پرش به محتوا

Bitumen and solids

Oxidised Bitumen (Blown Bitumen)

Oxidised bitumen is made by blowing air through hot bitumen. It is harder and less temperature-sensitive than paving bitumen.

← همهٔ محصولاتنام‌های دیگر: Blown bitumen, Industrial bitumen, 85/25, 115/15, Roofing bitumen

  • نقطهٔ اشتعالTypically above 240 C (varies by grade)
  • چگالی1020 to 1060 kg/m³
  • گرانرویSoftening point 85 to 115 C
  • گوگرد1 to 4%
  • خطرUN3257 for hot bitumen shipped as an elevated temperature liquid, Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)
رنگ معمول، ظرف شیشه‌ای آزمایشگاهی
نمونهٔ Oxidised Bitumen (Blown Bitumen) در شیشهٔ آزمایشگاهی، با رنگ معمول آن
نمونه‌ای از Oxidised Bitumen (Blown Bitumen) در ظرف شیشه‌ای آزمایشگاهی روی پس‌زمینه تیره استودیویی، تا رنگ آن به‌راحتی قابل ارزیابی باشد.
عکس مرجع
نحوه نگهداری و جابه‌جایی Oxidised Bitumen (Blown Bitumen) در عمل.

منبع تصاویر نمونه‌های شیشه‌ای آزمایشگاهی از روی عکس‌های مرجع در ویکی‌مدیا کامنز ساخته شده‌اند، اثر Chemik10 (CC BY-SA 2.5) و یک عکس نمونهٔ نفتی با مجوز CC0.

مایع را هم بزنید تا غلظت آن را حس کنید

ماوس یا انگشت را روی مایع حرکت دهید. برای هم‌زدن شدیدتر، فشار دهید و بکشید. صفحه‌کلید: کلیدهای جهت‌دار هم می‌زنند و Space تکان می‌دهد.

نیمه‌جامد
رنگ بر اساس رنگ معمول Oxidised Bitumen (Blown Bitumen) است.
رقیق و روانغلیظ و سنگین

نیمه‌جامد در دمای عادی نیمه‌جامد است. فقط آهسته می‌خزد و برای پمپ شدن باید گرم شود.

گرانروی معمول بر اساس داده‌هاSoftening point 85 to 115 C

سرعت هم‌زدن
0 px/s
حرکت مایع
0%
آرام‌گرفتن پس از
-
سطح
ساکن

این رده فقط راهنمای حس مایع است. عدد گرانروی نمایش‌داده‌شده همان است که در داده‌های مشخصات آمده.

ظاهر محصول

Black, hard

کاربردها

  • Roofing
  • Waterproofing
  • Pipe coating
  • Sealants

جابه‌جایی و ایمنی

  • Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing.
  • Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

ویژگی‌های معمول

ظاهر
Black, hard
چگالی در 15 °C
1020 to 1060 kg/m³
نقطهٔ اشتعال
Typically above 240 C (varies by grade)
گرانروی
Softening point 85 to 115 C
نقطهٔ ریزش
Not applicable
گوگرد معمول
1 to 4%

◉What it is

Blown bitumen is partly oxidised with air at high temperature after distillation, making it harder (Wikipedia). Grades such as 85/25 and 115/15 are named by softening point and penetration. It is used for roofing felts, waterproofing, pipe coating, and as a sealant. It is less suitable for roads because it is brittle at low temperature.

⬡What it is made of

Asphaltene-rich bitumen.

⚛شیمی

Oxygen causes dehydrogenation and linking of molecules, raising asphaltene content and softening point.

⚙How it is made

Bitumen is heated to 230 to 280 C in a blowing tower and air is bubbled through for hours.

▶How it works

Lower penetration and higher softening point give resistance to flow at high temperature.

▣Storage, loading and inspection

Store in insulated, heated tanks at 150 to 180 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing.

★Why it matters in the Gulf

Oxidised grades are used for roofing and pipe coating. Gulf production and export details are not stated.

مولکول‌های کلیدی

استانداردها و مشخصات

EN 13304European framework specification for oxidised bitumens.
ASTM D312Asphalt used in roofing.
IS 702Indian standard for industrial bitumen.

خطرات

UN3257 for hot bitumen shipped as an elevated temperature liquidکلاس Class 9 (elevated temperature liquid, n.o.s., at or above 100 C and below its flash point)

Typically stored and moved at about 150 C (Wikipedia). Hot bitumen causes severe burns, and fumes can contain H2S and polycyclic aromatics. Check the local ADR/IMDG classification, which depends on the product and temperature.

نحوهٔ معامله

Units

Metric tonnes; bags; drums

Benchmarks

Contract

Typical cargo

Drums, bags, bulk

Incoterms

FOB, CIF

Notes

Specialty.

پالایشگاه‌هایی که آن را تولید می‌کنند: پیشنهاد ما

54 پالایشگاه فهرست‌شده این محصول را تولید می‌کنند که 17 تا از آن‌ها در خلیج فارس، ایران و عراق است. پالایشگاه‌های خلیج فارس را اول می‌آوریم، سپس واحدهای در حال بهره‌برداری، و بعد بر اساس ظرفیت.

دیدن هر 54 مورد روی نقشه

ترمینال‌هایی که آن را جابه‌جا می‌کنند

می‌دانستید؟

💡 Blown bitumen is partly oxidised with air at high temperature, which makes it harder (Wikipedia).

💡 Roofing membranes rely on it.

خودتان را در مورد Oxidised Bitumen (Blown Bitumen) بسنجید

پرسش 1 از 3 · امتیاز 0 · رکورد پیاپی 0

How is oxidised bitumen made?

موارد بیشتر در این گروه

منابع

با بیان خود PST و بر پایهٔ منابع بالا نوشته شده است. اطمینان از داده: medium. مقادیر معمول بسته به مبدأ و قرارداد فرق می‌کند، پس مشخصات را همیشه در قرارداد خودتان بخوانید.