پرش به محتوا

Bitumen and solids

Polymer Modified Bitumen (PMB)

PMB is bitumen blended with polymers such as SBS to improve elasticity and temperature performance. It is used on heavy traffic roads and in roofing membranes.

← همهٔ محصولاتنام‌های دیگر: PMB, SBS modified bitumen, PG 76-22, Modified binder

  • نقطهٔ اشتعالTypically above 220 C (varies by grade)
  • چگالی1000 to 1040 kg/m³
  • گرانرویSoftening point at least 65 C for the PMB 45/80-65 grade
  • گوگرد1 to 6%
  • خطرUN3257 for hot bitumen shipped as an elevated temperature liquid, Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)
رنگ معمول، ظرف شیشه‌ای آزمایشگاهی
نمونهٔ Polymer Modified Bitumen (PMB) در شیشهٔ آزمایشگاهی، با رنگ معمول آن
نمونه‌ای از Polymer Modified Bitumen (PMB) در ظرف شیشه‌ای آزمایشگاهی روی پس‌زمینه تیره استودیویی، تا رنگ آن به‌راحتی قابل ارزیابی باشد.
عکس مرجع
نحوه نگهداری و جابه‌جایی Polymer Modified Bitumen (PMB) در عمل.

منبع تصاویر نمونه‌های شیشه‌ای آزمایشگاهی از روی عکس‌های مرجع در ویکی‌مدیا کامنز ساخته شده‌اند، اثر Chemik10 (CC BY-SA 2.5) و یک عکس نمونهٔ نفتی با مجوز CC0.

Polymer Modified Bitumen (PMB) در دمای عادی جامد است، بنابراین مایعی برای هم‌زدن وجود ندارد. Softening point at least 65 C for the PMB 45/80-65 grade

ظاهر محصول

Black

کاربردها

  • Heavy traffic roads
  • Airports
  • Bridge decks
  • Roofing membranes

جابه‌جایی و ایمنی

  • Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing. PMB can separate if stored hot too long; keep stirred.
  • Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

ویژگی‌های معمول

ظاهر
Black
چگالی در 15 °C
1000 to 1040 kg/m³
نقطهٔ اشتعال
Typically above 220 C (varies by grade)
گرانروی
Softening point at least 65 C for the PMB 45/80-65 grade
نقطهٔ ریزش
Not applicable
گوگرد معمول
1 to 6%

◉What it is

Polymer modified bitumen is conventional bitumen that has been blended with polymers. The most common is SBS (styrene-butadiene-styrene), which adds elasticity and resistance to rutting and cracking. Others are plastomers such as EVA and recycled rubber (Wikipedia mentions tyre rubber). PMB is graded by softening point, elastic recovery and penetration. It costs more than plain bitumen but extends pavement life.

⬡What it is made of

Bitumen plus 2 to 7% polymer; sometimes cross-linking agent such as sulphur.

⚛شیمی

SBS has hard polystyrene end blocks and soft polybutadiene mid blocks. In bitumen the blocks form a network that gives rubber-like elasticity.

⚙How it is made

Base bitumen is mixed with polymer in high shear mills at 170 to 190 C, then held for swelling.

▶How it works

The polymer network lets the binder stretch and recover, so pavement resists rutting in summer and cracking in winter.

▣Storage, loading and inspection

Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing. PMB can separate if stored hot too long; keep stirred.

★Why it matters in the Gulf

PMB is relevant for Gulf highways and airports where summer pavement temperatures are very high. Regional plant details are not stated.

مولکول‌های کلیدی

استانداردها و مشخصات

EN 14023European framework specification for polymer modified bitumens.
AASHTO M 320 and M 332Performance-graded binder specifications, M 332 using the multiple stress creep recovery test.
ASTM D6373Performance-graded asphalt binder.

خطرات

UN3257 for hot bitumen shipped as an elevated temperature liquidکلاس Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)

Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

نحوهٔ معامله

Units

Metric tonnes

Benchmarks

Contract price; premium over 60/70

Typical cargo

Tank truck, ISO tank, drums

Incoterms

DAP, FCA, FOB

Notes

Priced at a premium over plain bitumen; the premium varies by market.

پالایشگاه‌هایی که آن را تولید می‌کنند: پیشنهاد ما

73 پالایشگاه فهرست‌شده این محصول را تولید می‌کنند که 22 تا از آن‌ها در خلیج فارس، ایران و عراق است. پالایشگاه‌های خلیج فارس را اول می‌آوریم، سپس واحدهای در حال بهره‌برداری، و بعد بر اساس ظرفیت.

دیدن هر 73 مورد روی نقشه

ترمینال‌هایی که آن را جابه‌جا می‌کنند

می‌دانستید؟

💡 SBS is the polymer most often used to modify bitumen.

💡 Polymer modification raises elasticity and resistance to rutting.

خودتان را در مورد Polymer Modified Bitumen (PMB) بسنجید

پرسش 1 از 3 · امتیاز 0 · رکورد پیاپی 0

Common polymer in PMB?

موارد بیشتر در این گروه

منابع

با بیان خود PST و بر پایهٔ منابع بالا نوشته شده است. اطمینان از داده: medium. مقادیر معمول بسته به مبدأ و قرارداد فرق می‌کند، پس مشخصات را همیشه در قرارداد خودتان بخوانید.