Ir para o conteúdo

← Todos os processos

Vacuum distillation (VDU)

Refinery process

The vacuum unit takes the heavy atmospheric residue and distils it under strong vacuum so it can be separated without breaking down the molecules. It produces vacuum gas oils for cracking and a vacuum residue for coking, deasphalting or bitumen.

Carga de alimentação
Atmospheric residue from the CDU
Produz
Light vacuum gas oil, Heavy vacuum gas oil (VGO), Vacuum residue
Pressão
Operated under vacuum, far below atmospheric pressure
Catalisador
None (physical separation)

Fluxo do processo

O que faz

The residue from the crude unit boils at temperatures so high that heating it at normal pressure would crack it and foul equipment with coke. Lowering the pressure lowers boiling points, so the residue can be separated at moderate furnace temperatures. The feed is heated and enters a wide, low-pressure column, usually containing packing to keep pressure drop small. Light and heavy vacuum gas oils are drawn from the sides and become feed for the fluid catalytic cracker or hydrocracker. The bottom stream, vacuum residue, is the heaviest material in the refinery and may be sent to a coker, visbreaker, deasphalter or to bitumen production.

Passo a passo

  1. Atmospheric residue is heated in a vacuum furnace
  2. Steam is added in the furnace coils to limit coking
  3. The hot feed flashes in the vacuum column at very low pressure
  4. Ejectors or vacuum pumps hold the column pressure down
  5. Vapour rises through packed beds and condenses into side cuts
  6. Light and heavy vacuum gas oils are drawn off and cooled
  7. Vacuum residue leaves the bottom for upgrading or bitumen

A química

No chemical change is intended. Reduced pressure lowers boiling points, which lets heavy hydrocarbons vaporise below the temperature at which carbon-carbon bonds break. Any thermal cracking is an unwanted side effect because it makes gas and coke.

Equipamentos principais

  • Vacuum furnace
  • Large-diameter vacuum column with structured packing
  • Steam ejectors or liquid ring pumps
  • Condensers
  • Transfer line

Segurança

Air ingress into a hot vacuum system can cause fires, and very hot residue is a burn and fouling hazard. Equipment is large with tall columns.

Teste seus conhecimentos

Pergunta 1 de 3 · Pontuação 0 · Sequência 0

Why is residue distilled under vacuum?

Relacionados

Fontes

Redigido com as palavras da própria PST a partir das fontes acima. Confiabilidade dos dados: medium. As plantas reais diferem em projeto e condições de operação.