跳至正文
登录申请报价

Bitumen and solids

Cutback Bitumen

Cutback bitumen is bitumen thinned with a petroleum solvent so it can be applied cold. The solvent evaporates and leaves the hard bitumen.

← 全部产品又称: Cut-back bitumen, RC, MC, SC cutbacks, Road oil, Rapid curing cutback

  • 密度920 to 1000 kg/m³
  • 硫1 to 4%
  • 危险性UN1999, Class 3 flammable liquid (tars, liquid, including road oils and cutback bitumens)
典型颜色,实验室玻璃
Cutback Bitumen 的实验室玻璃样品,呈典型颜色
Cutback Bitumen 的实验室玻璃样品,深色影棚背景,便于判断颜色。
参考照片
Cutback Bitumen 在实际中如何储存和运输。

图片来源 实验室玻璃样品根据 Wikimedia Commons 上的参考照片制作,作者: Chemik10 (CC BY-SA 2.5) 以及一张 CC0 石油样品照片.

搅动液体,感受它有多稠

用鼠标或手指划过液体。按住并拖动可用力搅动。键盘:方向键搅动,空格键摇晃。

稠
颜色与 Cutback Bitumen 的典型颜色一致。
稀而松散稠而重

稠 很重。搅动时阻力大,只能缓慢流动。

搅动速度
0 像素/秒
液体运动
0%
静止所需时间
-
表面
静止

该等级仅供手感参考。所示粘度数值以规格数据为准。

外观

Dark brown to black liquid

应用领域

  • Prime coat on granular base
  • Tack coat
  • Cold mix patching

装卸与安全

  • Store in insulated, heated tanks at 60 to 100 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing. Flammable solvent: no open flame.
  • Flammable vapour; keep away from ignition.

典型性质

外观
Dark brown to black liquid
15 °C 密度
920 to 1000 kg/m³
黏度
Measured by Saybolt Furol or Engler viscosity
倾点
Not applicable
典型含硫量
1 to 4%

◉What it is

Cutback bitumen is made by dissolving bitumen in a volatile solvent such as naphtha, kerosene or diesel. The solvent type decides the curing speed: rapid curing (RC) uses naphtha, medium curing (MC) uses kerosene and slow curing (SC) uses gasoil. It is used for tack coats, prime coats and cold patching. Cutbacks emit volatile organic compounds, so many countries have shifted to emulsions.

⬡What it is made of

Bitumen 60 to 80% plus solvent 20 to 40%.

⚛化学成分

Solvent molecules lower the viscosity by breaking asphaltene clusters. After spraying, the solvent evaporates and the bitumen hardens.

⚙How it is made

Hot bitumen is blended with solvent at 100 to 140 C in tanks.

▶How it works

Applied by spray at 20 to 80 C, the solvent evaporates (cure) over minutes (RC) to days (SC).

▣Storage, loading and inspection

Store in insulated, heated tanks at 60 to 100 C; do not hold above 200 C for long because it ages and can foam if water is present. Avoid water contact (violent boiling). Sample with a heated sampler per ASTM D140 or EN 58 and test penetration, softening point and flash point. Trucks and ships need heating coils and loading arms with steam or thermal oil tracing. Flammable solvent: no open flame.

★Why it matters in the Gulf

Cutbacks are used in road works for prime coats, and VOC rules push use toward emulsions. Regional volumes are not stated.

主要分子

标准与规格

ASTM D2028Rapid curing cutback
ASTM D2027Medium curing cutback
ASTM D2026Slow curing cutback
IS 217India cutback bitumen

危害

UN1999船型级别 Class 3 flammable liquid (tars, liquid, including road oils and cutback bitumens)

Flammable vapour; keep away from ignition.

交易方式

Units

Metric tonnes; drums

Benchmarks

Contract

Typical cargo

Bulk or drums

Incoterms

FOB, DAP

Notes

Trade is smaller than for bitumen.

可生产此产品的炼厂:我们的推荐

已收录 54 家炼厂生产此产品,其中 17 家位于海湾、伊朗和伊拉克。我们按以下顺序排列:海湾工厂优先,其次是在产工厂,再按产能。

在地图上查看全部 54 个

可处理该产品的码头

你知道吗

💡 Cutback production is decreasing because solvents evaporate as VOCs.

💡 Bitumen is sometimes mixed with diesel oil or kerosene before shipping (Wikipedia).

测验您对 Cutback Bitumen 的掌握

第 1 题,共 3 题 · 得分 0 · 连对 0

What is cutback bitumen?

该组更多内容

来源

由 PST 依据上述来源自行撰写。数据可信度:medium。典型值因产地和合同而异,请务必以您自己合同中的规格为准。