Lubricants and waxes
Base Oil Group III
Group III base oils are hydroprocessed mineral oils with at least 90 percent saturates and sulphur at or below 0.03 percent. They are the main base stock for modern engine oils.
← كل المنتجاتيُسمى أيضاً: Group III base oil, Hydroprocessed base oil
- نقطة الوميض200 to 250 C typical (open cup)
- الكثافة840 to 870 kg/m³
- اللزوجةAbout 4 to 10 mm2/s at 100 C depending on grade
- الانسياب على البارد-12 to -18 C typical
- الكبريتLess than 0.03% (often below 10 ppm)
- مدى الغليان300 to 550 °C


حقوق الصور عينات الزجاج المختبري مصنوعة من صور مرجعية على ويكيميديا كومنز بواسطة Chemik10 (CC BY-SA 2.5) وصورة عينة بترولية بترخيص CC0.
حرّك السائل لتحس بمدى لزوجته
حرّك الفأرة أو إصبعك فوق السائل. اضغط واسحب للتحريك بقوة أكبر. لوحة المفاتيح: الأسهم للتحريك، المسافة للرج.
لزج ثقيل. يقاوم التحريك ولا يتحرك إلا ببطء.
اللزوجة المعتادة من البياناتAbout 4 to 10 mm2/s at 100 C depending on grade
- سرعة التحريك
- 0 بكسل/ث
- حركة السائل
- 0%
- يستقر بعد
- -
- السطح
- ساكن
الفئة دليل تقريبي للإحساس. رقم اللزوجة المعروض هو الوارد في بيانات المواصفات.
مظهره
Water-white to pale yellow
أين يُستخدم
- Engine oils (SAE 5W-30, 10W-40)
- Hydraulic and turbine oils
- Gear oils
- Transformer oils
المناولة والسلامة
- Store in clean, dry closed tanks away from heat. Keep different grades separate to avoid contamination. Sample per ASTM D4057; inspect colour, viscosity, flash point and water. Drums, IBCs and flexitanks are common packaging.
- Combustible at high temperature. Hot product causes burns. Low acute toxicity; mist inhalation and prolonged skin contact should be avoided.
الخصائص المعتادة
- المظهر
- Water-white to pale yellow
- الكثافة عند 15 °C
- 840 to 870 kg/m³
- مدى الغليان
- 300 to 550 °C
- نقطة الوميض
- 200 to 250 C typical (open cup)
- اللزوجة
- About 4 to 10 mm2/s at 100 C depending on grade
- نقطة الانسكاب
- -12 to -18 C typical
- الكبريت المعتاد
- Less than 0.03% (often below 10 ppm)
◉What it is
Group III oils have at least 90 percent saturates, no more than 0.03 percent sulphur and a viscosity index of at least 120 (Wikipedia). They are made by hydroprocessing rather than solvent extraction, so they are clearer, more stable and more consistent than Group I. Group III is widely used for passenger car and heavy-duty engine oils. Viscosity grades are given in cSt at 100 C or by Neutral numbers such as N 100, N 150 or N 600.
⬡What it is made of
C20 to C40 saturated paraffins and naphthenes.
⚛الكيمياء
Hydrogenation saturates aromatic rings and removes sulphur and nitrogen, leaving cycloalkanes and isoparaffins. Branched isoparaffins give low pour point and good viscosity index; saturated structure improves oxidation stability.
⚙How it is made
Vacuum gasoil is hydrocracked and hydroisomerised vacuum distillate, with VI raised by isomerising wax.
▶How it works
Base oil forms the bulk of the lubricant and provides film thickness, heat transfer and solvency for additives. Higher saturates and viscosity index give longer drain intervals.
▣Storage, loading and inspection
Store in clean, dry closed tanks away from heat. Keep different grades separate to avoid contamination. Sample per ASTM D4057; inspect colour, viscosity, flash point and water. Drums, IBCs and flexitanks are common packaging.
★Why it matters in the Gulf
Group II and III base oils are traded into the region for lubricant blending, including blending plants at Jebel Ali. Gulf production plants are not stated.
الجزيئات الرئيسية
المعايير والمواصفات
| API 1509 | Group classification |
|---|---|
| ASTM D445 and D2270 | Viscosity and VI |
| ACEA and ILSAC | Engine oil standards that drive demand |
المخاطر
Combustible at high temperature. Hot product causes burns. Low acute toxicity; mist inhalation and prolonged skin contact should be avoided.
كيف يُتداول
Units
Metric tonnes; drums; flexitanks
Benchmarks
Platts Group II and III base oil assessments FOB Arab Gulf, Asia and Europe
Typical cargo
Parcels of 1,000 to 10,000 mt; containerised lots
Incoterms
FOB, CFR, CIF; drums and ISO tanks FCA or DAP
Notes
Group III is also called VHVI or hydrocracked base oil.
المصافي التي تنتجه: ترشيحاتنا
38 من المصافي المدرجة تنتج هذا المنتج، منها 18 في الخليج وإيران والعراق. نرتّب مصانع الخليج أولاً، ثم المصانع العاملة، ثم بحسب الطاقة.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionإمكانية التصدير
- 2Daura Refinery
Iraq · 140,000 bpdGulf locationOperating
- 3Pearl GTL
Qatar · 140,000 bpdGulf locationOperatingإمكانية التصدير
- 4Najaf Refinery
Iraq · 30,000 bpdGulf locationOperating
- 5Bahrain Lube Base Oil Plant (BLBOC)
Bahrain · 8,000 bpdGulf locationOperatingإمكانية التصدير
- 6Sepahan Oil Company
Iran · Not publishedGulf locationOperatingإمكانية التصدير
المحطات التي تتعامل معه
- Gulf Petrochem Hamriyah terminal
United Arab Emirates
- Regal Petro Trading terminal, Hamriyah
United Arab Emirates
- Sharafco Petroleum terminal, Hamriyah
United Arab Emirates
- Sharlu base oil terminal, Hamriyah
United Arab Emirates
هل تعلم
💡 Group III is marketed by some blenders as synthetic technology although it is mineral-based.
💡 Group III oils are fully produced by hydrocracking, hydroisomerisation and hydrotreating (Wikipedia).
اختبر نفسك في Base Oil Group III
What is the VI of Group III?
المزيد في هذه المجموعة
- Base Oil Group I (SN 150, SN 500, Bright Stock)
- Base Oil Group II
- White Oil (Medicinal and Technical)
- Paraffin Wax
- Slack Wax
المصادر
كُتب بأسلوب PST من المصادر أعلاه. الثقة في البيانات: medium. تختلف القيم المعتادة بحسب المنشأ والعقد، فاقرأ دائماً المواصفات الواردة في عقدك.





