
Il colore segue il colore tipico di Es Sider.
Fluido e scorrevoleDenso e pesante

Molto fluido Sottile come l'acqua o più. Le onde corrono veloci e durano a lungo.

Velocità di agitazione
0 px/s
Movimento del liquido
0%
Si calma dopo
-
Superficie
Fermo

La classe è solo una guida alla sensazione. Il valore di viscosità mostrato è quello dei dati di specifica.

Aspetto

Brown to black liquid

Dove si usa

  • Refinery feedstock for light products
  • Feed to Mediterranean refineries
  • Blending component

Manipolazione e sicurezza

  • Crude moves by pipeline to a terminal, is stored in floating-roof tanks and is loaded by loading arms or single point moorings onto tankers under inert gas. Independent inspectors sample under ASTM D4057 or API MPMS Chapter 8, measure water and sediment and quantity, and issue a quality and quantity certificate at loading.
  • UN 1267 is the shipping name 'Petroleum crude oil'. Vapours are heavier than air and may carry hydrogen sulphide and benzene; static ignition is a risk during loading, so tanks and decks need gas monitoring and inerting.

Proprietà tipiche

Aspetto
Brown to black liquid
Densità a 15 °C
840 to 845 kg/m³
Zolfo tipico
About 0.38 % m/m (2018 assay)

◉What it is

A named crude grade is a stream that is gathered, blended and delivered from a defined export point so that cargoes keep a consistent quality. A TotalEnergies assay dated 16 October 2018 lists Es Sider at 36.2 degrees API and 0.38 percent sulphur. The Sirte Basin accounts for about 90 percent of Libya's oil output, according to Wikipedia. The Es Sider terminal and export volumes are not confirmed in the sources used. The density range in the properties is derived from the API gravity range with the standard conversion (relative density = 141.5 / (API + 131.5)); it is a calculation, not a published density. Pour point, flash point, viscosity and boiling range are not published in the sources checked, so they are left blank rather than guessed.

⬡What it is made of

A medium-light, sweet crude. About 36 degrees API.

⚛La chimica

Crude oil is a continuous mixture of hydrocarbons: alkanes (paraffins), cycloalkanes (naphthenes) and aromatics such as benzene, plus heavy resins and asphaltenes. Sulphur sits mainly in thiols, sulphides and thiophenes and in dissolved hydrogen sulphide; the more of it a crude carries, the more hydrotreating a refinery needs to meet fuel sulphur limits. Lighter crudes contain a higher share of short, saturated chains that boil at low temperatures.

⚙How it is made

Produced in Libya's Sirte Basin; loading details are not confirmed.

▶How it works

API gravity is 141.5 divided by relative density at 60 F, minus 131.5, so a higher figure means a lighter crude. In a refinery the crude is first split in an atmospheric distillation unit and the cuts are upgraded in hydrotreaters, reformers and crackers. Pricing terms are not published in the sources checked.

▣Storage, loading and inspection

Crude moves by pipeline to a terminal, is stored in floating-roof tanks and is loaded by loading arms or single point moorings onto tankers under inert gas. Independent inspectors sample under ASTM D4057 or API MPMS Chapter 8, measure water and sediment and quantity, and issue a quality and quantity certificate at loading.

★Why it matters in the Gulf

No Gulf-specific claim is made.

Molecole chiave

Norme e specifiche

ASTM D4052 / ISO 12185Density by digital density meter, used to derive API gravity for cargo documents.
ASTM D4294 / ISO 8754Sulphur content by X-ray fluorescence.
ASTM D4057 / API MPMS Ch. 8.1Manual sampling of petroleum liquids for cargo quality determination.
ASTM D5853Pour point of crude oils; relevant to waxy grades.
Producer sales specificationA grade is sold against the producer's own assay and quality specification, not one public standard.

Pericoli

UN1267Classe Class 3 (flammable liquid); packing group depends on flash point and initial boiling point

UN 1267 is the shipping name 'Petroleum crude oil'. Vapours are heavier than air and may carry hydrogen sulphide and benzene; static ignition is a risk during loading, so tanks and decks need gas monitoring and inerting.

Come si commercializza

Units

Barrels (bbl); cargo sizes in thousand barrels; US dollars per barrel

Benchmarks

Not published in the sources checked

Typical cargo

VLCC about 2 million barrels, Suezmax about 1 million barrels, Aframax about 600,000 barrels (depends on terminal draft)

Incoterms

FOB at the loading terminal is common; CFR or CIF for delivered sales

Notes

Terms are not published in the sources checked.

Lo sapeva?

💡 The Sirte Basin holds about 80 percent of Libya's proven oil reserves.

Si metta alla prova su Es Sider

Domanda 1 di 3 · Punteggio 0 · Serie 0

What gravity does TotalEnergies' 2018 assay show for Es Sider?

Altro in questo gruppo

Fonti

Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: low. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.