Bitumen and solids
Bitumen Emulsion
Bitumen emulsion is a dispersion of bitumen droplets in water, stabilised by a soap. It can be applied cold without solvents.
← 全部产品又称: Cationic bitumen emulsion, Anionic emulsion, CRS-1, CSS-1, Emulsified asphalt
- 密度1000 to 1040 kg/m³
- 冷流性Not applicable; freezes below 0 C
- 硫1 to 4% on bitumen
- 危险性Not regulated (typically), Not dangerous goods


图片来源 实验室玻璃样品根据 Wikimedia Commons 上的参考照片制作,作者: Chemik10 (CC BY-SA 2.5) 以及一张 CC0 石油样品照片.
搅动液体,感受它有多稠
用鼠标或手指划过液体。按住并拖动可用力搅动。键盘:方向键搅动,空格键摇晃。
稠 很重。搅动时阻力大,只能缓慢流动。
- 搅动速度
- 0 像素/秒
- 液体运动
- 0%
- 静止所需时间
- -
- 表面
- 静止
该等级仅供手感参考。所示粘度数值以规格数据为准。
外观
Brown liquid
应用领域
- Tack coats
- Chip seals
- Slurry seals
- Cold recycling
装卸与安全
- Store at 10 to 85 C in tanks with gentle agitation; do not freeze; avoid mixing different emulsions.
- Not flammable; avoid freezing.
典型性质
- 外观
- Brown liquid
- 15 °C 密度
- 1000 to 1040 kg/m³
- 黏度
- Engler or Saybolt Furol viscosity
- 倾点
- Not applicable; freezes below 0 C
- 典型含硫量
- 1 to 4% on bitumen
◉What it is
Bitumen emulsion is made by milling hot bitumen into droplets of about 0.1 to 50 micrometres in water that contains an emulsifier. Wikipedia describes emulsions as colloidal mixtures stabilised with anionic or cationic emulsifiers and classed as rapid, medium or slow setting. The bitumen share varies by grade. When sprayed on a road the water evaporates or the emulsion breaks and the bitumen coats the stone.
⬡What it is made of
Bitumen and water, with a small share of emulsifier; the bitumen share varies by grade.
⚛化学成分
Emulsifier molecules have a hydrophilic head and a hydrocarbon tail. They surround bitumen droplets and give them an electric charge so they stay dispersed.
⚙How it is made
A colloid mill shears bitumen at 120 to 150 C with hot water and emulsifier at 40 to 60 C.
▶How it works
The emulsion breaks when droplets lose charge on contact with stone, leaving a bitumen film.
▣Storage, loading and inspection
Store at 10 to 85 C in tanks with gentle agitation; do not freeze; avoid mixing different emulsions.
★Why it matters in the Gulf
Emulsion is used for chip seals, tack coats and road maintenance. Regional plant details are not stated.
主要分子
标准与规格
| EN 13808 | European cationic emulsions |
|---|---|
| ASTM D2397 | Cationic emulsified asphalt |
| ASTM D977 | Anionic emulsified asphalt |
危害
Not flammable; avoid freezing.
交易方式
Units
Metric tonnes; drums
Benchmarks
Contract
Typical cargo
Tank truck, ISO tank
Incoterms
DAP, FCA
Notes
Local production close to use because of water content.
可生产此产品的炼厂:我们的推荐
已收录 54 家炼厂生产此产品,其中 17 家位于海湾、伊朗和伊拉克。我们按以下顺序排列:海湾工厂优先,其次是在产工厂,再按产能。
- 1Ras Tanura Refinery
Saudi Arabia · 550,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversion导出权限
- 2Mina Al-Ahmadi Refinery
Kuwait · 346,000 bpdGulf locationOperating导出权限
- 3Arak (Imam Khomeini) Refinery
Iran · 250,000 bpdGulf locationOperating
- 4Daura Refinery
Iraq · 140,000 bpdGulf locationOperating
- 5Karbala Refinery
Iraq · 140,000 bpdGulf locationOperating
- 6Riyadh Refinery
Saudi Arabia · 126,000 bpdGulf locationOperatingDeep conversion
可处理该产品的码头
- Torosport Ceyhan Bitumen Terminal
Turkey
- Heydar Aliyev Baku Oil Refinery
Azerbaijan
- Turkmenbashi Oil Refinery
Turkmenistan
- Seydi Oil Refinery
Turkmenistan
你知道吗
💡 Bitumen emulsions are colloidal mixtures of bitumen and water, often with particles of 0.1 to 50 micrometres (Wikipedia).
💡 Cationic emulsions are covered by EN 13808 (Wikipedia).
测验您对 Bitumen Emulsion 的掌握
What stabilises a bitumen emulsion?
该组更多内容
- Bitumen 40/50, 60/70 and 80/100 (Paving Grades)
- Polymer Modified Bitumen (PMB)
- Cutback Bitumen
- Oxidised Bitumen (Blown Bitumen)
- Petroleum Coke (Green, Calcined, Fuel Grade)
- Sulphur (Granular and Molten)
来源
由 PST 依据上述来源自行撰写。数据可信度:medium。典型值因产地和合同而异,请务必以您自己合同中的规格为准。






