Middle distillates
Gasoil 50 ppm
Gasoil 50 ppm is a middle distillate with sulphur limited to 50 ppm (0.005% m/m). It is a common export diesel grade for markets whose vehicle standards do not yet require 10 ppm.
← सभी उत्पादअन्य नाम: Diesel 50 ppm, Euro 4 diesel, Gasoil 0.005% S
- फ़्लैश पॉइंटAbove 55 C typical (min 52 to 60 C depending on contract)
- घनत्व820 to 860 kg/m³
- विस्कॉसिटी2.0 to 4.5 mm2/s at 40 C typical
- सल्फरMax 50 ppm (0.005% m/m)
- क्वथनांक सीमा170 to 375 °C
- खतराUN1202, Class 3 flammable liquid, packing group III (ADR/IMDG)


चित्र श्रेय प्रयोगशाला काँच के नमूने Wikimedia Commons पर मौजूद संदर्भ तस्वीरों से बनाए गए हैं, द्वारा Chemik10 (CC BY-SA 2.5) और एक CC0 पेट्रोलियम नमूना फ़ोटो. तस्वीर: संदर्भ तस्वीर से बनाई गई, द्वारा DanTD, CC BY-SA 3.0, Wikimedia Commons के ज़रिए.
तरल को हिलाकर उसका गाढ़ापन महसूस करें
माउस या उँगली तरल के ऊपर चलाएँ। ज़ोर से हिलाने के लिए दबाकर खींचें। कीबोर्ड: तीर कुंजियाँ हिलाती हैं, Space झकझोरता है।
पतला हल्का और सहज बहने वाला। लहरें तेज़ी से चलती हैं और धीरे-धीरे मिटती हैं।
डेटा से सामान्य श्यानता2.0 to 4.5 mm2/s at 40 C typical
- हिलाने की गति
- 0 px/s
- तरल की गति
- 0%
- शांत होने में लगा समय
- -
- सतह
- स्थिर
यह श्रेणी केवल अनुभव का मार्गदर्शन है। दिखाया गया श्यानता मान विनिर्देश डेटा का मान है।
यह कैसा दिखता है
Clear to pale yellow, may be dyed by local rule
इसका उपयोग कहाँ होता है
- Road diesel in markets that still allow this sulphur level
- Power generation and industrial burners
- Mining and construction equipment
- Agricultural and fishing vessels
हैंडलिंग और सुरक्षा
- Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
- Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
सामान्य गुण
- रूप-रंग
- Clear to pale yellow, may be dyed by local rule
- 15 °C पर डेंसिटी
- 820 to 860 kg/m³
- क्वथनांक सीमा
- 170 to 375 °C
- फ़्लैश पॉइंट
- Above 55 C typical (min 52 to 60 C depending on contract)
- विस्कॉसिटी
- 2.0 to 4.5 mm2/s at 40 C typical
- पोर पॉइंट
- Varies by season
- सामान्य सल्फ़र
- Max 50 ppm (0.005% m/m)
◉What it is
Gasoil 50 ppm is a diesel-range fuel that has been hydrotreated to a moderate sulphur level. It is sold to countries and industries that use it for road transport, power generation and machinery. The sulphur level matches Euro 4 era vehicle rules, so engines with advanced exhaust filters should not use it. It has the same basic boiling range and cetane behaviour as 10 ppm diesel but a higher sulphur content. Contracts often state the exact sulphur limit, density, cetane index, flash point and distillation requirements. Intermediate grade between 500 ppm and 10 ppm.
⬡What it is made of
Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.
⚛रसायन विज्ञान
Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.
⚙How it is made
Atmospheric distillation provides straight-run gasoil which is hydrotreated at less severity than 10 ppm production. Blending with other treated cuts adjusts density and cold flow.
▶How it works
Sulphur burns to sulphur oxides, so higher sulphur means more SO2 and particulate emissions and faster wear on catalysts. Cetane and cold-flow behave like other diesel grades. Because sulphur is moderate, natural lubricity is generally adequate without extra additive.
▣Storage, loading and inspection
Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
★Why it matters in the Gulf
Gulf refiners export 50 ppm gasoil to importers whose standards sit between 500 ppm and 10 ppm, with storage and blending at Fujairah. Volumes are not stated.
मुख्य अणु
मानक और स्पेसिफिकेशन
| EN 590 (older editions) | European road diesel was limited to 50 mg/kg sulphur from 2005, before the 10 mg/kg limit from 2009 (Wikipedia). |
|---|---|
| ASTM D975 S15 and S500 | US grades with 15 ppm and 500 ppm maximum sulphur; there is no US 50 ppm grade. |
| Contract or national specification | Many importing countries set their own limits. |
ख़तरे
Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
इसका व्यापार कैसे होता है
Units
Metric tonnes, with barrels (about 7.5 bbl per tonne at typical density) and cubic metres used for pricing and storage.
Benchmarks
Platts FOB Arab Gulf gasoil assessments; sulphur grade quoted separately from the 10 ppm price
Typical cargo
Typically 30,000 mt MR parcels or 5,000 to 10,000 mt coastal cargoes
Incoterms
FOB (Arab Gulf load port), CFR or CIF (destination), DAP for inland deliveries; FCA for road or rail.
Notes
Pricing usually carries a differential to 10 ppm diesel because of the lower value of the higher-sulphur grade.
इसे बनाने वाली रिफ़ाइनरियाँ: हमारे सुझाव
152 सूचीबद्ध रिफ़ाइनरियाँ यह उत्पाद बनाती हैं, उनमें से 42 खाड़ी, ईरान और इराक़ में हैं। हम पहले खाड़ी के प्लांट, फिर चालू प्लांट, फिर क्षमता के हिसाब से रखते हैं।
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionएक्सपोर्ट एक्सेस
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingएक्सपोर्ट एक्सेस
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionएक्सपोर्ट एक्सेस
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionएक्सपोर्ट एक्सेस
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperatingएक्सपोर्ट एक्सेस
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingएक्सपोर्ट एक्सेस
इसे संभालने वाले टर्मिनल
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
क्या आप जानते हैं
💡 50 ppm equals 0.005 percent by mass.
💡 The EU moved from 50 mg/kg to 10 mg/kg diesel sulphur from 2009 (Wikipedia).
Gasoil 50 ppm पर ख़ुद को परखें
What is the sulphur limit in Gasoil 50 ppm?
इस समूह में और
- Jet A-1
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 500 ppm
- Heating Oil
- Automotive Gasoil (AGO)
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- Marine Diesel DMB
- LSMGO (0.1% Sulphur ECA Fuel)
- Biodiesel Blends (FAME, B7 to B20)
स्रोत
ऊपर दिए स्रोतों के आधार पर PST के अपने शब्दों में लिखा गया। डेटा की विश्वसनीयता: medium। सामान्य मान मूल और अनुबंध के अनुसार बदलते हैं, इसलिए हमेशा अपने अनुबंध का स्पेसिफिकेशन पढ़ें।







