Ir para o conteúdo

Bitumen and solids

Polymer Modified Bitumen (PMB)

PMB is bitumen blended with polymers such as SBS to improve elasticity and temperature performance. It is used on heavy traffic roads and in roofing membranes.

← Todos os produtosTambém chamado de: PMB, SBS modified bitumen, PG 76-22, Modified binder

  • Ponto de fulgorTypically above 220 C (varies by grade)
  • Densidade1000 to 1040 kg/m³
  • ViscosidadeSoftening point at least 65 C for the PMB 45/80-65 grade
  • Enxofre1 to 6%
  • PerigoUN3257 for hot bitumen shipped as an elevated temperature liquid, Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)
Cor típica, vidro de laboratório
Amostra de Polymer Modified Bitumen (PMB) em vidro de laboratório, na cor típica
Uma amostra de Polymer Modified Bitumen (PMB) em vidro de laboratório sobre fundo escuro de estúdio, para facilitar a avaliação da cor.
Fotografia de referência
Como Polymer Modified Bitumen (PMB) é armazenado e movimentado na prática.

Créditos das imagens As amostras em vidro de laboratório foram feitas a partir de fotografias de referência da Wikimedia Commons por Chemik10 (CC BY-SA 2.5) e uma foto de amostra de petróleo em CC0.

Polymer Modified Bitumen (PMB) é sólido à temperatura normal, por isso não há líquido para agitar. Softening point at least 65 C for the PMB 45/80-65 grade

Aspecto esperado

Black

Onde é usado

  • Heavy traffic roads
  • Airports
  • Bridge decks
  • Roofing membranes

Manuseamento e segurança

  • Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing. PMB can separate if stored hot too long; keep stirred.
  • Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

Propriedades típicas

Aparência
Black
Densidade a 15 °C
1000 to 1040 kg/m³
Ponto de fulgor
Typically above 220 C (varies by grade)
Viscosidade
Softening point at least 65 C for the PMB 45/80-65 grade
Ponto de fluidez
Not applicable
Enxofre típico
1 to 6%

◉What it is

Polymer modified bitumen is conventional bitumen that has been blended with polymers. The most common is SBS (styrene-butadiene-styrene), which adds elasticity and resistance to rutting and cracking. Others are plastomers such as EVA and recycled rubber (Wikipedia mentions tyre rubber). PMB is graded by softening point, elastic recovery and penetration. It costs more than plain bitumen but extends pavement life.

⬡What it is made of

Bitumen plus 2 to 7% polymer; sometimes cross-linking agent such as sulphur.

⚛A química

SBS has hard polystyrene end blocks and soft polybutadiene mid blocks. In bitumen the blocks form a network that gives rubber-like elasticity.

⚙How it is made

Base bitumen is mixed with polymer in high shear mills at 170 to 190 C, then held for swelling.

▶How it works

The polymer network lets the binder stretch and recover, so pavement resists rutting in summer and cracking in winter.

▣Storage, loading and inspection

Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing. PMB can separate if stored hot too long; keep stirred.

★Why it matters in the Gulf

PMB is relevant for Gulf highways and airports where summer pavement temperatures are very high. Regional plant details are not stated.

Moléculas principais

Normas e especificações

EN 14023European framework specification for polymer modified bitumens.
AASHTO M 320 and M 332Performance-graded binder specifications, M 332 using the multiple stress creep recovery test.
ASTM D6373Performance-graded asphalt binder.

Riscos

UN3257 for hot bitumen shipped as an elevated temperature liquidClasse Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)

Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

Como é negociado

Units

Metric tonnes

Benchmarks

Contract price; premium over 60/70

Typical cargo

Tank truck, ISO tank, drums

Incoterms

DAP, FCA, FOB

Notes

Priced at a premium over plain bitumen; the premium varies by market.

Refinarias que o produzem: nossas sugestões

73 refinarias listadas produzem este produto, 22 delas no Golfo, no Irã e no Iraque. Ordenamos primeiro as unidades do Golfo, depois as em operação e, por fim, por capacidade.

Ver todos os 73 no mapa

Terminais que o movimentam

Você sabia

💡 SBS is the polymer most often used to modify bitumen.

💡 Polymer modification raises elasticity and resistance to rutting.

Teste seus conhecimentos sobre Polymer Modified Bitumen (PMB)

Pergunta 1 de 3 · Pontuação 0 · Sequência 0

Common polymer in PMB?

Mais neste grupo

Fontes

Redigido com as palavras da própria PST a partir das fontes acima. Confiabilidade dos dados: medium. Os valores típicos variam conforme a origem e o contrato, por isso leia sempre a especificação do seu próprio contrato.