Skip to content

← All processes

Refinery complexity (Nelson index) and configurations

Refinery process

The Nelson complexity index measures how much conversion capacity a refinery has compared with its crude distillation. Configurations range from simple hydroskimming to cracking and coking refineries.

Feed
Not applicable (an index, not a unit)
Makes
A complexity number for a refinery, Product slate range from simple to deep conversion

Process flow

What it does

Crude distillation is assigned a factor of 1.0. Each other unit has a factor reflecting its cost relative to crude distillation, and the unit's throughput as a fraction of crude capacity is multiplied by the factor. The sum is the Nelson index. Typical factors include vacuum distillation at 2.0, catalytic reforming at 5.0, catalytic cracking and hydrocracking at 6.0 and alkylation at 10.0. A hydroskimming refinery has distillation, reforming and treating, so produces mostly gasoline and a lot of fuel oil. A cracking refinery adds an FCC or hydrocracker to turn gas oil into light products. A coking refinery also converts residue, giving the highest yield of clean products.

Step by step

  1. Crude distillation capacity is set as the base (factor 1.0)
  2. Each unit capacity is divided by crude capacity
  3. Each ratio is multiplied by the unit's complexity factor
  4. The terms are summed to give the index
  5. Hydroskimming has low index and large fuel oil output
  6. Cracking adds FCC or hydrocracking
  7. Coking or residue upgrading gives the highest complexity

The chemistry

The index is not chemistry. It is an accounting method. The example in the source: a 100 kb/d crude unit, a 60 kb/d vacuum unit and a 30 kb/d reformer gives 1.0 plus 1.2 plus 1.5, or 3.7.

Main equipment

  • All units of the refinery are scored by capacity

In the Gulf

Kuwait's Al-Zour refinery had a planned capacity of 615,000 barrels per day, with the first phase commissioned in January 2023, and Ras Tanura in Saudi Arabia has 550,000 barrels per day of crude capacity. Ruwais in Abu Dhabi, with a residue FCC and a delayed coker, is an example of a deep-conversion plant. The Nelson indices of these specific refineries are not stated.

Test yourself

Question 1 of 3 · Score 0 · Streak 0

What is the complexity factor of crude distillation?

Related

Sources

Written in PST's own words from the sources above. Confidence in the data: high. Real plants differ in design and operating conditions.