सामग्री पर जाएँ

Middle distillates

Jet A-1

Jet A-1 is the standard kerosene-type fuel for civil aircraft turbines worldwide outside the United States. It has a freezing point of minus 47 C and a flash point of at least 38 C.

← सभी उत्पादअन्य नाम: Jet fuel, Aviation turbine fuel, ATF, Kerosene (jet)

  • फ़्लैश पॉइंट38 °C
  • घनत्व775 to 840 kg/m³
  • विस्कॉसिटीMax 8.0 mm2/s at minus 20 C (typical limit in the specification)
  • ठंड में प्रवाहFreezing point max minus 47 C
  • सल्फरUp to 0.30 % m/m (specification limit); typically much lower
  • क्वथनांक सीमा145 to 300 °C
सामान्य रंग, प्रयोगशाला काँच
Jet A-1 का प्रयोगशाला काँच नमूना, उसके सामान्य रंग में
गहरे स्टूडियो बैकग्राउंड पर प्रयोगशाला के काँच में Jet A-1 का नमूना, ताकि रंग आसानी से परखा जा सके।
संदर्भ तस्वीर
व्यवहार में Jet A-1 का भंडारण और परिवहन कैसे होता है।

चित्र श्रेय प्रयोगशाला काँच के नमूने Wikimedia Commons पर मौजूद संदर्भ तस्वीरों से बनाए गए हैं, द्वारा Chemik10 (CC BY-SA 2.5) और एक CC0 पेट्रोलियम नमूना फ़ोटो.

तरल को हिलाकर उसका गाढ़ापन महसूस करें

माउस या उँगली तरल के ऊपर चलाएँ। ज़ोर से हिलाने के लिए दबाकर खींचें। कीबोर्ड: तीर कुंजियाँ हिलाती हैं, Space झकझोरता है।

पतला
रंग Jet A-1 के सामान्य रंग के अनुसार है।
पतला और ढीलागाढ़ा और भारी

पतला हल्का और सहज बहने वाला। लहरें तेज़ी से चलती हैं और धीरे-धीरे मिटती हैं।

डेटा से सामान्य श्यानताMax 8.0 mm2/s at minus 20 C (typical limit in the specification)

हिलाने की गति
0 px/s
तरल की गति
0%
शांत होने में लगा समय
-
सतह
स्थिर

यह श्रेणी केवल अनुभव का मार्गदर्शन है। दिखाया गया श्यानता मान विनिर्देश डेटा का मान है।

यह कैसा दिखता है

Clear and bright, colourless to pale straw. Free of visible water, dirt and haze. Colour is measured on the Saybolt scale: +30 is water-white, and a fuel that has turned yellow or dark has usually been contaminated or has aged.

इसका उपयोग कहाँ होता है

  • Commercial aviation turbine fuel
  • Blending with sustainable aviation fuel (SAF)

हैंडलिंग और सुरक्षा

  • Handled in dedicated clean systems with water separators and filters, joint inspection controls (JIG standards), and release certificates (Refinery Certificate of Quality).
  • Flammable; static buildup in handling; antistatic additive used.

सामान्य गुण

रूप-रंग
Clear, colourless to straw
15 °C पर डेंसिटी
775 to 840 kg/m³
क्वथनांक सीमा
145 to 300 °C
फ़्लैश पॉइंट
38 °C
विस्कॉसिटी
Max 8.0 mm2/s at minus 20 C (typical limit in the specification)
पोर पॉइंट
Freezing point max minus 47 C
सामान्य सल्फ़र
Up to 0.30 % m/m (specification limit); typically much lower

◉What it is

Jet A-1 is a carefully controlled kerosene cut with a carbon range of about 8 to 16. It must meet tight limits for freezing point, flash point, thermal stability and cleanliness because it flows through aircraft fuel systems at altitude. It is made by distilling and treating crude oil, and may include approved additives such as antistatic additive, corrosion inhibitor and icing inhibitor. Jet A-1 contrasts with the US Jet A, which has a slightly higher freezing point of minus 40 C. Sustainable aviation fuel can be blended in up to approved limits.

⬡What it is made of

C8 to C16 paraffins, naphthenes and aromatics.

⚛रसायन विज्ञान

Kerosene molecules are medium-length alkanes and cycloalkanes with some aromatics. Straight chains of this length would freeze at low temperature, so the freezing point is controlled by composition. Aromatics help seals swell but form soot, so they are limited. Sulphur is limited to 0.30 percent mass by specification.

⚙How it is made

Straight-run kerosene from the crude distillation unit, treated by hydrotreating or Merox sweetening, with additives. Hydrocracker kerosene is also used.

▶How it works

A low freezing point keeps fuel flowing at altitude, the flash point ensures safe ground handling, and thermal stability prevents deposits in hot engine sections. Energy per kilogram is high at roughly 43 MJ/kg.

▣Storage, loading and inspection

Handled in dedicated clean systems with water separators and filters, joint inspection controls (JIG standards), and release certificates (Refinery Certificate of Quality).

★Why it matters in the Gulf

The Gulf is a major jet fuel hub, with supply from regional refineries and storage at Fujairah. Wikipedia reports about 10 million cubic metres of refined-product storage in the Fujairah oil industry zone. Verified jet fuel volumes were not retrieved.

मुख्य अणु

मानक और स्पेसिफिकेशन

DEF STAN 91-091UK Ministry of Defence specification for Jet A-1.
ASTM D1655Standard specification for aviation turbine fuels (Jet A and Jet A-1).
IATA Guidance Material (Kerosene Type)Industry guidance for aviation fuel quality.

ख़तरे

UN1863 (fuel, aviation, turbine engine)क्लास Class 3 flammable liquid, packing group III

Flammable; static buildup in handling; antistatic additive used.

इसका व्यापार कैसे होता है

Units

Barrels or metric tonnes

Benchmarks

Platts Jet Kero FOB Arab Gulf, Singapore, NWE

Typical cargo

LR1 or MR tankers 35,000 to 75,000 tonnes

Incoterms

FOB, CFR, DAP at airport

Notes

Release certificate and fuel quality must match DEF STAN 91-091 or ASTM D1655.

इसे बनाने वाली रिफ़ाइनरियाँ: हमारे सुझाव

76 सूचीबद्ध रिफ़ाइनरियाँ यह उत्पाद बनाती हैं, उनमें से 26 खाड़ी, ईरान और इराक़ में हैं। हम पहले खाड़ी के प्लांट, फिर चालू प्लांट, फिर क्षमता के हिसाब से रखते हैं।

नक़्शे पर सभी 76 देखें

इसे संभालने वाले टर्मिनल

क्या आप जानते हैं

💡 Jet A-1 has a freezing point of minus 47 C, while US Jet A is minus 40 C.

💡 Jet A-1 requires an antistatic additive; Jet A does not (Wikipedia).

Jet A-1 पर ख़ुद को परखें

सवाल 1/3 · स्कोर 0 · लकीर 0

Jet A-1 maximum freezing point is:

PST स्पेसिफिकेशन पेज देखें

इस समूह में और

स्रोत

ऊपर दिए स्रोतों के आधार पर PST के अपने शब्दों में लिखा गया। डेटा की विश्वसनीयता: medium। सामान्य मान मूल और अनुबंध के अनुसार बदलते हैं, इसलिए हमेशा अपने अनुबंध का स्पेसिफिकेशन पढ़ें।