Passare al contenuto

Solvents and chemicals

MTBE (Methyl Tert-Butyl Ether)

MTBE is a gasoline additive made from methanol and isobutylene that raises octane number. It has a boiling point of about 55 C.

← Tutti i prodottiDetto anche: Methyl tertiary-butyl ether, Gasoline oxygenate

  • Punto di infiammabilità-33 C
  • Densità740 to 745 kg/m³
  • ViscositàAbout 0.35 mPa.s at 20 C
  • Flusso a freddoFreezing point -109 C
  • ZolfoBelow 10 ppm
  • Intervallo di ebollizione55 to 56 °C
Colore tipico, vetro da laboratorio
Campione in vetro da laboratorio di MTBE (Methyl Tert-Butyl Ether), nel suo colore tipico
Un campione di MTBE (Methyl Tert-Butyl Ether) in vetro da laboratorio su sfondo scuro da studio, per valutare facilmente il colore.
Scala dei colori
I colori che MTBE (Methyl Tert-Butyl Ether) può presentare.

Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0.

Agitate il liquido per sentire quanto è denso

Muovete il mouse o un dito sul liquido. Premete e trascinate per agitare più forte. Tastiera: le frecce agitano, Spazio scuote.

Molto fluido
Il colore segue il colore tipico di MTBE (Methyl Tert-Butyl Ether).
Fluido e scorrevoleDenso e pesante

Molto fluido Sottile come l'acqua o più. Le onde corrono veloci e durano a lungo.

Viscosità tipica dai datiAbout 0.35 mPa.s at 20 C

Velocità di agitazione
0 px/s
Movimento del liquido
0%
Si calma dopo
-
Superficie
Fermo

La classe è solo una guida alla sensazione. Il valore di viscosità mostrato è quello dei dati di specifica.

Aspetto

Clear, colourless, ether-like odour

Dove si usa

  • Gasoline octane blending component
  • Solvent in labs
  • Medical use (gallstones)

Manipolazione e sicurezza

  • Store in closed, grounded steel or lined tanks with nitrogen blanketing or vapour recovery; no ignition sources; use flameproof equipment and earthing during loading to limit static. Sample under closed conditions (ASTM D4057 or D5842), test purity, colour, water and distillation. Inspectors check tank cleanliness and prior cargo history before loading.
  • Highly flammable; water contamination risk.

Proprietà tipiche

Aspetto
Clear, colourless, ether-like odour
Densità a 15 °C
740 to 745 kg/m³
Intervallo di ebollizione
55 to 56 °C
Punto di infiammabilità
-33 C
Viscosità
About 0.35 mPa.s at 20 C
Punto di scorrimento
Freezing point -109 C
Zolfo tipico
Below 10 ppm

◉What it is

MTBE is C5H12O, a volatile, flammable, colourless liquid used as an octane booster and oxygenate (Wikipedia). It is made from methanol and isobutylene. It has been used in US gasoline since 1979 as a replacement for lead. In the US, groundwater contamination led to state bans and a shift to ethanol. MTBE remains widely used in Asia, the Middle East and Europe.

⬡What it is made of

Single compound, purity above 98%.

⚛La chimica

The ether oxygen adds oxygen content and raises octane to about RON 117 (typical). The tertiary butyl group is bulky, making the molecule resistant to knocking.

⚙How it is made

Isobutylene from FCC or steam cracker or from TBA dehydration reacts with methanol over an acid ion exchange resin at 50 to 90 C.

▶How it works

In blend, MTBE raises RON and provides oxygen for cleaner combustion.

▣Storage, loading and inspection

Store in closed, grounded steel or lined tanks with nitrogen blanketing or vapour recovery; no ignition sources; use flameproof equipment and earthing during loading to limit static. Sample under closed conditions (ASTM D4057 or D5842), test purity, colour, water and distillation. Inspectors check tank cleanliness and prior cargo history before loading.

★Why it matters in the Gulf

MTBE is made where methanol and isobutylene are available. Wikipedia names Saudi Aramco as the world's largest producer. Other Gulf producers are not stated.

Molecole chiave

Norme e specifiche

EN 228European petrol specification, which allows ethers of five or more carbon atoms up to a limit.
ASTM D4814US gasoline specification.

Pericoli

UN2398Classe Class 3 flammable liquid, PG II

Highly flammable; water contamination risk.

Come si commercializza

Units

Metric tonnes

Benchmarks

Price assessments for MTBE in Singapore, Northwest Europe and the Arab Gulf

Typical cargo

Parcels of 2,000 to 40,000 mt

Incoterms

FOB, CFR, CIF; DAP for packaged or road deliveries

Notes

Parcel sizes vary.

Lo sapeva?

💡 MTBE has been used in US gasoline since 1979, replacing tetraethyl lead as an antiknock additive (Wikipedia).

💡 MTBE gives water an unpleasant taste below about 30 micrograms per litre (Wikipedia).

Si metta alla prova su MTBE (Methyl Tert-Butyl Ether)

Domanda 1 di 3 · Punteggio 0 · Serie 0

MTBE is made from?

Altro in questo gruppo

Fonti

Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: medium. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.