انتقل إلى المحتوى
تسجيل الدخولاطلب عرضاً

Lubricants and waxes

Base Oil Group II

Group II base oils are hydroprocessed mineral oils with at least 90 percent saturates and sulphur at or below 0.03 percent. They are the main base stock for modern engine oils.

← كل المنتجاتيُسمى أيضاً: Group II base oil, Hydroprocessed base oil

  • نقطة الوميض200 to 250 C typical (open cup)
  • الكثافة840 to 870 kg/m³
  • اللزوجةAbout 4 to 10 mm2/s at 100 C depending on grade
  • الانسياب على البارد-12 to -18 C typical
  • الكبريتLess than 0.03% (often below 10 ppm)
  • مدى الغليان300 to 550 °C
اللون المعتاد، زجاج مختبري
عينة مخبرية زجاجية من Base Oil Group II بلونها المعتاد
عينة من Base Oil Group II في زجاج مختبري على خلفية استوديو داكنة، ليسهل الحكم على اللون.
صورة مرجعية
كيف يُخزَّن Base Oil Group II وينقل عمليا.

حقوق الصور عينات الزجاج المختبري مصنوعة من صور مرجعية على ويكيميديا كومنز بواسطة Chemik10 (CC BY-SA 2.5) وصورة عينة بترولية بترخيص CC0.

حرّك السائل لتحس بمدى لزوجته

حرّك الفأرة أو إصبعك فوق السائل. اضغط واسحب للتحريك بقوة أكبر. لوحة المفاتيح: الأسهم للتحريك، المسافة للرج.

لزج
اللون يتبع اللون المعتاد لـ Base Oil Group II.
رقيق وسائبلزج وثقيل

لزج ثقيل. يقاوم التحريك ولا يتحرك إلا ببطء.

اللزوجة المعتادة من البياناتAbout 4 to 10 mm2/s at 100 C depending on grade

سرعة التحريك
0 بكسل/ث
حركة السائل
0%
يستقر بعد
-
السطح
ساكن

الفئة دليل تقريبي للإحساس. رقم اللزوجة المعروض هو الوارد في بيانات المواصفات.

مظهره

Water-white to pale yellow

أين يُستخدم

  • Engine oils (SAE 5W-30, 10W-40)
  • Hydraulic and turbine oils
  • Gear oils
  • Transformer oils

المناولة والسلامة

  • Store in clean, dry closed tanks away from heat. Keep different grades separate to avoid contamination. Sample per ASTM D4057; inspect colour, viscosity, flash point and water. Drums, IBCs and flexitanks are common packaging.
  • Combustible at high temperature. Hot product causes burns. Low acute toxicity; mist inhalation and prolonged skin contact should be avoided.

الخصائص المعتادة

المظهر
Water-white to pale yellow
الكثافة عند 15 °C
840 to 870 kg/m³
مدى الغليان
300 to 550 °C
نقطة الوميض
200 to 250 C typical (open cup)
اللزوجة
About 4 to 10 mm2/s at 100 C depending on grade
نقطة الانسكاب
-12 to -18 C typical
الكبريت المعتاد
Less than 0.03% (often below 10 ppm)

◉What it is

Group II oils have at least 90 percent saturates and no more than 0.03 percent sulphur, with a viscosity index of 80 to under 120 (Wikipedia). They are made by hydroprocessing rather than solvent extraction, so they are clearer, more stable and more consistent than Group I. Group II is widely used for passenger car and heavy-duty engine oils. Viscosity grades are given in cSt at 100 C or by Neutral numbers such as N 100, N 150 or N 600.

⬡What it is made of

C20 to C40 saturated paraffins and naphthenes.

⚛الكيمياء

Hydrogenation saturates aromatic rings and removes sulphur and nitrogen, leaving cycloalkanes and isoparaffins. Branched isoparaffins give low pour point and good viscosity index; saturated structure improves oxidation stability.

⚙How it is made

Vacuum gasoil is hydrocracked or severely hydrotreated vacuum distillate, then catalytically dewaxed.

▶How it works

Base oil forms the bulk of the lubricant and provides film thickness, heat transfer and solvency for additives. Higher saturates and viscosity index give longer drain intervals.

▣Storage, loading and inspection

Store in clean, dry closed tanks away from heat. Keep different grades separate to avoid contamination. Sample per ASTM D4057; inspect colour, viscosity, flash point and water. Drums, IBCs and flexitanks are common packaging.

★Why it matters in the Gulf

Group II and III base oils are traded into the region for lubricant blending, including blending plants at Jebel Ali. Gulf production plants are not stated.

الجزيئات الرئيسية

المعايير والمواصفات

API 1509Group classification
ASTM D445 and D2270Viscosity and VI
ACEA and ILSACEngine oil standards that drive demand

المخاطر

Not regulatedالفئة Not classified as dangerous goods for transport

Combustible at high temperature. Hot product causes burns. Low acute toxicity; mist inhalation and prolonged skin contact should be avoided.

كيف يُتداول

Units

Metric tonnes; drums; flexitanks

Benchmarks

Platts Group II and III base oil assessments FOB Arab Gulf, Asia and Europe

Typical cargo

Parcels of 1,000 to 10,000 mt; containerised lots

Incoterms

FOB, CFR, CIF; drums and ISO tanks FCA or DAP

Notes

Group III is also called VHVI or hydrocracked base oil.

المصافي التي تنتجه: ترشيحاتنا

38 من المصافي المدرجة تنتج هذا المنتج، منها 18 في الخليج وإيران والعراق. نرتّب مصانع الخليج أولاً، ثم المصانع العاملة، ثم بحسب الطاقة.

شاهد كل 38 على الخريطة

المحطات التي تتعامل معه

هل تعلم

💡 Group III is marketed by some blenders as synthetic technology although it is mineral-based.

💡 The shift to low-viscosity engine oils drives growth in Group II and III.

اختبر نفسك في Base Oil Group II

السؤال 1 من 3 · النتيجة 0 · السلسلة 0

What is the VI of Group II?

المزيد في هذه المجموعة

المصادر

كُتب بأسلوب PST من المصادر أعلاه. الثقة في البيانات: medium. تختلف القيم المعتادة بحسب المنشأ والعقد، فاقرأ دائماً المواصفات الواردة في عقدك.