跳至正文
登录申请报价

Lubricants and waxes

Base Oil Group II

Group II base oils are hydroprocessed mineral oils with at least 90 percent saturates and sulphur at or below 0.03 percent. They are the main base stock for modern engine oils.

← 全部产品又称: Group II base oil, Hydroprocessed base oil

  • 闪点200 to 250 C typical (open cup)
  • 密度840 to 870 kg/m³
  • 黏度About 4 to 10 mm2/s at 100 C depending on grade
  • 冷流性-12 to -18 C typical
  • 硫Less than 0.03% (often below 10 ppm)
  • 沸程300 to 550 °C
典型颜色,实验室玻璃
Base Oil Group II 的实验室玻璃样品,呈典型颜色
Base Oil Group II 的实验室玻璃样品,深色影棚背景,便于判断颜色。
参考照片
Base Oil Group II 在实际中如何储存和运输。

图片来源 实验室玻璃样品根据 Wikimedia Commons 上的参考照片制作,作者: Chemik10 (CC BY-SA 2.5) 以及一张 CC0 石油样品照片.

搅动液体,感受它有多稠

用鼠标或手指划过液体。按住并拖动可用力搅动。键盘:方向键搅动,空格键摇晃。

稠
颜色与 Base Oil Group II 的典型颜色一致。
稀而松散稠而重

稠 很重。搅动时阻力大,只能缓慢流动。

数据中的典型粘度About 4 to 10 mm2/s at 100 C depending on grade

搅动速度
0 像素/秒
液体运动
0%
静止所需时间
-
表面
静止

该等级仅供手感参考。所示粘度数值以规格数据为准。

外观

Water-white to pale yellow

应用领域

  • Engine oils (SAE 5W-30, 10W-40)
  • Hydraulic and turbine oils
  • Gear oils
  • Transformer oils

装卸与安全

  • Store in clean, dry closed tanks away from heat. Keep different grades separate to avoid contamination. Sample per ASTM D4057; inspect colour, viscosity, flash point and water. Drums, IBCs and flexitanks are common packaging.
  • Combustible at high temperature. Hot product causes burns. Low acute toxicity; mist inhalation and prolonged skin contact should be avoided.

典型性质

外观
Water-white to pale yellow
15 °C 密度
840 to 870 kg/m³
沸程
300 to 550 °C
闪点
200 to 250 C typical (open cup)
黏度
About 4 to 10 mm2/s at 100 C depending on grade
倾点
-12 to -18 C typical
典型含硫量
Less than 0.03% (often below 10 ppm)

◉What it is

Group II oils have at least 90 percent saturates and no more than 0.03 percent sulphur, with a viscosity index of 80 to under 120 (Wikipedia). They are made by hydroprocessing rather than solvent extraction, so they are clearer, more stable and more consistent than Group I. Group II is widely used for passenger car and heavy-duty engine oils. Viscosity grades are given in cSt at 100 C or by Neutral numbers such as N 100, N 150 or N 600.

⬡What it is made of

C20 to C40 saturated paraffins and naphthenes.

⚛化学成分

Hydrogenation saturates aromatic rings and removes sulphur and nitrogen, leaving cycloalkanes and isoparaffins. Branched isoparaffins give low pour point and good viscosity index; saturated structure improves oxidation stability.

⚙How it is made

Vacuum gasoil is hydrocracked or severely hydrotreated vacuum distillate, then catalytically dewaxed.

▶How it works

Base oil forms the bulk of the lubricant and provides film thickness, heat transfer and solvency for additives. Higher saturates and viscosity index give longer drain intervals.

▣Storage, loading and inspection

Store in clean, dry closed tanks away from heat. Keep different grades separate to avoid contamination. Sample per ASTM D4057; inspect colour, viscosity, flash point and water. Drums, IBCs and flexitanks are common packaging.

★Why it matters in the Gulf

Group II and III base oils are traded into the region for lubricant blending, including blending plants at Jebel Ali. Gulf production plants are not stated.

主要分子

标准与规格

API 1509Group classification
ASTM D445 and D2270Viscosity and VI
ACEA and ILSACEngine oil standards that drive demand

危害

Not regulated船型级别 Not classified as dangerous goods for transport

Combustible at high temperature. Hot product causes burns. Low acute toxicity; mist inhalation and prolonged skin contact should be avoided.

交易方式

Units

Metric tonnes; drums; flexitanks

Benchmarks

Platts Group II and III base oil assessments FOB Arab Gulf, Asia and Europe

Typical cargo

Parcels of 1,000 to 10,000 mt; containerised lots

Incoterms

FOB, CFR, CIF; drums and ISO tanks FCA or DAP

Notes

Group III is also called VHVI or hydrocracked base oil.

可生产此产品的炼厂:我们的推荐

已收录 38 家炼厂生产此产品,其中 18 家位于海湾、伊朗和伊拉克。我们按以下顺序排列:海湾工厂优先,其次是在产工厂,再按产能。

在地图上查看全部 38 个

可处理该产品的码头

你知道吗

💡 Group III is marketed by some blenders as synthetic technology although it is mineral-based.

💡 The shift to low-viscosity engine oils drives growth in Group II and III.

测验您对 Base Oil Group II 的掌握

第 1 题,共 3 题 · 得分 0 · 连对 0

What is the VI of Group II?

该组更多内容

来源

由 PST 依据上述来源自行撰写。数据可信度:medium。典型值因产地和合同而异,请务必以您自己合同中的规格为准。