Solvents and chemicals
Para-Xylene (PX)
Para-xylene is the xylene isomer used to make purified terephthalic acid (PTA) and then PET plastic and polyester.
← Tutti i prodottiDetto anche: PX, p-Xylene, 1,4-dimethylbenzene, Paraxylene
- Punto di infiammabilitàAbout 25 C
- Densità860 to 865 kg/m³
- ViscositàAbout 0.65 mPa.s at 20 C
- Flusso a freddoFreezing point 13 C
- ZolfoBelow 1 ppm
- Intervallo di ebollizione138 to 139 °C

Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0.
Agitate il liquido per sentire quanto è denso
Muovete il mouse o un dito sul liquido. Premete e trascinate per agitare più forte. Tastiera: le frecce agitano, Spazio scuote.
Molto fluido Sottile come l'acqua o più. Le onde corrono veloci e durano a lungo.
Viscosità tipica dai datiAbout 0.65 mPa.s at 20 C
- Velocità di agitazione
- 0 px/s
- Movimento del liquido
- 0%
- Si calma dopo
- -
- Superficie
- Fermo
La classe è solo una guida alla sensazione. Il valore di viscosità mostrato è quello dei dati di specifica.
Aspetto
Clear, colourless
Dove si usa
- PTA and PET
- Polyester fibre
- Packaging bottles
Manipolazione e sicurezza
- Store in closed, grounded steel or lined tanks with nitrogen blanketing or vapour recovery; no ignition sources; use flameproof equipment and earthing during loading to limit static. Sample under closed conditions (ASTM D4057 or D5842), test purity, colour, water and distillation. Inspectors check tank cleanliness and prior cargo history before loading. PX can freeze at 13 C so heated lines may be required in winter.
- Freezes at 13 C so tanks may need heating.
Proprietà tipiche
- Aspetto
- Clear, colourless
- Densità a 15 °C
- 860 to 865 kg/m³
- Intervallo di ebollizione
- 138 to 139 °C
- Punto di infiammabilità
- About 25 C
- Viscosità
- About 0.65 mPa.s at 20 C
- Punto di scorrimento
- Freezing point 13 C
- Zolfo tipico
- Below 1 ppm
◉What it is
Para-xylene is a C8H10 aromatic with two methyl groups on opposite sides of the benzene ring. About 98 percent of production goes to terephthalic acid and dimethyl terephthalate, which are used to make PET bottles and polyester fibre (Wikipedia). It is made in aromatic complexes by isomerising and separating mixed xylenes using crystallisation or adsorption (Parex, Eluxyl). Purity of 99.7 percent or more is required.
⬡What it is made of
p-Xylene 99.7% min.
⚛La chimica
The symmetrical structure gives a high melting point of 13 C and allows chain linkage in polymer. Terephthalic acid is made by oxidation of the two methyl groups to carboxylic acid.
⚙How it is made
Mixed xylenes pass through an isomerisation unit and a selective adsorption or crystallisation unit to isolate PX.
▶How it works
PX is oxidised to PTA, which reacts with ethylene glycol to make PET.
▣Storage, loading and inspection
Store in closed, grounded steel or lined tanks with nitrogen blanketing or vapour recovery; no ignition sources; use flameproof equipment and earthing during loading to limit static. Sample under closed conditions (ASTM D4057 or D5842), test purity, colour, water and distillation. Inspectors check tank cleanliness and prior cargo history before loading. PX can freeze at 13 C so heated lines may be required in winter.
★Why it matters in the Gulf
Gulf Arab states have aromatics and paraxylene capacity or projects. Producer details and export volumes are not stated.
Molecole chiave
Norme e specifiche
| Contract specification | PX is sold on purity, typically 99.7% or higher; confirm the test methods with the supplier. |
|---|
Pericoli
Freezes at 13 C so tanks may need heating.
Come si commercializza
Units
Metric tonnes
Benchmarks
Platts PX CFR China/Taiwan, FOB Korea
Typical cargo
Parcel tankers 5,000 to 30,000 mt
Incoterms
FOB, CFR, CIF; DAP for packaged or road deliveries
Notes
China is the largest buyer.
Raffinerie che lo producono: i nostri suggerimenti
20 raffinerie censite producono questo prodotto, 7 delle quali nel Golfo, in Iran e in Iraq. Diamo la precedenza agli impianti del Golfo, poi a quelli in esercizio, poi a quelli per capacità.
- 1Ras Tanura Refinery
Saudi Arabia · 550,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAccesso all'esportazione
- 2SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionAccesso all'esportazione
- 3Petro Rabigh Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAccesso all'esportazione
- 4SASREF (Saudi Aramco Shell Refinery) Jubail
Saudi Arabia · 305,000 bpdGulf locationOperatingAccesso all'esportazione
- 5Aromatics Oman Complex (Sohar)
Oman · Not publishedGulf locationOperatingAccesso all'esportazione
- 6Jamnagar Refinery (Reliance)
India · 1,400,000 bpdOperatingDeep conversionAccesso all'esportazione
Lo sapeva?
💡 p-Xylene melts at about 13 C, so it can freeze in a cool tank (Wikipedia).
💡 PET bottles and polyester fibre come from terephthalic acid made from PX.
Si metta alla prova su Para-Xylene (PX)
PX makes?
Altro in questo gruppo
- White Spirit
- Hexane (n-Hexane, Commercial Hexane)
- Benzene
- Toluene
- Mixed Xylene
- MTBE (Methyl Tert-Butyl Ether)
- Ethylene (Refinery and Petrochemical Stream)
- Propylene (Refinery and Petrochemical Stream)
Fonti
Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: medium. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.





