跳至正文
登录申请报价

Lubricants and waxes

Base Oil Group I (SN 150, SN 500, Bright Stock)

Group I base oils are solvent-refined mineral oils with less than 90 percent saturates and/or more than 0.03 percent sulphur, and a viscosity index of 80 to under 120. SN 150, SN 500 and bright stock are common viscosity grades.

← 全部产品又称: Group I base oil, Solvent refined base oil, SN 150, SN 500, Bright stock, Solvent neutral

  • 闪点SN 150 about 210 C; SN 500 about 240 C; bright stock about 290 C (open cup)
  • 密度860 to 900 kg/m³
  • 黏度SN 150: about 30 mm2/s at 40 C; SN 500: about 100 mm2/s at 40 C; bright stock: about 30 mm2/s at 100 C
  • 冷流性SN 150 about -9 C; SN 500 about -9 to -6 C; bright stock about -6 C to 0 C
  • 硫0.03% to 1% (above 0.03% by definition)
  • 沸程300 to 600 °C
典型颜色,实验室玻璃
Base Oil Group I (SN 150, SN 500, Bright Stock) 的实验室玻璃样品,呈典型颜色
Base Oil Group I (SN 150, SN 500, Bright Stock) 的实验室玻璃样品,深色影棚背景,便于判断颜色。
参考照片
Base Oil Group I (SN 150, SN 500, Bright Stock) 在实际中如何储存和运输。

图片来源 实验室玻璃样品根据 Wikimedia Commons 上的参考照片制作,作者: Chemik10 (CC BY-SA 2.5) 以及一张 CC0 石油样品照片.

搅动液体,感受它有多稠

用鼠标或手指划过液体。按住并拖动可用力搅动。键盘:方向键搅动,空格键摇晃。

稠
颜色与 Base Oil Group I (SN 150, SN 500, Bright Stock) 的典型颜色一致。
稀而松散稠而重

稠 很重。搅动时阻力大,只能缓慢流动。

数据中的典型粘度SN 150: about 30 mm2/s at 40 C; SN 500: about 100 mm2/s at 40 C; bright stock: about 30 mm2/s at 100 C

搅动速度
0 像素/秒
液体运动
0%
静止所需时间
-
表面
静止

该等级仅供手感参考。所示粘度数值以规格数据为准。

外观

Light yellow to amber, bright

应用领域

  • Engine oils (older formulations)
  • Industrial and marine lubricants
  • Greases
  • Metalworking fluids
  • Rubber process oils

装卸与安全

  • Store in clean, dry closed tanks away from heat. Keep different grades separate to avoid contamination. Sample per ASTM D4057; inspect colour, viscosity, flash point and water. Drums, IBCs and flexitanks are common packaging.
  • Combustible at high temperature. Hot product causes burns. Low acute toxicity; mist inhalation and prolonged skin contact should be avoided.

典型性质

外观
Light yellow to amber, bright
15 °C 密度
860 to 900 kg/m³
沸程
300 to 600 °C
闪点
SN 150 about 210 C; SN 500 about 240 C; bright stock about 290 C (open cup)
黏度
SN 150: about 30 mm2/s at 40 C; SN 500: about 100 mm2/s at 40 C; bright stock: about 30 mm2/s at 100 C
倾点
SN 150 about -9 C; SN 500 about -9 to -6 C; bright stock about -6 C to 0 C
典型含硫量
0.03% to 1% (above 0.03% by definition)

◉What it is

Group I is the oldest and least refined API base oil category. It is made from vacuum distillates and deasphalted residue using solvents to remove aromatics and wax. API defines it as having less than 90 percent saturates and/or more than 0.03 percent sulphur, with a viscosity index of 80 to under 120 (Wikipedia). SN means solvent neutral, and the number is roughly the viscosity in Saybolt seconds at 100 F: SN 150 is a light grade, SN 500 a medium-heavy grade. Bright stock is the heaviest grade, made from deasphalted vacuum residue, with a viscosity of about 30 mm2/s at 100 C.

⬡What it is made of

C26 to C40 paraffins, naphthenes and aromatics (Wikipedia: 26 to 40 carbon fraction).

⚛化学成分

The oil contains branched and cyclic hydrocarbons. Remaining aromatics and sulphur compounds oxidise more easily than saturates, which limits oil life. Solvent refining removes polar aromatics, raising viscosity index.

⚙How it is made

Vacuum distillates are extracted with furfural or NMP to remove aromatics, dewaxed with MEK or toluene solvent, and finally hydrofinished. Bright stock comes from propane-deasphalted vacuum residue.

▶How it works

Base oil makes up 70 to 99 percent of a lubricant. Viscosity grade decides film thickness; viscosity index measures how little viscosity changes with temperature; saturates and low sulphur control oxidation stability.

▣Storage, loading and inspection

Store in clean, dry closed tanks away from heat. Keep different grades separate to avoid contamination. Sample per ASTM D4057; inspect colour, viscosity, flash point and water. Drums, IBCs and flexitanks are common packaging.

★Why it matters in the Gulf

Group I base oil supply is concentrated in a few regional lube plants and is shrinking worldwide as Group II and III grow. Gulf plant lists and volumes are not stated.

主要分子

标准与规格

API 1509 Annex EDefines base oil groups I to V
ASTM D445Kinematic viscosity
ASTM D2270Viscosity index

危害

Not regulated船型级别 Not classified as dangerous goods for transport

Combustible at high temperature. Hot product causes burns. Low acute toxicity; mist inhalation and prolonged skin contact should be avoided.

交易方式

Units

Metric tonnes; drums; flexitanks of 20 to 24 mt

Benchmarks

Platts Group I base oil assessments (SN 150, SN 500, bright stock) FOB Arab Gulf and Northwest Europe

Typical cargo

Parcels of 500 to 5,000 mt on small product tankers; containers

Incoterms

FOB, CFR, CIF; drums and ISO tanks FCA or DAP

Notes

Group I supply is shrinking as refiners shut solvent plants.

可生产此产品的炼厂:我们的推荐

已收录 38 家炼厂生产此产品,其中 18 家位于海湾、伊朗和伊拉克。我们按以下顺序排列:海湾工厂优先,其次是在产工厂,再按产能。

在地图上查看全部 38 个

可处理该产品的码头

你知道吗

💡 Bright stock is the heaviest Group I grade and is used in gear oils and greases.

💡 Group I output is falling worldwide as Group II and III oils gain share.

测验您对 Base Oil Group I (SN 150, SN 500, Bright Stock) 的掌握

第 1 题,共 3 题 · 得分 0 · 连对 0

What do Group I oils have by definition?

该组更多内容

来源

由 PST 依据上述来源自行撰写。数据可信度:medium。典型值因产地和合同而异,请务必以您自己合同中的规格为准。