پرش به محتوا

Bitumen and solids

Bitumen 40/50, 60/70 and 80/100 (Paving Grades)

Paving grade bitumen is a black, sticky binder graded by how deep a standard needle sinks into it. In the EN 12591 range the grades run from 35/50 (hardest) to 160/220 (softest), and other standards also use grades such as 60/70 and 80/100.

← همهٔ محصولاتنام‌های دیگر: Penetration grade bitumen, Asphalt cement, Bitumen 60/70, Bitumen 80/100, Bitumen 40/50, Asphalt binder

  • نقطهٔ اشتعالAbove about 230 C (Cleveland open cup) for most grades
  • چگالی1000 to 1060 kg/m³
  • گرانرویGraded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade
  • گوگرد1 to 6% depending on crude
  • خطرUN3257 for hot bitumen shipped as an elevated temperature liquid, Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)
رنگ معمول، ظرف شیشه‌ای آزمایشگاهی
نمونهٔ Bitumen 40/50, 60/70 and 80/100 (Paving Grades) در شیشهٔ آزمایشگاهی، با رنگ معمول آن
نمونه‌ای از Bitumen 40/50, 60/70 and 80/100 (Paving Grades) در ظرف شیشه‌ای آزمایشگاهی روی پس‌زمینه تیره استودیویی، تا رنگ آن به‌راحتی قابل ارزیابی باشد.
عکس مرجع
نحوه نگهداری و جابه‌جایی Bitumen 40/50, 60/70 and 80/100 (Paving Grades) در عمل.

منبع تصاویر نمونه‌های شیشه‌ای آزمایشگاهی از روی عکس‌های مرجع در ویکی‌مدیا کامنز ساخته شده‌اند، اثر Chemik10 (CC BY-SA 2.5) و یک عکس نمونهٔ نفتی با مجوز CC0.

مایع را هم بزنید تا غلظت آن را حس کنید

ماوس یا انگشت را روی مایع حرکت دهید. برای هم‌زدن شدیدتر، فشار دهید و بکشید. صفحه‌کلید: کلیدهای جهت‌دار هم می‌زنند و Space تکان می‌دهد.

نیمه‌جامد
رنگ بر اساس رنگ معمول Bitumen 40/50, 60/70 and 80/100 (Paving Grades) است.
رقیق و روانغلیظ و سنگین

نیمه‌جامد در دمای عادی نیمه‌جامد است. فقط آهسته می‌خزد و برای پمپ شدن باید گرم شود.

گرانروی معمول بر اساس داده‌هاGraded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade

سرعت هم‌زدن
0 px/s
حرکت مایع
0%
آرام‌گرفتن پس از
-
سطح
ساکن

این رده فقط راهنمای حس مایع است. عدد گرانروی نمایش‌داده‌شده همان است که در داده‌های مشخصات آمده.

ظاهر محصول

Black, glossy at hot, brittle when cold

کاربردها

  • Road paving
  • Airport runways
  • Roofing and waterproofing
  • Hot-mix asphalt in ports and car parks

جابه‌جایی و ایمنی

  • Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing.
  • Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

ویژگی‌های معمول

ظاهر
Black, glossy at hot, brittle when cold
چگالی در 15 °C
1000 to 1060 kg/m³
نقطهٔ اشتعال
Above about 230 C (Cleveland open cup) for most grades
گرانروی
Graded by penetration at 25 C; softening point roughly 45 to 58 C depending on grade
نقطهٔ ریزش
Not applicable
گوگرد معمول
1 to 6% depending on crude

◉What it is

Bitumen is the heavy residue of crude distillation. Wikipedia describes it as the heavy fraction boiling above about 500 C after vacuum distillation. Paving grades are defined by penetration at 25 C in tenths of a millimetre: 40/50 means 40 to 50 units. Hard grades such as 40/50 resist rutting in hot climates and heavy traffic, while softer grades like 80/100 resist cracking in cold climates. It is stored and moved at about 150 C.

⬡What it is made of

C40+ asphaltenes, resins, saturates and aromatics; sulphur 1 to 6%.

⚛شیمی

Bitumen is a colloidal system: asphaltene clusters dispersed in an oily maltene phase of resins, aromatics and saturates. The ratio decides stiffness. More asphaltenes make a harder bitumen.

⚙How it is made

Vacuum distillation residue from suitable crude oils (such as heavy Middle East crudes) is the base. Air blowing or blending of hard and soft components adjusts penetration.

▶How it works

Penetration (ASTM D5, EN 1426), softening point (ASTM D36, EN 1427) and viscosity are used to measure stiffness. It binds aggregate in asphalt concrete, becoming fluid at 150 C and solid at ambient temperature.

▣Storage, loading and inspection

Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing.

★Why it matters in the Gulf

The GCC consumes large volumes of bitumen in road and airport projects, and Gulf and Iranian bitumen is traded to Central Asia and East Africa. Refinery-by-refinery supply and export volumes are not stated.

مولکول‌های کلیدی

استانداردها و مشخصات

EN 12591European specification for paving grade bitumens (penetration grades).
ASTM D946US penetration-graded asphalt cement.
ASTM D3381Viscosity-graded asphalt cement.
AASHTO M 320Performance-graded asphalt binder.

خطرات

UN3257 for hot bitumen shipped as an elevated temperature liquidکلاس Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)

Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

نحوهٔ معامله

Units

Metric tonnes

Benchmarks

Contract-based; price tracks crude oil and fuel oil; no futures

Typical cargo

Bulk bitumen vessels 3,000 to 20,000 mt; ISO tanks; drums

Incoterms

FOB, CFR, CIF bulk; ISO tank FCA

Notes

Penetration grades such as 60/70 are common export trade grades. Origin and volume data are not stated.

پالایشگاه‌هایی که آن را تولید می‌کنند: پیشنهاد ما

54 پالایشگاه فهرست‌شده این محصول را تولید می‌کنند که 17 تا از آن‌ها در خلیج فارس، ایران و عراق است. پالایشگاه‌های خلیج فارس را اول می‌آوریم، سپس واحدهای در حال بهره‌برداری، و بعد بر اساس ظرفیت.

دیدن هر 54 مورد روی نقشه

ترمینال‌هایی که آن را جابه‌جا می‌کنند

می‌دانستید؟

💡 In American usage asphalt means bitumen, and asphalt concrete is the paving mix with stone (Wikipedia).

💡 Natural bitumen from the Dead Sea was used by the Egyptians for embalming (Wikipedia).

خودتان را در مورد Bitumen 40/50, 60/70 and 80/100 (Paving Grades) بسنجید

پرسش 1 از 3 · امتیاز 0 · رکورد پیاپی 0

What does 60/70 mean?

موارد بیشتر در این گروه

منابع

با بیان خود PST و بر پایهٔ منابع بالا نوشته شده است. اطمینان از داده: medium. مقادیر معمول بسته به مبدأ و قرارداد فرق می‌کند، پس مشخصات را همیشه در قرارداد خودتان بخوانید.