सामग्री पर जाएँ

Middle distillates

Marine Diesel DMB

DMB is an ISO 8217 distillate marine fuel that may contain traces of residual oil. It has a higher allowed viscosity and density than DMA.

← सभी उत्पादअन्य नाम: DMB, Marine diesel oil (MDO), Marine diesel

  • फ़्लैश पॉइंटMin 60 C
  • घनत्व800 to 900 kg/m³
  • विस्कॉसिटीMax 11.0 mm2/s at 40 C
  • ठंड में प्रवाहWinter max 0 C; summer max 6 C (ISO 8217)
  • सल्फरMax 0.50% globally under MARPOL; 0.10% in ECAs where used
  • क्वथनांक सीमा170 to 400 °C
सामान्य रंग, प्रयोगशाला काँच
Marine Diesel DMB का प्रयोगशाला काँच नमूना, उसके सामान्य रंग में
गहरे स्टूडियो बैकग्राउंड पर प्रयोगशाला के काँच में Marine Diesel DMB का नमूना, ताकि रंग आसानी से परखा जा सके।
संदर्भ तस्वीर
व्यवहार में Marine Diesel DMB का भंडारण और परिवहन कैसे होता है।

चित्र श्रेय प्रयोगशाला काँच के नमूने Wikimedia Commons पर मौजूद संदर्भ तस्वीरों से बनाए गए हैं, द्वारा Chemik10 (CC BY-SA 2.5) और एक CC0 पेट्रोलियम नमूना फ़ोटो. तस्वीर: संदर्भ तस्वीर से बनाई गई, द्वारा Грищук ЮН, CC BY-SA 3.0, Wikimedia Commons के ज़रिए.

तरल को हिलाकर उसका गाढ़ापन महसूस करें

माउस या उँगली तरल के ऊपर चलाएँ। ज़ोर से हिलाने के लिए दबाकर खींचें। कीबोर्ड: तीर कुंजियाँ हिलाती हैं, Space झकझोरता है।

पतला
रंग Marine Diesel DMB के सामान्य रंग के अनुसार है।
पतला और ढीलागाढ़ा और भारी

पतला हल्का और सहज बहने वाला। लहरें तेज़ी से चलती हैं और धीरे-धीरे मिटती हैं।

डेटा से सामान्य श्यानताMax 11.0 mm2/s at 40 C

हिलाने की गति
0 px/s
तरल की गति
0%
शांत होने में लगा समय
-
सतह
स्थिर

यह श्रेणी केवल अनुभव का मार्गदर्शन है। दिखाया गया श्यानता मान विनिर्देश डेटा का मान है।

यह कैसा दिखता है

Dark to clear; may be hazy

इसका उपयोग कहाँ होता है

  • Ships with older medium-speed engines
  • Auxiliary engines and boilers
  • Tugs and fishing vessels

हैंडलिंग और सुरक्षा

  • Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
  • Marine fuel flash point min 60 C.

सामान्य गुण

रूप-रंग
Dark to clear; may be hazy
15 °C पर डेंसिटी
800 to 900 kg/m³
क्वथनांक सीमा
170 to 400 °C
फ़्लैश पॉइंट
Min 60 C
विस्कॉसिटी
Max 11.0 mm2/s at 40 C
पोर पॉइंट
Winter max 0 C; summer max 6 C (ISO 8217)
सामान्य सल्फ़र
Max 0.50% globally under MARPOL; 0.10% in ECAs where used

◉What it is

DMB is the second distillate grade in the ISO 8217 marine fuel standard. It is often called marine diesel oil (MDO). Unlike DMA, it is allowed to contain a small amount of residual material because it can be contaminated by residual oil in the supply chain. It is generally cloudy and slightly darker than DMA. It is mainly used by ships with older engines that tolerate a higher viscosity limit of 11 mm2/s at 40 C and by ships that do not need to burn the cleanest grade.

⬡What it is made of

Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.

⚛रसायन विज्ञान

Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.

⚙How it is made

Distilled gasoil blended with small amounts of heavier gasoil or cutter streams.

▶How it works

Burns in diesel engines, sometimes requires slight heating in cold climates. Higher viscosity and density than DMA make it cheaper.

▣Storage, loading and inspection

Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.

★Why it matters in the Gulf

Distillate grades are available at Fujairah, but DMB-specific availability is not stated.

मुख्य अणु

मानक और स्पेसिफिकेशन

ISO 8217DMB limits: viscosity 11.0 mm2/s max at 40 C, density 900 kg/m3 max, flash point 60 C min.
MARPOL Annex VISulphur limits (0.50% global, 0.10% in ECAs).

ख़तरे

UN1202 (diesel fuel or gas oil)क्लास Class 3, packing group III (when shipped as dangerous goods)

Marine fuel flash point min 60 C.

इसका व्यापार कैसे होता है

Units

Metric tonnes

Benchmarks

Platts MGO-based assessments with a small discount to DMA

Typical cargo

Barge or tanker deliveries

Incoterms

As MGO

Notes

DMB trades less than DMA because the DMA grade has become the standard.

इसे बनाने वाली रिफ़ाइनरियाँ: हमारे सुझाव

152 सूचीबद्ध रिफ़ाइनरियाँ यह उत्पाद बनाती हैं, उनमें से 42 खाड़ी, ईरान और इराक़ में हैं। हम पहले खाड़ी के प्लांट, फिर चालू प्लांट, फिर क्षमता के हिसाब से रखते हैं।

नक़्शे पर सभी 152 देखें

इसे संभालने वाले टर्मिनल

क्या आप जानते हैं

💡 DMB is sometimes simply called MDO.

💡 DMB is allowed a higher viscosity (11.0 mm2/s) than DMA (6.0 mm2/s).

Marine Diesel DMB पर ख़ुद को परखें

सवाल 1/3 · स्कोर 0 · लकीर 0

What is the max viscosity of DMB at 40 C?

इस समूह में और

स्रोत

ऊपर दिए स्रोतों के आधार पर PST के अपने शब्दों में लिखा गया। डेटा की विश्वसनीयता: medium। सामान्य मान मूल और अनुबंध के अनुसार बदलते हैं, इसलिए हमेशा अपने अनुबंध का स्पेसिफिकेशन पढ़ें।