Перейти к содержимому

← Все процессы

Hydrocracking

Refinery process

Hydrocracking splits heavy gas oil into jet fuel, diesel and naphtha in the presence of hydrogen and a dual-function catalyst. It gives clean, saturated products and is favoured where diesel and jet demand is high.

Сырьё
Vacuum gas oil, heavy distillates, and hydrogen
Производит
Jet fuel and diesel, Naphtha, LPG, Unconverted oil (lube base or FCC feed)
Температура
About 350 to 450
Давление
About 69 to 138
Катализатор
Bifunctional: metal hydrogenation sites on an acidic support

Технологическая схема

Что делает

Vacuum gas oil and other heavy distillates are mixed with hydrogen, heated and passed over a catalyst bed at high pressure. The catalyst has a metal function that adds hydrogen and an acid function that cracks carbon-carbon bonds. Large molecules break into smaller ones, which are immediately saturated, so the products are low in sulphur, nitrogen and aromatics. Mostly diesel and jet-range liquids are made, along with naphtha and some LPG. An unconverted oil stream can be recycled for more conversion or used as a high-quality lube base feed.

Шаг за шагом

  1. Feed and hydrogen are heated to reaction temperature
  2. A first-stage bed removes sulphur and nitrogen
  3. The stream enters the cracking beds where molecules split and are hydrogenated
  4. Quench hydrogen controls the strong heat release
  5. Effluent is cooled and separated from hydrogen
  6. Hydrogen is recycled and H2S is removed by amine
  7. A fractionator separates naphtha, jet, diesel and unconverted oil

Химия

Hydrocracking combines acid-catalysed carbon-carbon cleavage with metal-catalysed hydrogenation. Aromatics and olefins become saturated naphthenes and paraffins, and cracked fragments are capped with hydrogen so little coke forms. Isomerisation also occurs, giving branched paraffins with good cold-flow properties.

Реакции с отображением каждого атома

Hydrocracking of a long paraffinCCCCCCCCCCCCCCCC[H][H]CCCCCCCCCCCCCCCCC16H34 + H2 -> 2 C8H18C-C scission followed by hydrogen saturation.
Hydrogenation of naphthalene to tetralinc1ccc2ccccc2c1[H][H][H][H]C1CCc2ccccc2C1C10H8 + 2H2 -> C10H12Aromatic ring saturation.

Основное оборудование

  • Charge heater
  • High-pressure reactors
  • Hot and cold separators
  • Recycle gas compressor
  • Fractionator

Безопасность

Very high-pressure hydrogen is an explosion hazard and the reactions release much heat, so loss of quench can cause a temperature runaway.

В Персидском заливе

The Ruwais Refinery in Abu Dhabi has had a hydrocracker plant in its East complex since 1985, per the operator history summarised on Wikipedia.

Проверьте себя

Вопрос 1 из 3 · Счёт 0 · Серия 0

Which extra feed does hydrocracking require?

Связанное

Источники

Написано собственными словами PST по источникам выше. Достоверность данных: high. Реальные заводы различаются по конструкции и условиям работы.